GinSan Doghouse GS-400 User manual

Owner’s Manual
Pet Wash System
0052450 Rv 082018
© 2018 - GinSan Industries - Grand Rapids, MI USA
www.GinSan.com
800.446.7267
ClubPet
ALL INCLUSIVE SPA EXPERIENCE FOR THE FOUR-LEGGED
© 2010 GinSan Industries

©2018 - GinSan Industries
PET WASH
SYSTEM
Table of Contents
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Dimensions - Corner Spa (Standard) . . . . . . . . . . . . . . . . . . . . . . . 3
Dimensions - Corner Spa (In-Bay) . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wiring Diagram w/GS-400 (Prior to 1/2018). . . . . . . . . . . . . . . . . . 5
Wiring Diagram w/GS-401 (Prior to 1/2018). . . . . . . . . . . . . . . . . . 6
Wiring Diagram w/GS-400 (After 1/2018) . . . . . . . . . . . . . . . . . . . . 7
Wiring Diagram w/GS-401 (After 1/2018) . . . . . . . . . . . . . . . . . . . . 8
Wiring Diagram w/GS-60 with GS-400II, Coin Accptor & CryptoPay NG........ 9
Wiring Diagram w/GS-60 with LED6, Coin Acceptor & CryptoPay NG .......... 10
Wiring Diagram w/GS-60 with LED7 & CryptoPay NG ................... 11
Wiring Diagram w/GS-610 with LED6 & CryptoPay NG using aux. coin input ...... 12
Wiring Diagram w/GS-160 with LED7, Coin, Bill Accptor & CryptoPay NG ........ 13
Wiring Diagram Ultimate Rotary 10 Position with LED6 & CryptoPay NG .... 14
Wiring Diagram Ultimate Rotary 8 Position with LED7 & CryptoPay NG ..... 15
Plumbing Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Installation Instructions - Corner Spa. . . . . . . . . . . . . . . . . . . . 17-22
Installation Instructions - High Flow Rinse. . . . . . . . . . . . . . . . 23-24

Page 1
©2018 - GinSan Industries
PET WASH
SYSTEM
Limited Warranty
GinSan Industries provides a limited one year warranty on components and piece of equipment produced by the
Company to be free from defects in material and workmanship. Electrical assemblies see Appendix A, have a limited
two year warranty on the controller to be free from defects in material and workmanship. This limited warranty
does not cover equipment that has been damaged due to misuse, misapplication, modification, altered, neglected,
attempted theft, vandalism, connection to improper voltage supply, modification, or such parts that are commonly
recognized to be subject to wear in normal usage. Normal use products are, but not limited to, those listed on
Appendix B; which are warranted for 90 days. Every component and piece of equipment is packaged to assist in safe
handling of the product.
Claims must be submitted in writing within the appropriate coverage period as covered by this warranty, from date of
shipment, to the Company’s warranty/repair department. If the return is approved an RMA and labeling instructions
will be issued and the product can be returned. Returned product without the appropriate RMA and label will be
issued to scrap and all warranties/replacements will be considered null and void. If the product receiving the RMA is
not returned within 20 days from date of issuing the RMA then any credit toward the product will be reduced by 25%. If
the product is not returned within 30 days of issuing the RMA then any credit will be reduced by 50%. A testing fee of
$20.00 will be applied, if the product passes all tests related to the written claim, then the fee will be applied and paid
prior to return of the product. If the product fails the test then the fee will not be applied. If a product is determined to
be non-repairable, a $20.00 testing fee will be applied. The Company may charge a 20% restocking fee for returned
product and/or an order, which is canceled and/or material has already been ordered and/or received to fill such
order. The average lead time for in house repairs is 3 weeks. If you require expedited service a 20% expedite fee will
be assessed to the total cost of repairs with a $20 minimum and $500 maximum. The warranty on repaired items is 90
days against failures in parts and/or workmanship.
The Company’s warranty/repair department will inspect all components, submitted under warranty. Warranty
replacement will be based solely on the analysis and confirmation that the product defect was caused by material and/
or workmanship. The company reserves the right to change the design of the product without assuming any obligation
to modify any product previously manufactured or to replace warranted product other than with redesigned product.
In some cases it is easier for the customer to send a Company purchased product direct to the manufacturer for
replacement. In those cases the customer will be notified that their product falls under that process and should work
with that manufacturer directly. Appendix C shows the purchased parts that falls under this case.
This warranty covers the product replacement only; charges for damages, freight and/or labor will not be accepted.
There are no warranties expressed or implied which extend beyond this Limited Warranty. The loss of use of the
product, loss of time, inconvenience, commercial loss, incidental or consequential damages is not covered. The
Company shall not be liable for incidental, special, or consequential damages including without limitation damages
resulting from personal, bodily injury or death or damages to or loss of use of property.
APPENDIX A
2-Year Warranty Controllers:
Sensortron, Multitron, Touchtron, 24 VAC Timer, Liberator
APPENDIX B
90-Day Warranty Components:
Pressure Hoses, Swivels, Nozzles, Safety Shut-off Guns, Seals, O-Rings, Shop Vac, Electromechanical Devices,
Vacuum Motor Brushes Valves, Regulators
APPENDIX C
Purchased Products that are Handled Direct with the Manufacturer:
Shop Vac, IDX Products, Bill Acceptors, Compressors, Pump Motors, Dixmor Timers, CAT Pumps, Flojet Pumps

