Gigabyte MZ72-HB2 User manual

MZ72-HB2
AMD EPYC™ 7003 Dual Sockets Server Motherboard
User Manual
Rev. 3.0

Copyright
© 2022 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specifications and features in this manual may be made by GIGABYTE
without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or
published in any form or by any means without GIGABYTE's prior written permission.
Documentation Classications
In order to assist in the use of this product, GIGABYTE provides the following types of documentation:
 UserManual:detailedinformation&stepsabouttheinstallation,congurationandusethis
product (e.g. motherboard, server barebones), covering hardware and BIOS.

User Guide: detailed information about the installation & use of an add-on hardware or
  softwarecomponent(e.g.BMCrmware,rail-kit)compatiblewiththisproduct.
Quick Installation Guide: a short guide with visual diagrams that you can reference easily for
installation purposes of this product (e.g. motherboard, server barebones).
Please see the support section of the online product page to check the current availability of these
documents
For More Information
Forrelatedproductspecications,thelatestrmwareandsoftware,andotherinformation,pleasevisit
our website at: http://www.gigabyte.com.
For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our
reseller portal: http://reseller.b2b.gigabyte.com
For further technical assistance, please contact your GIGABYTE representative or visit
http://esupport.gigabyte.com/ to create a new support ticket.
For any general sales or marketing enquires, you may message GIGABYTE server directly by
email: server[email protected].

- 3 -
Table of Contents
MZ72-HB2 Motherboard Layout......................................................................................5
Block Diagram .................................................................................................................7
Chapter 1 Hardware Installation .....................................................................................8
1-1 Installation Precautions.................................................................................... 8
1-2 ProductSpecications...................................................................................... 9
1-3 Installing and Removing the CPU and Heat Sink........................................... 12
1-4 Installing and Removing Memory................................................................... 13
1-4-1 8-ChannelMemoryConguration..........................................................................13
1-4-2 Installing and Removing the Memory Module .......................................................14
1-4-3 Processor and Memory Module Matrix Table .........................................................14
1-4-4 Memory Population Table ......................................................................................15
1-5 Installing and Removing the M.2 SSD Module............................................... 16
1-6 Back Panel Connectors.................................................................................. 17
1-7 Internal Connectors........................................................................................ 18
1-8 Jumper Settings ............................................................................................. 27
Chapter 2 BIOS Setup ..................................................................................................28
2-1 The Main Menu .............................................................................................. 30
2-2 Advanced Menu ............................................................................................. 33
2-2-1 Trusted Computing .................................................................................................35
2-2-2 PSP Firmware Versions..........................................................................................36
2-2-3 Legacy Video Select...............................................................................................37
2-2-4 AST2600SuperIOConguration...........................................................................38
2-2-5 S5 RTC Wake Settings...........................................................................................40
2-2-6 Serial Port Console Redirection .............................................................................41
2-2-7 CPUConguration..................................................................................................45
2-2-8 PCI Subsystem Settings.........................................................................................46
2-2-9 USBConguration..................................................................................................48
2-2-10 NetworkStackConguration..................................................................................50
2-2-11 NVMeConguration ...............................................................................................51
2-2-12 SATAConguration.................................................................................................52
2-2-13 GraphicOutputConguration.................................................................................53
2-2-14 AMDMemCongurationStatus.............................................................................54
2-2-15 TlsAuthConguration ............................................................................................55
2-2-16 iSCSIConguration................................................................................................56
2-2-17 Broadcom BCM57416 10GBASE-T Network Connection......................................57
2-2-18 VLANConguration................................................................................................63

- 4 -
2-2-19 MACIPv4NetworkConguration...........................................................................64
2-2-20 MACIPv6NetworkConguration...........................................................................65
2-3 AMD CBS Menu............................................................................................. 66
2-3-1 CPU Common Options...........................................................................................67
2-3-2 DF Common Options..............................................................................................73
2-3-3 UMC Common Options ..........................................................................................78
2-3-4 NBIO Common Options..........................................................................................93
2-3-5 FCH Common Options ...........................................................................................99
2-3-6 SOC Miscellaneous Control .................................................................................103
2-3-7 Workload Tuning...................................................................................................104
2-4 AMD PBS Menu........................................................................................... 105
2-4-1 RAS ......................................................................................................................106
2-5 Chipset Setup Menu..................................................................................... 108
2-5-1 North Bridge .........................................................................................................109
2-5-2 Fabric Resource ...................................................................................................110
2-6 Server Management Menu............................................................................111
2-6-1 System Event Log ................................................................................................113
2-6-2 View FRU Information ..........................................................................................114
2-6-3 BMCNetworkConguration.................................................................................115
2-6-4 IPv6BMCNetworkConguration.........................................................................116
2-7 Security Menu .............................................................................................. 117
2-7-1 Secure Boot .........................................................................................................118
2-8 Boot Menu.................................................................................................... 120
2-9 Save & Exit Menu......................................................................................... 122
2-10 BIOS Recovery ............................................................................................ 123
2-11 BIOS POST Beep code (AMI standard)....................................................... 124
2-11-1 PEI Beep Codes...................................................................................................124
2-11-2 DXE Beep Codes .................................................................................................124

