Gigabyte R151-Z30 User manual

Motherboard Components
No. Descripon
1 ID buon with LED
2 USB 2.0 ports
3 Server management LAN port (top)/USB 3.0 port (boom)
4 SFP+ LAN port #1 acve/link LEDs
5 SFP+ LAN port #1/SFP+ LAN port#2
6 SFP+ LAN port #2 acve/link LEDs
7 Serial port (top) / VGA port (boom)
8 PMBus connector
9 BMC firmware readiness LED
10 TPM connector
11 2 x 12 pin main power connector
12 2 x 4 pin power connector (for memory)
13 2 x 4 pin power connector (for CPU)
14 Slimline connector #0 (SATA 6Gb/s signal)
15 Slimline connector #1 (SATA 6Gb/s signal)
16 Slimline connector #2 (SATA 6Gb/s signal)
17 Slimline connector #3 (SATA 6Gb/s signal)
18 Front panel header
19 HDD back plane board header
20 M.2 slot (Gen3/x4)
21 USB 3.0 header
22 USB 2.0 header
23 Serial port cable connector
24 PCIe x16 slot (Gen3/x16)
25 PCIe x8 slot (Gen3/x8)
26 PCIe x16 slot (Gen3/x16)
27 PCIe x16 slot (Gen3/x16)
28 PCIe x16 slot (Gen3/x8)
29 PCIe x16 slot (Gen3/x16)
30 PCIe x8 slot (Gen3/x8)
31 Baery socket
32 IPMB connector
DIMM_P0_D0 DIMM_P0_D1
DIMM_P0_A0 DIMM_P0_A1
DIMM_P0_B0 DIMM_P0_B1
DIMM_P0_C0 DIMM_P0_C1
DIMM_P0_E1 DIMM_P0_E0
CPU
DIMM_P0_H1 DIMM_P0_H0
DIMM_P0_G1 DIMM_P0_G0
DIMM_P0_F1 DIMM_P0_F0
1 2 3 4 5 6 7
8
9
11
12
13
10
15
14
17
18
19
20
21
22
23
24 25 26 27 28 29 30
31
32
16
BIOS Recovery
BIOS_RCVR
PMBUS Addr
PMBUS_SEL
Chipset
BMC
1
2
3
Clear CMOS
CLR_CMOS
Default
Enable
1
2
3
S3 Power On Select
S3_MASK
EnableDefault
123
Enable Default
123
Password Clear
BIOS_PWD
Enable Default
123
No. Descripon
1 PCI Express card bays
2 Power supply unit
3 DDR4 Memory
4 CPU/Heatsink
5 System fan #1
6 System fan #2
7 System fan #3
8 System fan #4
9 System fan #5
10 Hard Disk Drives
System Components
M2.6
1
2
3
34
567
10
89
CPU/Heat Sink
External cap
2
3
CPU
4
5
2
3
1
4
8
9
6
3
1
2
1
1
3
2
7
Memory
LRDIMM Maximum Frequency Supported Table
RDIMM Maximum Frequency Supported Table
DDR Populaon Table
NOTE!
 1R: 1 package rank of SDP DRAMs
 2R: 2 package rank of SDP DRAMs
 2DR: 2 package rank of DDP DRAMs
 4DR: 2 package rank of DDP DRAMs
 1S2R/1S4R/1S8R: 1 package rank of 2/4/8 high 3DS DRAMs
 2S2R/2S4R/2S8R: 2 package rank of 2/4/8 high 3DS DRAMs
 DIMM must be populated in sequenal alphabec order, starng with bank A.
 When only one DIMM is used, it must be populated in memory slot A1.
DIMMs
Populated DIMM0 DIMM1
-- 11
1 12
DIMMs
Populated
DIMM
1R
2
1-- --
2 --
1
--
--
-- --
-- Not Supported
2667
2667
Not Supported
Not Supported
2133
1
1
--
--2
1
1
--
-- --
--
--
2133
Not Supported
2133
1
11
1
2
4DR 1.2V 2S4R
Frequency (MT/s)
DIMM
DIMMs
Populated 1R
-- --
--
2 --
--
-- --
--
--
--
--
2667
2400
Not Supported
2133
2133
2133
1
1
2
1
1
1
-- --
--
--
Not Supported
Not Supported
Not Supported
1
11
1
2
4DR 1.2V
2R
2DR
2S2R
2S4R
Frequency (MT/s)
2
1
1
Fan Duct
System Fan
1
2
PCI Express Card
3
2
1
46
5
Solid State Drive
2260
2240
2280
2
1
System Cover
Power Supply
1
1
2
3
Power Supply Status LED
1
2State Description
No AC power to all power supplies
No AC power to all power supplies
Blink/Green
0.5Hz Blink
Red /Green
Off
0.5Hz Blink/Red
Green Power supply DC output ON and ready
Green Power supply failure
Only standby output on
Power supply warning
No. Descripon
1 USB 3.0 ports
2 ID Buon with LED
3 Power Buon with LED
No. Descripon
1 Secondary Power Supply Module
2 Primary Power Supply Module
3 Serial Port
4 VGA Port
5 GbE LAN Port
6 Server Management LAN Port
7 USB 3.0 Ports
8 USB 2.0 Ports
9 ID Buon with LED
System Appearance
1 2 3 4 5 6 7 8 9
HDD #0 HDD #1 HDD #2 HDD #3
1 2 3
Rear
Front
System is operating normally.
