GIGA-BYTE TECHNOLOGY MZ01-CE0 User manual

MZ01-CE0
MZ01-CE1
AMD EPYC™ Single processor motherboard
User Manual
Rev. 2.0

Copyright
© 2019 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specifications and features in this manual may be made by GIGABYTE
without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or
published in any form or by any means without GIGABYTE's prior written permission.
Documentation Classications
In order to assist in the use of this product, GIGABYTE provides the following types of documentation:
 UserManual:detailedinformation&stepsabouttheinstallation,congurationandusethis
product (e.g. motherboard, server barebones), covering hardware and BIOS.

User Guide: detailed information about the installation & use of an add-on hardware or
  softwarecomponent(e.g.BMCrmware,rail-kit)compatiblewiththisproduct.
Quick Installation Guide: a short guide with visual diagrams that you can reference easily for
installation purposes of this product (e.g. motherboard, server barebones).
Please see the support section of the online product page to check the current availability of these
documents
For More Information
Forrelatedproductspecications,thelatestrmwareandsoftware,andotherinformation,pleasevisit
our website at: http://www.gigabyte.com.
For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our
reseller portal: http://reseller.b2b.gigabyte.com
For further technical assistance, please contact your GIGABYTE representative or visit
http://esupport.gigabyte.com/ to create a new support ticket.
For any general sales or marketing enquires, you may message GIGABYTE server directly by
email: server[email protected].

- 3 -
Table of Contents
MZ01-CE0/ MZ01-CE1 Motherboard Layout...................................................................6
Block Diagram .................................................................................................................8
Chapter 1 Hardware Installation .....................................................................................9
1-1 Installation Precautions.................................................................................... 9
1-2 ProductSpecications.................................................................................... 10
1-3 Installing and Removing the CPU and Heat Sink........................................... 12
1-4 Installing and Removing Memory................................................................... 13
1-4-1 8-ChannelMemoryConguration..........................................................................13
1-4-2 Installing and Removing a Memory Module ..........................................................14
1-4-3 DIMM Population Table .........................................................................................14
1-5 Installing and Removing the M.2 SSD Module............................................... 16
1-6 Back Panel Connectors.................................................................................. 17
1-7 Internal Connectors........................................................................................ 19
1-8 Jumper Settings ............................................................................................. 27
Chapter 2 BIOS Setup ..................................................................................................28
2-1 The Main Menu .............................................................................................. 30
2-2 Advanced Menu ............................................................................................. 33
2-2-1 Trusted Computing .................................................................................................34
2-2-2 PSP Firmware Versions..........................................................................................35
2-2-3 AST2500SuperIOConguration...........................................................................36
2-2-4 S5 RTC Wake Settings...........................................................................................39
2-2-5 Serial Port Console Redirection .............................................................................40
2-2-6 CPUConguration..................................................................................................44
2-2-7 PCI Subsystem Settings.........................................................................................45
2-2-8 USBConguration..................................................................................................47
2-2-9 NVMeConguration ...............................................................................................49
2-2-10 SATAConguration.................................................................................................50
2-2-11 TlsAuthConguration ............................................................................................51
2-2-12 NetworkStackConguration..................................................................................52
2-2-13 AMDMemCongurationStatus.............................................................................53
2-2-14 iSCSIConguration................................................................................................54
2-2-15 Intel(R) I210 Gigabit Network Connection..............................................................55
2-2-16 VLANConguration................................................................................................57
2-2-17 MACIPv4NetworkConguration...........................................................................59
2-2-18 MACIPv6NetworkConguration...........................................................................60
2-3 AMD CBS Menu............................................................................................. 62

