Giant Telecom EX22480 User manual

– 0 –
EX22480 Cover

– 1 –
Precautions of Use
The quality of communication depends on the location and
environment of the base and the handset. The 22480 must be kept
away from sources of excessive heat (radiators, direct sunlight, etc.)
and protected against vibrations and dust. Never allow your telephone
to come into contact with water or other liquids or with aerosols. To
reduce the risk of interference and optimize reception, take particular
care to keep it away from the immediate vicinity of windows, large
metal objects, reinforced concrete, televisions, music centre, halogen
lamps or heating devices, fluorescent lighting, burglar alarms,
microwave ovens, computers, etc.
To clean the 22480, use a lightly moistened antistatic cloth
Information for DECT product:
The 22480 telephone is compliant with the DECTTM* standard. It is
designed to transmit and receive telephone calls and be connected to
the public telephone “Country”network.
*DECT is a trademark registered by ETSI.
IMPORTANT SAFETY
INSTRUCTIONS
BEFORE USING YOUR TELEPHONE EQUIPMENT,
BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK AND INJURY TO PERSONS,
INCLUDING THE FOLLOWING.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the
product.
3. Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a

– 2 –
damp cloth for cleaning.
4. Do not use this product near water, for example, near a
bath tub, wash bowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
5. Do not place this product on an unstable cart, stand or
table. The product may fall, causing serious damage to
the product.
6. Slots and openings in the cabinet and the back or bottom
are provided for ventilation. To protect it from
overheating, these openings must not be blocked or
covered. The openings should never be blocked by
placing the product on the bed, sofa, rug, or other similar
surface. This product should never be placed near or
over a radiator or heat register. This product should not
be placed in a built-in installation unless proper
ventilation is provided.
7. This product should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type of power supply to your home,
consult your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not
locate this product where the cord will be damaged by
person walking on it.
9. Do not overload wall outlet extension cords, as this can
result in the risk of fire or electric shock.
10. Never push objects of any kind into this product through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a risk of fire or
electric shock. Never spill liquid of any kind on this
product.
11. To reduce the risk of electric shock, do not disassemble
this product. Instead, when some repair work is required,
take the unit to a qualified technician. Opening or

– 3 –
removing covers may expose you to dangerous voltages
or other risks. Incorrect reassembly can cause electric
shock when the appliance is subsequently used.
12. Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
When the power supply cord or plug is damaged or
frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or water.
If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions because
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to normal
operation.
If the product has been dropped or cabinet has be
damaged.
If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk of
electrical shock from lightning.
Do not use the telephone to report a gas leak in the
vicinity of the leak.
Safety
In the event of danger, the mains adapter acts as 230V power
isolating device. It should therefore, as a precaution, be installed
close to the appliance and be easily accessible.
If the mains adapter fails, it must be replaced by an identical model.

– 4 –
If not connected to the mains power or if there is a mains power
failure, installations with cordless handsets will no longer work. You
will then be unable to make or receive calls in the event of an
emergency. This is why we recommend that you also have a
conventional telephone as a backup. The appliance is designed for
connection to an analogue telephone line class TRT3
(telecommunications network voltage).
! Do not use your telephone to notify a gas leak when you are in
the vicinity of the leak.
It is recommended that you avoid using this device during electrical
storms.
WARNING:
TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT
EXPOSE THIS PROCUCT TO RAIN OR MOISTURE.
THE LIGHTING
FLASH AND
ARROW HEAD
WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE”
INSINDE THE
PRODUCT.
CAUTION: TO
REDUCE THE RISK OF
ELECTRICAL SHOCK,
DO NOT REMOVE
COVER (OR BACK).
NO USER
SERVICEABLE PARTS
INSIDE. REFER
SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
THE
EXCLAMATION
WITHIN THE
TRIANGLE IS
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
SEE MARKING ON BOTTOM / BACK OF PRODUCT

