Gira eNet User manual

Installation adapter Mini housing
Order No. : 5429 00
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Danger of electric shock. Only use the housing for eNet devices.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Components, panel-mounted housing
(1) Housing lid
(2) eNet mini device
(3) Adapter for eNet universal transmitter and energy sensor
(4) Housing base
(5) Terminal for looping the protective conductor
(6) Strain relief
3 Function
Intended use
- Panel-mounted housing for eNet mini actuators and sensors
- Installation in false ceilings and surface mounting
Product characteristics
- Fastening possible on DIN rail according to DIN EN 60715
1/3
32586002 20.01.2014
Installation adapter Mini housing
10499296
eNet

4 Information for electrically skilled persons
4.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before working on the device, disconnect the power supply and cover up live
parts in the working environment.
Mounting a panel-mounted housing
eNet actuator or sensor is connected correctly.
o Engage the adapter (3) on the eNet universal transmitter or energy sensor.
o Insert the eNet device into the housing base (4) in such a way that the device can be
operated through the housing lid.
Figure 2: Strain relief
o Ensure strain relief (Figure 2).
To ensure secure strain relief, use a maximum of two cables of the same diameter.
Recommended cable for effective strain relief: H05VV-F 3G 1.5.
o Place the housing lid on the housing base and push them together.
32586002 10499296 20.01.2014 2/3
eNet
Installation adapter Mini housing

Open the housing
Figure 3: Open the housing
o Insert a screwdriver into the opening (7) and lever the housing lid outwards slightly
(Figure 3).
o Then push the screwdriver between the strain relief and the housing cover (8) and lever it
upwards.
i An engaged adapter (3) can be levered off with a screwdriver. To do this, apply the
screwdriver in the area of the lock.
5 Appendix
5.1 Technical data
Dimensions W×H×D 97×53×36 mm
5.2 Warranty
The warranty is provided in accordance with statutory requirements via the specialist trade.
Please submit or send faulty devices postage paid together with an error description to your
responsible salesperson (specialist trade/installation company/electrical specialist trade). They
will forward the devices to the Gira Service Center.
Gira
Giersiepen GmbH & Co. KG
Elektro-Installations-
Systeme
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 12 20
42461 Radevormwald
Deutschland
Tel [phone] - 602-0
Fax [phone] - 602-191
www.gira.de
[email protected]
32586002 10499296 20.01.2014 3/3
eNet
Installation adapter Mini housing