- 4 -
2-3-1 CPU Common Options...........................................................................................63
2-3-2 DF Common Options..............................................................................................68
2-3-3 UMC Common Options ..........................................................................................73
2-3-4 NBIO Common Options..........................................................................................86
2-3-5 FCH Common Options ...........................................................................................92
2-3-6 NTB Common Options ...........................................................................................95
2-3-7 SOC Miscellaneous Control ...................................................................................96
2-4 AMD PBS Menu............................................................................................. 97
2-4-1 RAS ........................................................................................................................98
2-5 Chipset Setup Menu..................................................................................... 100
2-5-1 North Bridge .........................................................................................................101
2-6 Server Management Menu........................................................................... 102
2-6-1 System Event Log ................................................................................................104
2-6-2 View FRU Information ..........................................................................................105
2-6-3 BMCNetworkConguration.................................................................................106
2-6-4 IPv6BMCNetworkConguration.........................................................................107
2-7 Security Menu .............................................................................................. 108
2-7-1 Secure Boot .........................................................................................................109
2-8 Boot Menu.....................................................................................................111
2-8-1 UEFI NETWORK Drive BBS Priorities ................................................................113
2-8-2 UEFI Application Boot Priorities ................................................................. 114
2-9 Save & Exit Menu......................................................................................... 115
2-10 ABL POST Codes ........................................................................................ 116
2-10-1 StartProcessorTestPoints .....................................................................................116
2-10-2 Memory test points ...............................................................................................116
2-10-3 PMU Test Points ...................................................................................................116
2-10-4 Original Post Code ...............................................................................................117
2-10-5 CPU test points.....................................................................................................118
2-10-6 Topology test points..............................................................................................118
2-10-7 Extended memory test point.................................................................................118
2-10-8 Gnb Earlier init......................................................................................................119
2-10-9 PMU test points ....................................................................................................122
2-10-10 ABL0 test points ...................................................................................................122
2-10-11 ABL5 test points ...................................................................................................122
2-11 Agesa POST Codes..................................................................................... 126
2-11-1 Universal Post Code.............................................................................................126
2-11-2 [0xA1XX] For CZ only memory Postcodes...........................................................126
2-11-3 S3 Interface Post Code ........................................................................................129
2-11-4 PMU Post Code....................................................................................................129
2-11-5 [0xA5XX] assigned for AGESA PSP Module ........................................................129
2-11-6 [0xA9XX, 0xAAXX] assigned for AGESA NBIO Module .......................................132

- 5 -
2-11-7 [0xACXX] assigned for AGESA CCX Module .......................................................134
2-11-8 [0xADXX] assigned for AGESA DF Module..........................................................135
2-11-9 [0xAFXX] assigned for AGESA FCH Module........................................................135
2-12 BIOS POST Beep code (AMI standard)....................................................... 137
2-12-1 PEI Beep Codes...................................................................................................137
2-12-2 DXE Beep Codes .................................................................................................137

- 6 -
MZ01-CE0/ MZ01-CE1 Motherboard Layout
21
21
CPU
DIMM_P0_G0
DIMM_P0_H0
DIMM_P0_E0
DIMM_P0_F0
DIMM_P0_B0
DIMM_P0_A0
DIMM_P0_D0
DIMM_P0_C0
1 2 3 4 5 6 8
7910
13 12 11
14
15
16
17
18
1920
21
22
23
25
24
26
27
29 30
31
32 33 34 35
36 37
28

- 7 -
Item Code Description
1 VGA VGA Port
2 10GLAN1 10G LAN Port #1 (MZ01-CE0 Only)
3 LPC_TPM TPM Module Connector
4 10GLAN2 10G LAN Port #2 (MZ01-CE0 Only)
5 SYS_FAN2 System Fan Connector #2
6 USB3_MLAN Server Management LAN Port (top)/ USB 3.0 Ports (bottom)
7 SYS_FAN1 System Fan Connector #3
8 LAN1_2 GbE LAN Port #1 (top)/ Port #2 (bottom)
9 SW_PWR Power Button (top)/ ID Button (bottom)
10 P12V_AUX1 2 x 4 Pin Power Connector (for CPU)
11 CPU0_FAN CPU Fan Connector
12 P12V_AUX2 2 x 4 Pin Power Connector (for Memory)
13 PMBUS PMBus Connector
14 BAT1 System Battery
15 SL_CN1 SlimLine 4i Connector #1 (SATA Signal)
16 SL_CN2 SlimLine 4i Connector #2 (SATA Signal)
17 SL_CN3 SlimLine 4i Connector #3 (SATA Signal)
18 SL_CN4 SlimLine 4i Connector #4 (SATA Signal)
19 ATX1 2 x 12 Pin System Power Connector
20 CASE_OPEN Case Open Intrusion Header
21 FP_1 Front Panel Header
22 BP_1 HDD Back Plane Board Connector
23 F_USB3 Front Panel USB 3.0 Connector
24 IPMB IPMB Connector
25 SYS_FAN5 System Fan Connector #5
26 SYS_FAN4 System Fan Connector #4
27 SYS_FAN3 System Fan Connector #3
28 SYS_FAN6 System Fan Connector #6
29 COM2 Serial Port Cable Connector #2
30 PCIE_1 PCIe x16 Slot #1
31 M2_0 M.2 Connector (PCIe Gen3 x4, NGFF-2280, M-Key)
32 PCIE_3 PCIe x16 Slot #3
33 PCIE_4 PCIe x8 Slot #4
34 PCIE_5 PCIe x16 Slot #5
35 PCIE_7 PCIe x16 Slot #7
36 LED_BMC BMC Firmware Readiness LED
37 COM1 Serial Port Cable Connector #1