Page 2
©2018 - GinSan Industries
PET WASH
SYSTEM
Dimensions
Dimensions (With Optional Cabinet)
19½" 33½"
41"
34"
24"
48"
86"
35"
52"
34"
24"
54"
92"
35"

Page 3
©2018 - GinSan Industries
PET WASH
SYSTEM
Dimensions - Corner Spa (Standard)
33½"
35½"
52½"
19½"

Page 4
©2018 - GinSan Industries
PET WASH
SYSTEM
Dimensions - Corner Spa (In-Bay)
35½"
19½"
33½"

Page 5
©2018 - GinSan Industries
PET WASH
SYSTEM
Wiring Diagram w/GS-400
(Prior to 1/2018)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
PURPLE
PURPLE
Transformer
120VAC to 24VAC
PN 18801
Fuse Holder
1 amp fuse PN 20316
PN 20317
20 position
terminal strip
PN 18721
1 24V Hot Red
2 24V Common Purple
3 Main Water Solenoid Black
4 4th Chemical Orange/Blk
5 Rinse Grey
6 2nd Chemical Pink
7 3rd Chemical White
8 5th Chemical Blue
9 Not Used -
10 Timed Hot Yellow
11 1st Chemical Brown
12 6th Chemical Black/White
13 Not Used -
14 Low Dry Red
15 High Dry White
16 24V Common Purple or Blk
17 24V Common Purple or Blk
18 24V Common Purple or Blk
19 24V Common Purple or Blk
20 24V Common Purple or Blk
Function on 20 Position
Terminal Strip
Function Color
Power Cord
PN 68263
6 Function Solenoid Assembly
PN 18580K x 2
3/8" NC Inlet
Solenoid
PN 19069
WHITE
ORANGE/BLK
PINK
BROWN
PURPLE
Pet Dryer
(optional)
BLACK
WHITE
RED
BLACK
PURPLE
In meterbox hull
See DogTech-005 for
8 + 10 position rotary
See DogTech-006 for
Touchtron doors
BLACK
WHITE
NOTE: For use with 10 position rotary switch. 9th function not
available with touchtron door
. 8th and 9th functions not available
with 8 positon rotary door.
PURPLE
RED
1 2 3 4 5 6
BLACK/WHITE
BLACK- 24V Common
RED- Low Dry
WHITE- High Dry
RED
3/8" NC Inlet
Solenoid
PN 19069
TAN GREY
PRIOR TO JANUARY 1, 2018

