Glacier bay HDQFP1B4227CP Assembly instructions

INSTALLATION AND CARE GUIDE
THANK YOU
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this kitchen
faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER
HOMEDEPOT.COM/GLACIERBAY
PULL-DOWN KITCHEN FAUCET
SKU#
1009093895
1009093889
OMS#
323987234
323987242
Model#
HDQFP1B4227CP
HDQFP1B4227SP

2
Table of Contents
Important Information..............................2
Warranty ...................................................2
Pre-Installation.........................................2
Planning Installation...........................2
Tools and Hardware Required.............2
Package Contents...............................3
Installation................................................4
Operation...................................................7
Care and Cleaning ....................................8
Troubleshooting........................................9
Service Parts...........................................10
Important Information
□Observe all local plumbing and building codes.
□Cover the drain in your sink to avoid losing parts.
□Review the care and cleaning section included in this guide.
Warranty
LIMITED LIFETIME WARRANTY
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that prove defective.
Simply return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-
434-5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer
purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental / inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
a five year limited warranty from the date of purchase, with all other terms of this warranty applying except the
duration of the warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other
rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for
more details.
Pre-Installation
PLANNING INSTALLATION
Before you begin to install this product, ensure that all parts are present. Compare parts with the package
contents list. If any part is missing or damaged, do not attempt to install the product. Contact customer service for
replacement parts.
TOOLS AND HARDWARE REQUIRED
SILICONE
Adjustable
wrench
Safety
goggles Sealant Channel-lock
pliers Allen wrench

3 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Pre-Installation (continued)
PACKAGE CONTENTS
Faucet Assembly Soap Dispenser Assembly
A
B*
E
F
G
I*
H*
J*
L*
K*
C
D
M*
N*
O*
P*
Q*
NOTE: *Items come pre-assembled.
Part Description Quantity
A Faucet assembly 1
B* Pull-down spray 1
C Deck plate 1
D Gasket 1
E FastMount™ 1
F Quick connector 1
G Weight 1
H* Outlet hose 1
I* Cap 1
Part Description Quantity
J* Water supply line 2
K* Pull-down spray hose 1
L* Cap 1
M* Pump nozzle 1
N* Dispenser holder 1
O* Washer 1
P* Lock nut 1
Q* Bottle 1

4
Installation
H
A
J
K
1
H
A
J
K
2
C
D
□Shut off the water supply. Remove the old faucet.
□Clean off the mounting surface.
□WITHOUT DECK PLATE: Insert the outlet hose (H),
water supply lines (J) and pull-down spray hose
(K) through the mounting hole in the sink until the
faucet (A) sets on top of the sink.
□WITH DECK PLATE: Install the faucet body through
the top of sink (not included). Place a bead of
clear silicone sealant (not included) around the
base of the deck plate(C). Align the hole in the
gasket (D) and deck plate (C) with the mounting
hole in the sink (not included). Insert the outlet
hose (H), water supply lines (J) and pull-down
spray hose (K) through the deck plate (C) and
mounting hole in the sink until the faucet (A) sets
on top of the deck plate (C).
1 Installing the faucet assembly
NOTE: If the sink is uneven, use silicone under the
gasket (D).
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.

5 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
4
1
2
K
3
G
G
K
A
E
E
2
1
Push up
Sink
Sink
Screw
□From underneath the sink, secure the faucet
assembly (A) to the sink with the FastMount™
system (E).
□Push the FastMount™ system (E) up over the
threads until it stops against the bottom of the
sink, then turn to tighten.
□Install the weight (G) through the pull-down spray
hose (K).
□Insert the weight clip at the weight sticker on the
pull-down spray hose (K) and slide the weight (G)
down onto the clip.
2 Securing the faucet assembly 3 Installing the weight
Weight
sticker
Hexagon
face up

6
Installation (continued)
2
1
M
N
O
P
Q
3
2
1
1
3
I
H
K
L
K
K
F
H
F
□Remove bottle (Q), bottle lock nut (P) and washer
(O) from shank of dispenser holder (N). Remove
pump nozzle (M) from dispenser holder (N).
□Insert shank of dispenser holder (N) and pump
nozzle (M) through top of sink.
□Attach washer (O), bottle lock nut (P) and bottle
(Q) to dispenser holder (N) and screw tightly.
5 Installing the soap dispenser
assembly
4 Attaching the quick connector
□Remove the cap (L) from the the pull-down spray
hose (K) and the outlet hose (H).
□Attach the quick connector (F) to the pull-down
spray hose (K).
□Attach the quick connector (F) to the outlet hose
(H). Pull down the quick connector (F) to ensure
it is secure.