System
Status LED
Green
Amber
Solid On
Critical condition, may indicates:
System fan failure
System temperature
Solid On
Non-critical condition, may indicates:
Redundant power module failure
Temperature and voltage issue
Chassis intrusion
Blink
System is not ready, may indicates:
POST error
NMI error
Processor or terminator missing
N/A Off
No. Name Color Status Description
1
7
8
5
6
3/4
NMI Button
2Reset Button
Press the button to enable NMI function.
Press the button to reset the system.
Press the button to activate system identifcation.
System is powered on.
System is in ACPI S1 state (sleep mode).
HDD locate
HDD access
HDD fault
HDD rebuilding
No HDD access or no HDD fault.
Link between system and network or no access.
Data transmission or receiving is occurring.
No data transmission or receiving is occurring.
System is not powered on or in ACPI S5 state.
(power off).
System is in ACPI S4 state (hibernate mode).
ID Button
Power Button
with LED
Green
Green
Green
Amber
Green/
Amber
Solid On
Solid On
On
Off
Off
Off
Blink
Blink
Blink
On
Blink
N/A
N/A
Green
Green
N/A
HDD Status LED
LAN1/2
Active/Link LEDs
LED1
(*1) Depend on HBA/Ulity Spec.
(*2) Blink cycle depend on HDD’s acvity signal.
(*3) If HDD is pulled out during rebuilding, Disk status of this HDD is regarded as fault.
NOTE! Blinking frequency : (0.5sec on/ 0.5 sec off)
LED2
Hard Disk Drive
Hard Disk Drive LED
1
2
4
3
LED1 Locate Rebuilding
HDD
Fault
HDD
Access
HDD Present
(No Access)
Disk LED
(LED on
Back Panel)
Amber
Removed HDD Slot
(LED on Back Panel)
Disk LED
Removed HDD Slot
RAID SKU
No RAID configuration
(via HBA, ICH)
RAID configuration
(via HW RAID Card or
SW RAID Card)
Green ON(*1) OFF Green OFF
ON
OFF
ON(*1)
OFF
OFF
ON
OFF
ON
Alternately
(Low Speed: 2 Hz)
(*3)
(*3)
OFF
OFF
--
--
Green
Amber
Green
ON(*1) OFF Green --Green
OFF OFF Amber --
Amber
Amber OFF OFF Amber OFF
2468 1357
Front Panel LED and Buons
R151-Z30 Hardware Quick Installaon Guide

Regulatory Noces
WEEE Symbol Statement
For more informaon, visit our website at:
hp://b2b.gigabyte.com
You are a professional?
Get access to our complete source of sales
& markeng materials at:
hp://reseller.b2b.gigabyte.com
hps://www.facebook.com/gigabyteserver
The symbol shown below is on the product or on its packaging, which indicates
that this product must not be disposed of with other waste. Instead, the device
should be taken to the waste collecon centers for acvaon of the treatment,
collecon, recycling and disposal procedure. The separate collecon and
recycling of your waste equipment at the me of disposal will help to conserve
natural resources and ensure that it is recycled in a manner that protects
human health and the environment.
For more informaon about where you can drop off your waste equipment for
recycling, please contact your local government office, your household waste
disposal service or where you purchased the product for details of environmen-
tally safe recycling.
 When your electrical or electronic equipment is no longer useful to you,
"take it back" to your local or regional waste collecon administraon for
recycling.
 If you need further assistance in recycling, reusing in your "end of life"
product, you may contact us at the Customer Care number listed in your
product's user's manual and we will be glad to help you with your effort.