Page 6
©2018 - GinSan Industries
PET WASH
SYSTEM
Wiring Diagram w/GS-401
(Prior to 1/2018)
GS -401
COIN COUNT
AUX COUNT
RESET/CANCEL
TIME PER COIN
COINS TO START
COINS PER AUX
LOW TIME ALARM
QUICK RESTART TIME
MODE
INCREASE
(RESET)
DECREASE
(CANCEL)
5
4
3
2
1
A
0000
PURPLE
YELLOW
RED/GREEN
PURPLE
PURPLE
RED
RED
YELLOW
PURPLE
RED
GS-401
PN 77108
Transformer
120VAC to 24VAC
PN 18801
Fuse Holder
1 amp fuse PN 20316
PN 20317
20 position
terminal strip
PN 18721
1 24V Hot Red
2 24V Common Purple
3 Main Water Solenoid Black
4 4th Chemical Orange/Blk
5 Rinse Grey
6 2nd Chemical Pink
73rd White
8 5th Blue
9 Not Used -
10 Timed HotYellow
11 1st Brown
12 6th Black/White
13 Not Used -
14 Low Dry Red
15 High Dry White
16 24V Common Purple or Blk
17 24V Common
18 24V Common
19 24V COmmon
20 24V Common
Chemical
Chemical
Chemical
Chemical
Purple or Blk
Purple or Blk
Purple or Blk
Purple or Blk
Function on 20 Position
Terminal Strip
Function Color
RED/GREEN
Power Cord
PN 68263
6 Function Solenoid Assembly
PN 18581
3/8" NC Inlet
Solenoid
PN 18481P
WHITE
ORANGE/BLK
PINK
BROWN
PURPLE
Pet Dryer
(optional)
BLACK
WHITE
RED
BLACK
PURPLE
In meterbox hull
See DogTe ch-005 for
8 + 10 position rotary
See DogTe ch-006 for
Touchtron doors
BLACK
WHITE
NOTE: For use with 10 position rotary switch. 9th function not
available with touchtron door
. 8th and 9th functions not available
with 8 positon rotary door.
PURPLE
RED
1 2 3 4 5 6
BLACK/WHITE
BLACK-24V Common
RED-Low Dry
WHITE-High Dry
3/8" NC Inlet
Solenoid
PN 18481P
TAN
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
18.
19.
20.
GREY
PRIOR TO JANUARY 1, 2018

Page 7
©2018 - GinSan Industries
PET WASH
SYSTEM
Wiring Diagram w/GS-400
(After 1/2018)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
PURPLE
PURPLE
Transformer
120VAC to 24VAC
PN 18801
Fuse Holder
1 amp fuse PN 20316
PN 20317
20 position
terminal strip
PN 18721
1 24V Hot Red
2 24V Common Purple
3 Main Water Solenoid Black
4 4th Chemical Orange/Blk
5 Rinse Grey
6 2nd Chemical Pink
7 3rd Chemical White
8 5th Chemical Blue
9 Not Used -
10 Timed Hot Yellow
11 1st Chemical Brown
12 6th Chemical Black/White
13 Not Used -
14 Low Dry White
15 High Dry Red
16 24V Common Purple or Blk
17 24V Common Purple or Blk
18 24V Common Purple or Blk
19 24V Common Purple or Blk
20 24V Common Purple or Blk
Function on 20 Position
Terminal Strip
Function Color
Power Cord
PN 68263
6 Function Solenoid Assembly
PN 18580K x 2
3/8" NC Inlet
Solenoid
PN 19069
WHITE
ORANGE/BLK
PINK
BROWN
PURPLE
Pet Dryer
(optional)
BLACK
RED
WHITE
BLACK
PURPLE
In meterbox hull
See DogTech-005 for
8 + 10 position rotary
See DogTech-006 for
Touchtron doors
BLACK
WHITE
NOTE: For use with 10 position rotary switch. 9th function not
available with touchtron door
. 8th and 9th functions not available
with 8 positon rotary door.
PURPLE
RED
1 2 3 4 5 6
BLACK/WHITE
BLACK- 24V Common
RED- High Dry
WHITE - Low Dry
RED
3/8" NC Inlet
Solenoid
PN 19069
TAN GREY
AFTER JANUARY 1, 2018