- 5 -
MZ72-HB2 Motherboard Layout
CPU0
CPU1
DIMM_P0_A0 DIMM_P0_B0 DIMM_P0_C0 DIMM_P0_D0 DIMM_P0_H0 DIMM_P0_G0 DIMM_P0_F0 DIMM_P0_E0
DIMM_P1_L0 DIMM_P1_K0 DIMM_P1_J0 DIMM_P1_I0 DIMM_P1_M0 DIMM_P1_N0 DIMM_P1_O0 DIMM_P1_P0
1 2 3 4 5 6
7
8
9
10
11
12
13
141517181920
22
21
23
24
25
26 27
28
31
29
32
33
41
42
34 35 36 37
38
39
40
30
16

- 6 -
Item Code Description
1 VGA VGA Port
2 SW_ID ID Button with LED
3 LAN1 10GbE LAN Port #1
4 LAN2 10GbE LAN Port #2
5 USB3_MLAN Server Management LAN Port (Top)/ USB3.0 Ports (Bottom)
6 COM1 Serial Port
7ATX 2 x 12 Pin Main Power Connector
8 PMBUS PMBus Connector
9 P12V_1 2 x 4 Pin 12V Power Connector (for CPU0)
10 P12V_2 2 x 4 Pin 12V Power Connector (for CPU1)
11 SLSAS_0 Slimline Connector #0 (SATAIII 6Gb/s Signal)
12 SLSAS_2 Slimline Connector #2 (SATAIII 6Gb/s Signal)
13 SLSAS_1 Slimline Connector #1 (SATAIII 6Gb/s Signal)
14 CPU1_FAN CPU Fan Connector (for CPU1)
15 CPU0_FAN CPU Fan Connector (for CPU0)
16 SATA_SGP SATA SGPIO Connector
17 SATA3 SATAIII 6Gb/s Connector #3
18 SATA2 SATAIII 6Gb/s Connector #2
19 SATA1 SATAIII 6Gb/s Connector #1
20 SATA0 SATAIII 6Gb/s Connector #0
21 SYS_FAN2 System Fan Connector #2
22 BAT Battery Socket
23 SYS_FAN1 System Fan Connector #1
24 F_USB3 Front Panel USB 3.0 Connector
25 F_USB2 USB 2.0 Header
26 FP_1 Front Panel Header
27 IPMB IPMB Connector
28 CN_NCSI NCSI Connector
29 BP_1 HDD Back Plane Board Connector
30 CASE_OPEN Case Open Intrusion Alert Header
31 LED_BMC BMC Firmware Readiness LED
32 M2_0 M.2 slot (PCIe Gen4 x4, Support NGFF-2280/22110)
33 SPI_TPM TPM Module Connector
34 PCIE_1 PCIe x16 Slot #1 (Gen4 x8)
35 PCIE_2 PCIe x16 Slot #2 (Gen4 x8)
36 PCIE_3 PCIe x16 Slot #3 (Gen4 x16)
37 PCIE_4 PCIe x16 Slot #4 (Gen4 x16)
38 NVME_0 Slimline SAS 4i Connector (NVMe/PCIe Gen4 x4)
39 NVME_1 Slimline SAS 4i Connector (NVMe/PCIe Gen4 x4)
40 PCIE_6 PCIe x16 Slot #6 (Gen4 x16)
41 SYS_FAN4 System Fan Connector #4
42 SYS_FAN3 System Fan Connector #3

- 7 -
Block Diagram

- 8 -
Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can
become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read
the user's manual and follow these procedures:
• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
• Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
• When connecting hardware components to the internal connectors on the motherboard,
make sure they are connected tightly and securely.
• When handling the motherboard, avoid touching any metal leads or connectors.
• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic
components such as a motherboard, CPU or memory. If you do not have an ESD wrist
strap,keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.
• Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
• Before unplugging the power supply cable from the motherboard, make sure the power
supply has been turned off.
• Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
• Before using the product, please verify that all cables and power connectors of your
hardware components are connected.
• To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
• Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
• Do not place the computer system on an uneven surface .
• Do not place the computer system in a high-temperature environment.
• Turning on the computer power during the installation process can lead to damage to
system components as well as physical harm to the user.
• If you are uncertain about any installation steps or have a problem related to the use of the
product,pleaseconsultacertiedcomputertechnician.
Chapter 1 Hardware Installation

