Gigaset C610ip User manual

Quick
Start Guide

Quick
Start Guide
Box contents
1. Gigaset C610 IP-base
2. A power adapter for connecting the base station
to the power supply
3. A telephone cable for connecting the base to the
telephone network with an RJ11 port. Do not use this
cable – it is not needed in the Telio setup
4. An Ethernet cable to connect the base to a router
with an RJ45 port
5. A Gigaset C610H-handset
6. Two batteries for the handset
7. A battery cover for the handset
8. A belt clip for the handset
9. A charger for the handset
10. A power adapter to connect the handset charger to
the power supply
11. A quick guide and CD
1. 2. 3. 4.
5. 6. 7. 8.
9. 10. 11.

1. Ethernet cable (RJ45)
2. Power cable
1.
2.
(Do not use
the RJ11 port)
Gigaset C610 IP base contacts

1. Connect the network cable (the thickest of the two
provided cables) to the LAN-port on the side of the base.
2. Connect the other end of the network cable to a free
LAN-port on your router/modem.
3. Connect the power cable to the port on the back of the
base and plug it in a power socket.
4. When the base is connected to the router and the power
supply, the connection button on the front of the
base will light up blue.
5. Insert the batteries provided in the Gigaset handset.
6. Connect the power cable for the handset to the charger
and connect the charger to a power socket.
7. Place the handset in the charger.
Setup instructions
1.
2.
3.
5.
6.
7.

Connecting additional handsets
2. Use the navigation buttons around the
menu button and go to Settings >
Registration > Register Handset. Press
OK to conrm each menu choice. The
handset will now search for the base.
1. Press the menu button (the big black
button with a white line)

4. Enter 0000 followed by OK. After a short
time a green tick will be displayed
alongside the message “Handset
registered”. The telephone is now ready
for use.
If you wish to connect a dierent handset,
please see the instructions for the handset
you want to connect.
You can nd information on which Gigaset
products are compatible with the Gigaset
C610 IP-base at Gigasets homepage at
www.gigaset.com under “Support”.
3. Press the register button on the
front of the base until the
message “Please enter system
PIN” is displayed on the Gigaset
C610H handset.

What to do if it does not work?
When you have completed connection, it may take up to ten
minutes before your telephone is ready for use. The Gigaset
C610 IP-base will display a blue light when the phone is ready.
Check that all cables are correctly connected.
Check your Internet connection.
Ensure that the light on the Gigaset C610 IP base is blue.
Still facing problems?
Search telio.ch or contact our customer service.
Customer service: 0800 88 66 88
[email protected]
www.telio.ch

Teliophone is a smart phone app that allows you to use
voice over IP technology to make calls on your mobile
phone. No matter where in the world you are, when you
make a call using Teliophone with your Telio subscription
and phone number, the cost of your call will be as if you had
made it from home.
Read more on telio.no, or download the app from
the Apple App Store or Google Play.
Teliophone