– 5 –
Battery Safety Precautions
 Do not burn, disassemble, mutilate, or puncture. Like other
batteries of this type, toxic materials could be released which
can cause injury.
 To reduce the risk of fire or personal injury, use only the battery
listed in User’s Guide.
 Keep batteries out of children.
 Remove batteries if storing over 30 days.
 Do Not Use Alkaline or Non Rechargeable Batteries
CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replace only with GP battery GP60AAAHC – Ni-MH 1.2V 600mAh
or SANIK battery SN-AAA60HJ rechargeable battery or equivalent.
Only use rechargeable batteries with exactly the same specifications
as those supplied with the product. Using non-rechargeable or
non-conforming batteries can damage the product. The batteries
could split or leak if incorrectly inserted, opened or exposed to heat.
Never dispose of batteries in a fire: the cell could explode.
Check with local code for possible special disposal instruction.
Note: To ensure the battery charging properly, clean the charging
contacts on the handset and charger with a soft, dry cloth once a
month. Clean more often if the unit is subject to grease, dust or high
humidity.
Installation
Packaging Contents
Model: 22480 Solo pack Duo pack*

– 6 –
Base stations 1 1
Handsets 1 2
Power plugs 2 3
Telephone line 1 1
Batteries type
AAA, 1.2V, 600mAh 2 4
Charging station 1 2
Operating instructions 1+optional 1+optional
Please check the contents of the package carefully. If anything is
missing or shows signs of transport damage, do NOT put the
telephone into service! In such a case, contact either your sales outlet
with the purchase receipt.
Connecting the Base Station and Power Plug
Connecting the plugs to the corresponding sockets in the base station
(they can not be connected incorrectly because the sockets and plugs
are designed prevent reverse poling). Plug the telephone line in the
telephone connection socket. Insert the power plug at the other end in
the power outlet. The base station in now ready to operate.
Only use the connection cable supplied.
Phone jack
AC power outlet

– 7 –
Corded unit rear side view
CAUTION:
Plug the adapter to the socket outlet that near the equipment
and shall be easily accessible. Use only the Thomson Telecom power
supply that came with this unit. Using other power supplies may
damage the unit.
Connecting the charging station
Insert the power plug in the socket on the rear side of the charging
station. Insert the power plug at the other end in the power outlet. The
charging station is now ready to operate.
AC power outlet

– 8 –
Getting Started
 Install and Charge the Batteries
Insert two pieces AAA batteries in the compartment, ensuring correct
polarity and close the compartment.
 Place the handset in the remote charge unit to charge for 14
hours prior for first use. If you don’t properly charge the phone,
battery performance will be compromised.
Warning: The handset does not work and damaged if the wrong
batteries are inserted.
If batteries are empty, handset LCD will not has any display and
the handset will not response to any key. Handset is then required
to put back on Base Station / Charger cradle to charge. Handset
cannot be used until handset name and aerial icon appear. If
handset does not charged full before use, handset may emit
battery low alert tone and battery level indicator shows empty
Features
This cordless telephone is equipped with the following features:
 Digital cordless telephone complying to DECT standards

– 9 –
 Operation instruction in 10 languages
 Teleconference
 Call forwarding
 Internal, free communication between handsets
 Prefix dialing
 Automatic call answering on/off
 Call log function with caller list for 20 numbers or names
(network dependent)
 DOT MATRIX LCD display
(1-line icon + 1-line 12 dot matrix characters)
 Phone book memory with name and call number: 30 memories
in handset, 10 memories in base
 Extended redialing for 5 call numbers
 Microphone muting function
 Acoustic battery and range warning signals
 Key lock
 Key tone on/off
 10 incoming call ringing melodies
 Ringing volume control (5 levels and silent)
 DTMF/Pulse dialing
 Operation of up to 4 handsets
 Paging function from base station to handset
 Programmable number barring
 Up to 100 hours standby
 Up to 10 hours continuous call time
 Operation with 2 standard AAA batteries (Ni-MH)
 Adjustable flash time
*DECT = Digital Enhanced Cordless Telecommunications
Menu Structure (Handset)
CALL LOG
PHONE BOOK NEW ENTRY ENTER NUMBER ENTER NAME NORMAL RING