- 9 -
Hardware Installation
1-2 Product Specications
Socket
Socket
Security
Security
Form Factor E-ATX
305W x 330D (mm)
Socket
Socket
Security
Security
CPU AMD EPYC™ 7003 series processor family
Dual processors, 7nm, Socket SP3
Up to 64-core, 128 threads per processor
cTDP up to 280W
Compatible with AMD EPYC™ 7002 series processor family
Socket
Socket
Security
Security
Chipset System on Chip
Socket
Socket
Security
Security
Memory 16 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 128GB supported
LRDIMM modules up to 128GB supported
3DS RDIMM/LRDIMM modules up to 256GB supported
Memory speed: Up to 3200/ 2933 MHz
Socket
Socket
Security
Security
LAN 2 x 10GbE LAN ports (1 x Broadcom® BCM57416)
1 x 10/100/1000 management LAN
Socket
Socket
Security
Security
Onboard
Graphics
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM
Socket
Socket
Security
Security
Storage Interface 4 x 7-pin SATA 6Gb/s ports
*3 x SlimSAS (with 12 x SATA 6Gb/s or 3 x NVMe PCIe Gen4 x4) ports
1 x M.2 slot:
- M-key
- PCIe Gen4 x4
- Supports NGFF-2280/22110 cards
2 x NVMe ports:
- SlimSAS 4i type
- PCIe Gen4 x4 per port
*Note!
Default setting is SATA, please go to BIOS Setup section, Advances>PCI Sub-
system setting for advanced conguration manually.
Socket
Socket
Security
Security
Expansion Slots Slot_6: 1 x PCIe x16 (Gen4 x16 bus) slot ( from CPU_0)
Slot_4: 1 x PCIe x16 (Gen4 x16 bus) slot ( from CPU_0)
Slot_3: 1 x PCIe x16 (Gen4 x16 bus) slot ( from CPU_1)
Slot_2: 1 x PCIe x16 (Gen4 x8 bus) slot ( from CPU_0)
Slot_1: 1 x PCIe x16 (Gen4 x8 bus) slot ( from CPU_1)
NOTE:
We reserve the right to make any changes to the product specications and product-related
information without prior notice.

- 10 -
Hardware Installation
Socket
Socket
Security
Security
Internal I/O
Connectors
1 x 24-pin ATX main power connector
2 x 8-pin ATX 12V power connectors
5 x SlimSAS connectors
4 x SATA 7-pin connects
1 x M.2 slot
2 x CPU fan headers
4 x System fan headers
1 x USB 3.0 header
1 x USB 2.0 header
1 x TPM header
1 x Front panel header
1 x PMBus connector
1 x IPMB connector
1xClearCMOSjumper
1xBIOSrecoveryjumper
Socket
Socket
Security
Security
Rear I/O
Connectors
2 x USB 3.0 ports
1 x VGA port
1 x Serial port
2 x RJ45 ports
1 x MLAN port
1 x ID button with LED
Socket
Socket
Security
Security
TPM 1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010
Socket
Socket
Security
Security
Board
Management
Aspeed® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
Dashboard
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
FanProle
System Firewall
Power Consumption
Power Control
LDAP / AD / RADIUS Support
Backup&RestoreConguration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings

- 11 -
Hardware Installation
Socket
Socket
Security
Security
Operating
Properties
Operating temperature: 10°C to 40°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

- 12 -
Hardware Installation
1-3 Installing and Removing the CPU and Heat Sink
Follow these instructions to Install the CPU:
1. Loosen the three captive screws in sequential order (1g2g3) securing the CPU cover.
2. Flip open the CPU cover.
3. Remove the CPU cap with CPU from the CPU frame using the handle on the CPU cap.
4. Using the handle on the CPU cap insert the new CPU cap with CPU installed into the CPU frame.
Note: Ensure that the CPU is installed in the CPU cap in the correct orientation, with the gold triangle
on the CPU aligned to the top left corner of the CPU cap.
5 Flip the CPU frame with CPU installed into place in the CPU socket.
Read the following guidelines before you begin to install the CPU:
• Make sure that the motherboard supports the CPU.
• Always turn off the computer and unplug the power cord from the power outlet before installing
the CPU to prevent hardware damage.
• Unplug all cables from the power outlets.
• Disconnect all telecommunication cables from their ports.
• Placethesystemunitonaatandstablesurface.
• Open the system according to the instructions.
WARNING!
Failure to properly turn off the server before you start installing components may cause serious
damage. Do not attempt the procedures described in the following sections unless you are a
qualiedservicetechnician.
3
3
1
1
2
2
1
External cap
2
3
CPU
4
5
7
1
1
3
3
2
2
6
8
9
3
3
1
1
2
2
44
Note:
• Lock the CPU by using a T20-Lobe driver to tighten 3 captive nuts in sequence as 1-3.
• The screw tightening torque: 16.1 ± 1.2 kgf-cm