Page 8
©2018 - GinSan Industries
PET WASH
SYSTEM
Wiring Diagram w/GS-401
(After 1/2018)
GS -401
COIN COUNT
AUX COUNT
RESET/CANCEL
TIME PER COIN
COINS TO START
COINS PER AUX
LOW TIME ALARM
QUICK RESTART TIME
MODE
INCREASE
(RESET)
DECREASE
(CANCEL)
5
4
3
2
1
A
0000
PURPLE
YELLOW
RED/GREEN
PURPLE
PURPLE
RED
RED
YELLOW
PURPLE
RED
GS-401
PN 77108
Transformer
120VAC to 24VAC
PN 18801
Fuse Holder
1 amp fuse PN 20316
PN 20317
20 position
terminal strip
PN 18721
1 24V Hot Red
2 24V Common Purple
3 Main Water Solenoid Black
4 4th Chemical Orange/Blk
5 Rinse Grey
6 2nd Chemical Pink
73rd White
8 5th Blue
9 Not Used -
10 Timed Hot Yellow
11 1st Brown
12 6th Black/White
13 Not Used -
14 Low Dry White
15 High Dry Red
16 24V Common Purple or Blk
17 24V Common
18 24V Common
19 24V COmmon
20 24V Common
Chemical
Chemical
Chemical
Chemical
Purple or Blk
Purple or Blk
Purple or Blk
Purple or Blk
Function on 20 Position
Terminal Strip
Function Color
RED/GREEN
Power Cord
PN 68263
6 Function Solenoid Assembly
PN 18581
3/8" NC Inlet
Solenoid
PN 18481P
WHITE
ORANGE/BLK
PINK
BROWN
PURPLE
Pet Dryer
(optional)
BLACK
RED
WHITE
BLACK
PURPLE
In meterbox hull
See DogTe ch-005 for
8 + 10 position rotary
See DogTe ch-006 for
Touchtron doors
BLACK
WHITE
NOTE: For use with 10 position rotary switch. 9th function not
available with touchtron door. 8th and 9th functions not available
with 8 positon rotary door.
PURPLE
RED
1 2 3 4 5 6
BLACK/WHITE
BLACK-24V Common
RED-High Dry
White-Low Dry
3/8" NC Inlet
Solenoid
PN 18481P
TAN
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
18.
19.
20.
GREY
AFTER JANUARY 1, 2018

Page 9
©2018 - GinSan Industries
PET WASH
SYSTEM
Wiring Diagram w/GS-60
with GS-400II, Coin Accptor & CryptoPay NG
7
423516
Red 24v Hot Red/White coin-
switch com
Pur 24v Com Inlet Water Sol.
Blue 4th function Blue 7th function
Blue 2nd function
Blue 3rd function
Blue 5th function
Blue 1st function
Blue 6th function Blue 8th function
Yel Timed Hot
8
Coin switch
Aux
Red/Blk aux
GS-400II
Red = 24Vac hot
Purple = 24Vac Common
Yellow = Timed hot
Red/green = Coin pulse
Black = - of buzzer
Red/White = + of buzzer
GS-400II
GS-60 with GS-400II and Coin Acceptor
& CryptoPay NG
Cryptopay
NG
Black=24v AC
Yellow=24v AC
Red/grn=signal
Red/grn=signal
Gray=coin counter
Gray=coin counter
Red/green
Red/green
Yellow
Black
Gray
Gray