GIGABYTE产品未故意添加和使用有害物质（Cd、Pb、Hg、Cr+6、PBDE和PBB）。所有部
件和元件均经过严格挑选，符合RoHS要求。此外，我们GIGABYTE一直致力于开发不使用
国际上禁止的有毒化学品的产品。
GIGABYTE products have not intended to add and safe from hazardous substances
(Cd, Pb, Hg, Cr+6, PBDE and PBB). The parts and components have been carefully selected to
meet RoHS requirement. Moreover, we at GIGABYTE are connuing our efforts to develop
products that do not use internaonally banned toxic chemicals.
Restricon of Hazardous Substances (RoHS)
Direcve Statement
限制使用有害物质 (RoHS) 指令声明
California Proposion 65 Warning
WARNING:
This product contains a chemicals , including lead, known to the State of California to cause
cancer and birth defects or other reproducve harm.
For more informaon, please visit: hp://www.p65warnings.ca.gov/
Baery Warning:
Incorrectly installing a baery or using incompable baery may increase the risk
of ifre explosion. Replace the baery only with the same or equivalent type.
 Do not disassemble, crush, punchture baeries.
 Do not store or place your baery pack next to or in a heat source such as a
fire, heatgenerang appliance, can or exhaust vent. Heang baery
cells to temperatures above 65oC (149oF) can cause explosion or fire.
 Do not aempt to open or service baeries. Do not dispose of baeries in a
fire or with household waste.
电池警告：
电池安装不当或使用不兼容的电池会增加火灾爆炸风险。更换电池时，只可
使用相同或同等类型的电池。
 请勿拆解、挤压、刺破电池。
 请勿将电池存放或放置在热源中或旁边，如火源、产生热的设备、罐体或
排气口。电池温度升至65oC (149oF)以上
可能导致爆炸或火灾。
 请勿尝试打开或维修电池。电池废弃时，请勿投入火中或者作为家庭废弃
物进行处理。
依照中华人民共和国的有毒有害物质的限制要求(China RoHS)提供以下的表格：
中华人民共和国电子信息产品中有毒有害物质
或元素的名称及含量标识格式
Connect With Us
Power Supply
Reliable Earthing:
Hazardous FAN
Hazardous Energy
This server is intended for installaon only in restricted access locaons where .
• Access can only be gained by SERVICE PERSONS who have been instructed about the reasons
for the restricons applied to the locaon and about any precauons that shall be taken.
• Access is through the use of a TOOL or lock and key, or other means of security, and is
controlled by the authority responsible for the locaon.
The following or similar rack-mount instrucons are included with the installaon instrucons:
A) Elevated Operang Ambient - If installed in a closed or mul-unit rack assembly, the
operang ambient temperature of the rack environment may be greater than room ambient.
Therefore, consideraon should be given to installing the equipment in an environment
compable with the maximum ambient temperature (Tma) specified by the manufacturer.
B) Reduced Air Flow - Installaon of the equipment in a rack should be such that the amount of
air flow required for safe operaon of the equipment is not compromised.
C) Mechanical Loading - Mounng of the equipment in the rack should be such that a hazardous
condion is not achieved due to uneven mechanical loading.
D) Circuit Overloading - Consideraon should be given to the connecon of the equipment to
the supply circuit and the effect that overloading of the circuits might have on overcurrent
protecon and supply wiring. Appropriate consideraon of equipment nameplate rangs should
be used when addressing this concern.
E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained.
Parcular aenon should be given to supply connecons other than direct connecons to the
branch circuit (e.g. use of power strips)."
Disconnect 2 power supply cords before servicing
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operaon.
FCC Statement
This equipment should not be operated above an ambient operaon temperature of 35 degrees
cengrade.
Ambient Operaon
CAUTION: The power supplies in your system may produce high voltages and energyhazards,
which can cause bodily harms. Unless you are instructed otherwise, only trained service
technicians are authorized to remove the covers and access any of the components inside the
system.
CAUTION: Do not connect of disconnect any cables or perform installaon, maintenance, or
reconfiguraon of this server during an electrical storm
CAUTION: Connect all power cords to a properly wired and grounded electrical outlet.
CAUTION: This server contains hazardous moving fan blades, keep fingers and other bodyparts
away.
Disconnect all power supply cords before servicing. Connect power supply cord only aer all the
covers are properly installed.
CAUTION: This server contains hazardous energy over 240VA on the backplane. To
prevent accidental short circuit, always insert the HDD trays aer servicing.
CAUTION: Slider/rail mounted equipment is
not to be used as a shelf or a work space.
CAUTION: Whenever you need to li the system, get
others to assist you.
To avoid injury, do not aempt to li the system by
yourself.
Restricted Access Locaon
The system may have more than one power supply cable. To reduce the risk of
electrical shock, a trained service technician may need to disconnect
all power supply cables before servicing the system.
Rack Mount Instrucons
CAN ICES-3 (A)/NMB-3(A)