- 13 -
Hardware Installation
1-4 Installing and Removing Memory
Read the following guidelines before you begin to install the memory:
•Make sure that the motherboard supports the memory. It is recommended that memory of the
same capacity, brand, speed, and chips be used.
•Always turn off the computer and unplug the power cord from the power outlet before installing
the memory to prevent hardware damage.
•Memory modules have a foolproof design. A memory module can be installed in only one
direction. If you are unable to insert the memory, switch the direction.
1-4-1 8-Channel Memory Conguration
This motherboard provides 16 DDR4 memory slots and supports 8-Channel Technology. After the memory
isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.
CPU0
CPU1
DIMM_P0_A0 DIMM_P0_B0 DIMM_P0_C0 DIMM_P0_D0 DIMM_P0_H0 DIMM_P0_G0 DIMM_P0_F0 DIMM_P0_E0
DIMM_P1_L0 DIMM_P1_K0 DIMM_P1_J0 DIMM_P1_I0 DIMM_P1_M0 DIMM_P1_N0 DIMM_P1_O0 DIMM_P1_P0

- 14 -
Hardware Installation
1-4-2 Installing and Removing the Memory Module
Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on to this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
1
2
2
1-4-3 Processor and Memory Module Matrix Table
Processor and Memory Module Matrix Table
8 DIMMs
CPU#
CPU0 A1 B1 C1 D1 E1 F1 G1 H1
16 DIMMs
CPU0 A1A0 B1B0 C1C0 D1D0 E1E0 F1F0 G1G0 H1H0
16 DIMMs
CPU0 A1 B1 C1 D1 E1 F1 G1 H1
CPU1 I1 J1 K1 L1 M1 N1 O1 P1
32 DIMMs
CPU0 A1 B1 C1 D1 E1 F1 G1 H1A0 B0 C0 D0 E0 F0 G0 H0
CPU1 I1 J1 K1 L1 M1 N1 O1 P1I0 J0 K0 L0 M0 N0 O0 P0
Channel A/I Channel B/J Channel C/K Channel D/L Channel E/M Channel F/N Channel G/O Channel H/P

- 15 -
Hardware Installation
Note:
• When only one DIMM is used, it must be populated in memory slot DIMM1.
EPYC Memory Speed based on DIMM Population (Two DIMM per Channel)
DIMM
Type
DIMM Population Max EPYC 7003
DDR Frequency (MHz)
DIMM 0 DIMM 1
RDIMM
-- 1R 3200
1R 1R 2933
-- 2R or 2DR 3200
1R 2R or 2DR 2933
2R or 2DR 2R or 2DR 2933
LRDIMM
-- 4DR 3200
4DR 4DR 2933
-- 2S2R (4 Ranks) 3200
-- 2S4R (8 Ranks) 3200
2S2R (4 Ranks) 2S2R (4 Ranks) 2933
2S4R (8 Ranks) 2S4R (8 Ranks) 2933
3DS
-- 2S2R (4 Ranks) 2933
2S2R (4 Ranks) 2S2R (4 Ranks) 2666
-- 2S4R (8 Ranks) 2933
2S4R (8 Ranks) 2S4R (8 Ranks) 2666
DIMM
Type
DIMM Population Max EPYC 7003
DDR Frequency (MHz)
DIMM 0
RDIMM
1R (1 Rank) 3200
2R or 2DR (2 Ranks) 3200
LRDIMM
4DR (4 Ranks) 3200
2S2R (4 Ranks) 3200
2S4R (8 Ranks) 3200
3DS
2S2R (4 Ranks) 3200
2S4R (8 Ranks) 3200
EPYC Memory Speed based on DIMM Population (One DIMM per Channel)
1-4-4 Memory Population Table

- 16 -
Hardware Installation
1-5 Installing and Removing the M.2 SSD Module
Follow the steps below to install an optional M.2 SSD module on your motherboard.
Step1. Insert the M.2 SSD module into the slot.
Step2. Secure it with the screw, tightening as necessary to fasten the M.2 SSD module in place.
1
2