- 8 -
Block Diagram

- 9 - Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can
become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read
the user's manual and follow these procedures:
• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
• Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
• When connecting hardware components to the internal connectors on the motherboard,
make sure they are connected tightly and securely.
• When handling the motherboard, avoid touching any metal leads or connectors.
• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic
components such as a motherboard, CPU or memory. If you do not have an ESD wrist
strap,keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.
• Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
• Before unplugging the power supply cable from the motherboard, make sure the power
supply has been turned off.
• Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
• Before using the product, please verify that all cables and power connectors of your
hardware components are connected.
• To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
• Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
• Do not place the computer system on an uneven surface .
• Do not place the computer system in a high-temperature environment.
• Turning on the computer power during the installation process can lead to damage to
system components as well as physical harm to the user.
• If you are uncertain about any installation steps or have a problem related to the use of the
product,pleaseconsultacertiedcomputertechnician.
Chapter 1 Hardware Installation

Hardware Installation - 10 -
1-2 Product Specications
CPU
AMD EPYC™ 7002 series processor family
Single processor, 7nm, Socket SP3
Up to 64-core, 128 threads per processor
TDP up to 225W (MZ01-CE0), TDP up to 200W (MZ01-CE1)
Compatible with AMD EPYC™ 7001 series processor family
Chipset System on Chip
Memory 8 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Memory speed: Up to 3200*/ 2933 MHz
*Follow BIOS setting and memory QVL list if running 3200 Mhz
Onboard
Graphics
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp
LAN 2 x 10Gb/s BASE-T LAN ports (Intel® X550-AT2)(Note)
2 x 1Gb/s LAN ports (Intel® I210-AT)
1 x 10/100/1000 management LAN
Expansion Slots Slot_7 (PCIe_7): 1 x PCIe x16 (Gen3 x16 bus)
Slot_5 (PCIe_5): 1 x PCIe x16 (Gen3 x16 bus)
Slot_4 (PCIe_4): 1 x PCIe x8 (Gen3 x8 bus)
Slot_3 (PCIe_3): 1 x PCIe x16 (Gen3 x16 bus)
Slot_1 (PCIe_1): 1 x PCIe x16 (Gen3 x16 bus)
1 x M.2 slot:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards
Storage Interface 4 x SlimSAS for 16 x SATA III 6Gb/s ports
(Note) MZ01-CE0 Only.

- 11 - Hardware Installation
Internal I/O
Connectors
1 x 24-pin ATX main power connector
2 x 8-pin ATX 12V power connectors
4 x SlimSAS connectors
1 x M.2 slot
1 x CPU fan header
6 x System fan headers
1 x USB 3.0 header
2 x COM headers
1 x TPM header
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1xClearCMOSjumper
1xBIOSrecoveryjumper
Rear I/O
Connectors
2 x USB 3.0
1 x VGA
4 x RJ45 (MZ01-CE0), 2 x RJ45 (MZ01-CE1)
1 x MLAN
1 x ID switch with LED
1 x Power switch with LED
TPM 1 x TPM header with LPC interface
Optional TPM2.0 kit: CTM000
Board
Management
Aspeed® AST2500 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
Form Factor ATX
305W x 244D (mm)
GIGABYTE reserves the right tomake any changes to the product specications and product-related
information without prior notice.