Page 10
©2018 - GinSan Industries
PET WASH
SYSTEM
Wiring Diagram w/GS-60
with LED6, Coin Acceptor & CryptoPay NG
7
423516
Red 24v Hot Red/White coin-
switch com
Pur 24v Com Inlet Water Sol.
Blue 4th function Blue 7th function
Blue 2nd function
Blue 3rd function
Blue 5th function
Blue 1st function
Blue 6th function Blue 8th function
Yel Timed Hot
8
Coin switch
Aux
Red/Blk aux
GS-60 with LED6, Coin Acceptor
& CryptoPay NG
Cryptopay
NG
Black=24v AC
Yellow=24v AC
Red/green=signal
Red/green=signal
Gray=coin counter
Gray=coin counter
MEI
Bill
Acceptor
DIXMOR LED 6
1 2 3 4 5 6 7 8 9 10
Dixmor LED 6
1.24vac counter=Pur/ bl k
2.coi n pul se=Org/bl k
3.-12vdc horn=Grn/bl k
4.+12vdc horn=Red/bl k
5.earth ground=Grn/bl k
6.ti med hot=Bl u/bl k
7.aux coi n pul se=Yel /bl k
8.credi t card=Wht/bl k
9.24vac common=Grn
10.24vac hot=Org

Page 11
©2018 - GinSan Industries
PET WASH
SYSTEM
Wiring Diagram w/GS-60
with LED7 & CryptoPay NG
MEI
Bill
Acceptor
74 2351 6
Red 24v Hot Red/White coin-
switch com Pur 24v Com Inlet Water Sol
Blue 4
th function
Blue 7
th function
Blue 2
nd function
Blue 3
rd function
Blue 5
th function
Blue 1
st function
Blue 6
th function
Blue 8
th function
Yel Timed Hot
G
S
6
0
8
Coin
switch
Aux
Red/Blk aux
Red/White wire needs
to be moved from 24
hot terminal, to 24 com
terminal for GS-60 to
pulse Dixmor timer.
Dixmor LED 7
1.Coin com.=Gry
2.Coin signal=Brn
3.+12vdc out=Blank
4.-12vdc horn=Blu
5.+12vdc horn=Org
6.24v ac com. in=Grn
7.24v ac hot in=Red
8.Not used=Yel/blk
9.Credit card=Wht/blk
10.Timed load=Wht
Coin
Acceptor
Cryptopay
NG
Yellow=24v AC
Black=24v AC
Red/green=signal
Red/green=signal
Gray=coin counter
Gray=coin counter
DIXMOR
LED 7
10 9 8 7 6 5 4 3 2 1
GS-60 with LED7 & CryptoPayNG

Page 12
©2018 - GinSan Industries
PET WASH
SYSTEM
Wiring Diagram w/GS-610
with LED6 & CryptoPay NG using aux. coin input
GS-610 with LED6 & Cryptopay NG
using aux. coin input
MEI
Bill
Acceptor
DIXMOR LED 6
1 2 3 4 5 6 7 8 9 10
Dixmor LED 6
1.24vac counter=Pur/ bl k
2.coi n pul se=Org/bl k
3.-12vdc horn=Grn/bl k
4.+12vdc horn=Red/bl k
5.earth ground=Grn/bl k
6.ti med hot=Bl u/bl k
7.aux coi n pul se=Yel /bl k
8.credi t card=Wht/bl k
9.24vac common=Grn
10.24vac hot=Org
7
423516
Red 24v Hot Red/White coin-
switch com
Pur 24v Com Inlet Water Sol.
Blue 4th function Blue 7th function
Blue 2nd function
Blue 3rd function
Blue 5th function
Blue 1st function
Blue 6th function Blue 8th function
Yel Timed Hot
8
Coin switch
Blue 9th function
Blue 10th function
0
9
Cryptopay
Red/green=signal
Red/green=signal
Black=24v AC com.
Yellow=24v AC hot