- 17 -
Hardware Installation
1-6 Back Panel Connectors
uSerial Port
Connects to serial-based mouse or data processing devices.
v10/100/1000 Server Management LAN Port
The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is
the dedicated LAN port for Server Management.
wUSB 3.0 Ports
The USB port supports the USB 3.0 specification. Use this port for USB devices such as a USB
keyboard/mouse,USBprinter,USBashdriveetc.
x10GBASE-T RJ-45 LAN Port #2
The 10 Gigabit Ethernet LAN port provides Internet connection at up to 10 Gbps data rate. See the
section below for a description of the states of the LAN port LEDs.
y10GBASE-T RJ-45 LAN Port #1
The 10 Gigabit Ethernet LAN port provides Internet connection at up to 10 Gbps data rate. See the
section below for a description of the states of the LAN port LEDs.
zID button with LED
Whenthesystemidenticationisactive,theIDLEDonthefront/backpanelglowsblue.
{VGA Port
Connects to a monitor device.
v
x y z
{
u
LAN and ID Button LEDs
Link/Activity LED
Speed LED
LAN Port
• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
ID button/LED:
10/100/1000 LAN LED:
State Description
Yellow On 1Gbps data rate
Green On 100Mbps data rate
Off 10Mbps data rate
State Description
Blue On Systemidenticationisactive
Off Systemidenticationisdisabled
10GbE LAN LED:
State Description
Yellow On 5Gbps, 2.5Gbps, 1Gps data rate
Green On 10Gbps data rate
Off 100Mbps data rate
w

- 18 -
Hardware Installation
1-7 Internal Connectors
Read the following guidelines before connecting external devices:
• First make sure your devices are compliant with the connectors you wish to connect.
• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
• After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.
1) ATX 11) F_USB2
2) P12V_1 (for CPU0) 12) FP_1
3) P12V_2 (for CPU1) 13) BP_1
4) SATA0/SATA1/SATA2/SATA3 14) SPI_TPM
5) SATA_SGP 15) IPMB
6) CPU0_FAN/ CPU1_FAN 16) CN_NSCI
7) SYS_FAN1/SYS_FAN2 17) LED_BMC
8) SYS_FAN3/SYS_FAN4 18) BAT
9) PMBUS 19) CASE_OPEN
10) F_USB3 -- --
CPU0
CPU1
DIMM_P0_A0 DIMM_P0_B0 DIMM_P0_C0 DIMM_P0_D0 DIMM_P0_H0 DIMM_P0_G0 DIMM_P0_F0 DIMM_P0_E0
DIMM_P1_L0 DIMM_P1_K0 DIMM_P1_J0 DIMM_P1_I0 DIMM_P1_M0 DIMM_P1_N0 DIMM_P1_O0 DIMM_P1_P0
7
15
17
18
16
1
2
3
6
8
9
10
11
12
13
14
4 5
19

- 19 -
Hardware Installation
1/2/3) ATX/P12V_1/P12V_2 (2x12 Main Power Connector and 2x4 12V Power Connector)
With the use of the power connector, the power supply can supply enough stable power to all the components
onthemotherboard.Beforeconnectingthepowerconnector,rstmakesurethepowersupplyisturnedoff
and all devices are properly installed. The power connector possesses a foolproof design. Connect the power
supply cable to the power connector in the correct orientation. The 12V power connector mainly supplies
power to the CPU. If the 12V power connector is not connected, the computer will not start.
To meet expansion requirements, it is recommended that a power supply that can withstand high
power consumption be used (500W or greater). If a power supply is used that does not provide the
required power, the result can lead to an unstable or unbootable system.
ATX
P12V_1/ P12V_2
85
41
PinNo. Denition
1 GND
2 GND
3 GND
4 GND
5 +12V
6 +12V
7 +12V
8 +12V
113
1224
Pin No. Denition Pin No. Denition
1 3.3V 13 3.3V
2 3.3V 14 -12V
3 GND 15 GND
4 +5V 16 PS_ON
5 GND 17 GND
6 +5V 18 GND
7 GND 19 GND
8 Power Good 20 -5V
9 5VSB 21 +5V
10 +12V 22 +5V
11 +12V 23 +5V
12 3.3V 24 GND

- 20 -
Hardware Installation
4) SATA0/SATA1/SATA2/SATA3 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s standard. Each
SATA connector supports a single SATA device.
PinNo. Denition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
1
7
5) SATA_SGP (SATA SGPIO) Connector
Serial General Purpose Input/Output (SGPIO) is a communication method used between a host bus adapter
(HBA) and a main board.
PinNo. Denition
1 Data Out
2 GND
3 Data In
4 Load
5 Clock
1
5