Hardware Installation - 12 -
1-3 Installing and Removing the CPU and Heat Sink
Follow these instructions to Install the CPU:
1. Loosen the three captive screws in sequential order (1g2g3) securing the CPU cover.
2. Flip open the CPU cover.
3. Remove the CPU cap with CPU from the CPU frame using the handle on the CPU cap.
4. Using the handle on the CPU cap insert the new CPU cap with CPU installed into the CPU frame.
Note: Ensure that the CPU is installed in the CPU cap in the correct orientation, with the gold triangle
on the CPU aligned to the top left corner of the CPU cap.
5 Flip the CPU frame with CPU installed into place in the CPU socket.
Read the following guidelines before you begin to install the CPU:
• Make sure that the motherboard supports the CPU.
• Always turn off the computer and unplug the power cord from the power outlet before installing
the CPU to prevent hardware damage.
• Unplug all cables from the power outlets.
• Disconnect all telecommunication cables from their ports.
• Placethesystemunitonaatandstablesurface.
• Open the system according to the instructions.
WARNING!
Failure to properly turn off the server before you start installing components may cause serious
damage. Do not attempt the procedures described in the following sections unless you are a
qualiedservicetechnician.
3
3
1
1
2
2
1
External cap
2
3
CPU
4
5
7
1
1
3
3
2
2
6
8
9
3
3
1
1
2
2
44
Note:
• When installing the heatsink to CPU, use T20-Lobe driver to tighten 4 captive nuts in sequence
as 1-4.
• The screw tightening torque: 16.1 ± 1.2 kgf-cm (14.0 ± 1.0 lbf-in).

- 13 - Hardware Installation
1-4 Installing and Removing Memory
Read the following guidelines before you begin to install the memory:
•Make sure that the motherboard supports the memory. It is recommended that memory of the
same capacity, brand, speed, and chips be used.
•Always turn off the computer and unplug the power cord from the power outlet before installing
the memory to prevent hardware damage.
•Memory modules have a foolproof design. A memory module can be installed in only one
direction. If you are unable to insert the memory, switch the direction.
1-4-1 8-Channel Memory Conguration
This motherboard provides 8 DDR4 memory sockets and supports 8-Channel Technology. After the memory
isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.EnablingFour
Channel memory mode will be four times of the original memory bandwidth.
21
21
CPU
DIMM_P0_G0
DIMM_P0_H0
DIMM_P0_E0
DIMM_P0_F0
DIMM_P0_B0
DIMM_P0_A0
DIMM_P0_D0
DIMM_P0_C0

Hardware Installation - 14 -
1-4-2 Installing and Removing a Memory Module
Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on to this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
1
2
2
DIMMs Populated
DIMM Frequency (MT/s)
1R 2R
2DR 1.2V
1
1 -- 3200
-- 1 3200
2
2 -- 2933
1 1 2933
-- 2 2933
1-4-3 DIMM Population Table
RDIMM Maximum Frequency Supported Table

- 15 - Hardware Installation
Note:
• 1R: 1 package rank of SDP DRAMs
• 2R: 2 package rank of SDP DRAMs
• 2DR: 2 package rank of DDP DRAMs
• 4DR: 4 package rank of DDP DRAMs
• 1S2R/1S4R/1S8R: 1 package rank of 2/4/8 high 3DS DRAMs
• 2S2R/2S4R/2S8R: 2 package rank of 2/4/8 high 3DS DRAMs
• DIMM must be populated in sequenal alphabec order, starng with bank A0.
LRDIMM Maximum Frequency Supported Table
3DS RDIMM Maximum Frequency Supported Table
DIMMs Populated
DIMM Frequency (MT/s)
2S2R
2S4R 4DR 1.2V
1
1 -- 3200
-- 1 3200
2
2 -- 2933
1 1 Not Supported
-- 2 2933
DIMMs Populated
DIMM Frequency (MT/s)
2S2R
2S4R 1.2V
1 1 2933
2 2 2666

Hardware Installation - 16 -
1-5 Installing and Removing the M.2 SSD Module
Follow the steps below to install an optional M.2 SSD module on your motherboard.
Step1. Insert the M.2 SSD module into the slot.
Step2. Secure it with the screw, tightening as necessary to fasten the M.2 SSD module in place.
2260
2242
2280
1
2