Page 13
©2018 - GinSan Industries
PET WASH
SYSTEM
Wiring Diagram w/GS-160
with LED7, Coin, Bill Accptor & CryptoPay NG
DIXMOR
LED 7
10 9 8 7 6 5 4 3 2 1
74 2 3 5 1 6
Red 24v Hot Red/White coin-
switch com
Pur 24v Com Inlet Water Sol
Blue 4th function
Blue 7th function
Blue 2nd function
Blue 3rd function
Blue 5th function
Blue 1st function
Blue 6th function Blue 8th function
Yel Timed Hot
8
Coin switch
Blue 9th function
Blue 10
th function
GS-610 with LED7, Coin, Bill Acceptor
& Cryptopay NG
Cryptopay
Black=24v AC
Yellow=24v AC
Red/green=signal
Red/green=signal
Gray=coin counter
Gray=coin counter
MEI
Bill
Acceptor
Dixmor LED 7
1.Coin com.=Gry
2.Coin signal=Brn
3.Blank
4.-12vdc horn=Blu
5.+12vdc horn=Org
6.24v ac com=Grn
7.24v ac hot=Red
8.Aux coin=Yel/blk
9.Credit in=Wht/blk
10.Timed load=Wht
0
9

Page 14
©2018 - GinSan Industries
PET WASH
SYSTEM
Wiring Diagram Ultimate Rotary
10 Position with LED6 & CryptoPay NG
10 Position
14
11
18
74 2351 6 8 9
13
12
19
Coin
pulse
9
8
7
6
5
4
3
2
1
Red 24v Hot Pur 24v Com
Inlet Water Solenoid
Blue 4
th function
Blue 7
th function
Blue 2
nd function
Blue 3
rd function
Blue 5
th function
Blue 1
st function
Blue 6
th function
Blue 8
th function
Blue 9
th function
Yel Timed Hot
17
20
21
29
27
26
25
24
22
16
15
10
28
23
Cryptopay
NG
Yellow=24v AC
Black=24v AC
Red/green=signal
Red/green=signal
Gray=coin count
Gray=coin count
Rotary, 10 Position with LED6 and CryptoPay NG
DIXMOR LED 6
1 2 3 4 5 6 7 8 9 10
Dixmor LED 6
1.24vac counter=Pur/bl k
2.coi n pul se=Org/bl k
3.-12vdc horn=Grn/bl k
4.+12vdc horn=Red/ bl k
5.earth ground=Grn/bl k
6.ti med hot=Bl u/bl k
7.aux coi n pul se=Yel /bl k
8.credi t card=Wht/bl k
9.24vac common=Grn
10.24vac hot=Org

Page 15
©2018 - GinSan Industries
PET WASH
SYSTEM
Wiring Diagram Ultimate Rotary
8 Position with LED7 & CryptoPay NG
Dixmor LED 7
1.Coin com.=Gry
2.Coin signal=Brn
3.+12vdc out=Blank
4.-12vdc horn=Blu
5.+12vdc horn=Org
6.24v ac com. in=Grn
7.24v ac hot in=Red
8.Not used=Yel/blk
9.Not used=Wht/blk
10.Timed load=Wht
8 position
25
24
23
28 22
21
26
27
17
15
14
7
423516
13
18
Coin
pulse
6
53
1
Red 24v Hot Pur 24v Com Inlet Water Sol
Blue 4th function
Blue 7th function Blue 2nd function
Blue 3rd function
Blue 5th function
Blue 1st function
Blue 6th function
Yel Timed Hot
12
11
7
2
4
16
DIXMOR
LED 7
10 9 8 7 6 5 4 3 2 1
Rotary, 8 Position with LED7 and CryptoPay NG
Cryptopay
NG
Yellow=24v AC
Black=24v AC
Red/green=signal
Red/green=signal
Gray=coin count
Gray=coin count

Page 16
©2018 - GinSan Industries
PET WASH
SYSTEM
Plumbing Diagram
6 Function Solenoid Assembly
PN 18580 (x2)
3/8" NC Inlet Solenoid
PN 19069
Nozzle
1/2"
Water In
Chemical Chemical
Metering Tip Kit
PN 34672
Injector
PN 34752
3/8" NC OPTIONAL Rinse Solenoid
PN 19069

Page 17
©2018 - GinSan Industries
PET WASH
SYSTEM
Installation Instructions - Corner Spa