GKB Verifire NC6960VD User manual

Before operating this unit, please read this manual
thoroughly and retain it for future reference. CR100000377
GKB
VeriFire The Fire/Smoke Detect
Expert
GKB NC3860VD & GKB NC6960VD Camera
Quick Setup version: 2.1
User’s Manual

GKB NC3860VD & GKB NC6960VD Camera
!!
!
1
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!

GKB NC3860VD & GKB NC6960VD Camera
!!
!
2
Warning and Precaution
This information is provided to ensure your safety and to prevent loss either
physical or financial. Read carefully before using the product. Read all sections
of this manual where the following marks are shown.
Ignoring this may result in material loss and/or serious personal
injury including death.
Ignoring this may result in material loss and/or slight personal
injuries.
Do not disassemble.
Precaution
1. Do not drop the camera.
GKB VeriFire Series IP Camera is not designed to resist heavy impact. Handle
with care to avoid damage to sensitive internal components.
2.Do not expose the camera to radio activity and mount facing strong light
sources. Exposing the camera to radioactivity or strong light over long periods of
time will damage the camera’s sensor.
3.Do not supply voltage higher than GKB VeriFire Series regulated voltage.
Before supplying power to your camera, please make sure the power supply
voltage is supported by your camera.
4.Do not install the camera under unstable light conditions. Installing GKB VeriFire
Series in environments with unstable light conditions may cause the camera to
function abnormally.

GKB NC3860VD & GKB NC6960VD Camera
!!
!
3
TALBE OF CONTENTS
1. Network Setup
2. Configuration Setup
3. Fire/Smoke Detection Alarm Setup
4. Appendix
Do not dispose this camera as general waste. This product must be treated as a recyclable product.
Contact your local government recycling program or the supplier of the product to confirm the proper
method of disposal.
!

GKB NC3860VD & GKB NC6960VD Camera
!!
!
4
1. NETWORK SETUP
VeriFire IP Camera and NVR System Design
LAN Connection Setup
WAN Connection Setup

GKB NC3860VD & GKB NC6960VD Camera
!!
!
5
2. CONFIGURATION SETUP
Mouse buttons: Left Click Enter& Right Click ESC
1. Move the mouse to the bottom of the monitor, and left click MENU
to call up Menu display.
2. Left click Login/Logout to login the system
account: [ aa ] / password: [ 11 ]

GKB NC3860VD & GKB NC6960VD Camera
!!
!
6
3. Left click Setup
4. Left click Network

GKB NC3860VD & GKB NC6960VD Camera
!!
!
7
5. Left click +/- to change the highlighted option to DHCP
6. Left click top-right corner x, click Yes and wait

GKB NC3860VD & GKB NC6960VD Camera
!!
!
8
7. It will assign IP Address automatically, click Yes to continue
8. Left click Pre-Camera Setup
9. Left Click +/- to change the highlighted option to Pre-Camera
!!!!!!!!!!!!!!

GKB NC3860VD & GKB NC6960VD Camera
!!
!
9
10. Left Click Settings to call up IP CAM Setup
11. Left click Discover and left click on the IP CAM in the list for the URL.
This URL is automatically assigned by DHCP
!!!!!!!!!!!!!!
!!!!!!!!!!!!!!
!!!!!!!!!!!!!!

GKB NC3860VD & GKB NC6960VD Camera
!!
!
10
12. On local/remote PC site, enter IP address which is assigned automatically
by DHCP, ex: [192.168.99.223] in your IE browser and you'll see below.
User name : admin / Password : admin

GKB NC3860VD & GKB NC6960VD Camera
!!
!
11
3. FIRE / SMOKE DETECTION ALARM SETUP
1. Move the mouse to the bottom of the monitor, and left click MENU
to call up Menu display.
2. Left click Camera Setup

GKB NC3860VD & GKB NC6960VD Camera
!!
!
12
3. Left click +/- to change the highlighted option to Camera
4. Left click +/- to check/uncheck Fire/Smoke Detection this item, the
default setting is √: checked

GKB NC3860VD & GKB NC6960VD Camera
!!
!
13
5. More detail settings left click Fire/Smoke Settings , it will show as below
Left click +/- buttons to adjust the value (0-10 seconds) at Pre-record and
Post-record
◎Only one out of Fire/Smoke and Motion Detection can be chosen

GKB NC3860VD & GKB NC6960VD Camera
!!
!
14
4. Appendix
Alarm Setup
Connect to IP Cam
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!
!
!
!
!
!
!
!
!
1. Enter IP Address in your IE browser on PC site
User name : admin Password : admin
2. Click on top-right corner VeriFire -> General Setting -> check Enable
Digital Output

GKB NC3860VD & GKB NC6960VD Camera
!!
!
15
3. To increase the fire/smoke detection sensitivity by adding Create Fire
Point : click on top-right corner VeriFire -> Fire & Smoke Line -> Create
Fire Point -> Save
4. To decrease false alarm rate, you can add Create Disable Mask: click
on top-right corner VeriFire -> Detection Mask -> Create Disable Mask -
> Save
!

GKB NC3860VD & GKB NC6960VD Camera
!!
!
16
Connect to IP Cam & NVR
!!!!!!!!!!!! !
!
1. Left click Setup

GKB NC3860VD & GKB NC6960VD Camera
!!
!
17
2. Left click Alarm Setup
3. Alarm Setup display

GKB NC3860VD & GKB NC6960VD Camera
!!
!
18

GKB NC3860VD & GKB NC6960VD Camera
!!
!
19
©2016 GKB Security Corporation. Specifications are subject to change without prior notice.