- 17 - Hardware Installation
10
1-6 Back Panel Connectors
uPower Button
Press the power button to turn on/off the system.
vID Button with LED
Whenthesystemidenticationisactive,theIDLEDonthefront/backpanelglowsblue.
wGbE LAN Port #3
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section
below for a description of the states of the LAN port LEDs.
xGbE LAN Port #4
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section
below for a description of the states of the LAN port LEDs.
y10/100/1000 Server Management LAN Port
The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is
the dedicated LAN port for Server Management.
zUSB 3.0 Port
The USB port supports the USB 3.0 specification. Use this port for USB devices such as a USB
keyboard/mouse,USBprinter,USBashdriveetc.
{10G LAN Port #2 (MZ01-CE0 Only)
The 10 Gigabit SPF+ LAN port provides Internet connection at up to 10 Gbps data rate. See the section
below for a description of the states of the SFP+ LAN port LEDs.
|10G LAN Port #1 (MZ01-CE0 Only)
The 10 Gigabit SPF+ LAN port provides Internet connection at up to 10 Gbps data rate. See the section
below for a description of the states of the SFP+ LAN port LEDs.
}VGA Port
The video-in port allows connection via video in, which can also apply to the video loop thru function.
v
w
x
y
{}
u|
z

Hardware Installation - 18 -
LAN Port
• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
ID Button/ LED:10/100/1000 LAN Speed LED:
State Description
Yellow On 1 Gbps data rate
Green On 100 Mbps data rate
Off 10 Mbps data rate
State Description
Blue On Systemidenticationisactive.
Off Systemidenticationisdisabled.
10G LAN Link and Speed LED
State Description
Yellow On 10 Gbps data rate
Green On 1 Gbps data rate
Off 100 Mbps data rate
10G LAN Port Active/Link LEDs
10/100/1000 LAN and ID Button LEDs
Link/Activity LED
Speed LED
LAN Port
Link/Activity LED
Speed LED

- 19 - Hardware Installation
1-7 Internal Connectors
Read the following guidelines before connecting external devices:
• First make sure your devices are compliant with the connectors you wish to connect.
• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
• After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.
1) ATX1 11) PMBUS
2) P12V_AUX1 (for CPU) 12) F_USB3
3) P12V_AUX2 (for Memory) 13) COM1
4) CPU0_FAN 14) COM2
5) SYS_FAN1 15) FP_1
6) SYS_FAN2 16) BP_1
7) SYS_FAN3 17) IPMB
8) SYS_FAN4 18) TPM_LPC
9) SYS_FAN5 19) BAT1
10) SYS_FAN6 20) LED_BMC
21
21
CPU
DIMM_P0_G0 DIMM_P0_H0 DIMM_P0_E0
DIMM_P0_F0
DIMM_P0_B0
DIMM_P0_A0
DIMM_P0_D0
DIMM_P0_C0
1
2
3 4
56
8
7
9
10
13
12
11
14
15
16
17
18
19
20

Hardware Installation - 20 -
21
21
CPU
DIMM_P0_G0
DIMM_P0_H0
DIMM_P0_E0
DIMM_P0_F0
DIMM_P0_B0
DIMM_P0_A0
DIMM_P0_D0
DIMM_P0_C0
1/2/3) ATX1/P12V_AUX1/P12V_AUX2
(2x12 Main Power Connector and 2x4 12V Power Connector)
With the use of the power connector, the power supply can supply enough stable power to all the components
onthemotherboard.Beforeconnectingthepowerconnector,rstmakesurethepowersupplyisturnedoff
and all devices are properly installed. The power connector possesses a foolproof design. Connect the power
supply cable to the power connector in the correct orientation. The 12V power connector mainly supplies
power to the CPU. If the 12V power connector is not connected, the computer will not start.
To meet expansion requirements, it is recommended that a power supply that can withstand high
power consumption be used (500W or greater). If a power supply is used that does not provide the
required power, the result can lead to an unstable or unbootable system.
5
8
1
4
PinNo. Denition
1 GND
2 GND
3 GND
4 GND
5 +12V
6 +12V
7 +12V
8 +12V
ATX1 P12V_AUX2
P12V_AUX1
ATX1
Pin No. Denition Pin No. Denition
1 3.3V 13 3.3V
2 3.3V 14 -12V
3 GND 15 GND
4 +5V 16 PS_ON
5 GND 17 GND
6 +5V 18 GND
7 GND 19 GND
8 Power Good 20 -5V
9 5VSB 21 +5V
10 +12V 22 +5V
11 +12V 23 +5V
12 3.3V 24 GND
1
13
12
24
4
1
8
5
P12V_AUX1/P12V_AUX2