7 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued) Operation
1
1
2
B
A
K
3
2
1
6 Connecting supply lines 1 Checking for leaks
2 Removing the quick connector
□Use two adjustable wrenches to connect and
tighten the supply lines to the supply valves.
□Connect the red supply line to the hot water
supply valve.
□Connect the blue supply line to the cold water
supply valve.
□Detach the pull-down spray (B) from the pull-
down spray hose (K). Hold the pull-down spray
hose (K) firm to prevent it from retracting into the
faucet body (A).
□Ensure the handle is in the off position. Turn the
hot and cold water supplies on and check all
connections for leaks. If leaks are discovered,
check the connections to ensure they are tight
and properly secured.
□Lift the handle to allow the water to run for
approximately one minute. This flushes away any
debris that could damage the internal parts.
□Turn the water off and reattach the pull-down
spray (B).
□If it is necessary to remove the quick
connector (F), push the quick connector
housing up, hold the housing together
and pull down.
CAUTION: Ensure the supply lines do not kink, twist or
bend into a “V” or “L” shape during installation. Do not use
if there are visible signs of damage.
CAUTION: Use caution when removing the quick
connector hose to prevent cutting your hands.
BLUE LINE
RED LINE
HOT
COLD

8
Operation
Care and Cleaning
3-2
3-4
3-3
□To clean, wipe down with a damp cloth and towel dry.
□Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
□Close (shut off) the water supply to the faucet.
□Use wrenches to loosen and remove supply hose.
□Rinse the supply hose end with screen filter in a cup of water to flush loose sediment.
□Stubborn sediment can be removed with a small brush.
□Inspect before re-installing onto the shut off valve.
□Use two adjustable wrenches to connect and tighten the supply lines to the supply valves.
□Connect the red supply line to the hot water supply valve.
□Connect the blue supply line to the cold water supply valve.
1
1
2
CAUTION: Ensure the supply lines do not kink, twist or
bend into a “V” or “L” shape during installation. Do not use
if there are visible signs of damage.
BLUE LINE
RED LINE
HOT
COLD
3-1
3 Checking for low or reduced water pressure

9 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Troubleshooting
NOTE: Refer to the service parts section in this manual
for a detailed drawing showing the location of the parts
listed below.
Problem Possible Cause Solution
There are leaks from
the handle.
□The bonnet nut is loose.
□The O-ring on the cartridge
is dirty or damaged.
□Tighten the bonnet nut.
□Clean or replace the O-ring.
The aerator leaks or has
a reduced water flow.
□The aerator is dirty or
mis-fitted.
□The cartridge may be
clogged.
□Remove the aerator and check for debris.
□Remove the cartridge and check for debris.
□Ensure the aerator is properly installed.
There are leaks from
the hose underneath
the deck.
□The connection between
the pull-down spray and
pull-down spray hose may
be loose.
□Tighten the connection between the pull-down
spray and pull-down spray hose.
The hose does not
retract.
□The weight is not installed
in the correct position.
□The pull-down spray hose
is obstructed.
□Reinstall or readjust the weight.
□Check under the sink to ensure the pull-down
spray hose is not obstructed.
The water pressure is
irregular or low.
□The screen filter located
at the end of the supply
hose may be clogged with
debris.
□Turn off the water supply valves
□Use wrenches to disconnect the supply lines
from supply valves
□Clean screen filter by placing hose end in a
cup of water for a few seconds to remove any
possible debris. Stubborn debris can be removed
from screen with a small cleaning or toothbrush
Note: Do not attempt to disassemble or remove
the screen filter from supply hose
□Connect the red supply line to the hot water
supply valve
□Connect the blue supply line to the cold water
supply valve
□Use wrenches to reconnect and tighten the
supply lines to the supply valves
□Turn on the water supply valves
□Turn on the faucet to verify if water flow has
improved. Repeat steps above if necessary.
There is no hot or cold
water.
□The hot or cold water
supply lines may be
kinked or twisted.
□Ensure hot and cold water supply lines are not
kinked or twisted. Reinstall the supply line if
necessary.

10
Service Parts
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
DATECODE:
DONOT REMOVE
1-888-328-2383
HOT
* Specify finish
Many replacement cartridges, aerators, and drain
assemblies can be purchased at your local The
Home Depot store or online at HOMEDEPOT.COM.
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Part Description Part No.
1Handle Cap Assembly A66D558
2* Metal Handle A079301
3* Trim Ring A508029
4 Adjusting Ring A104413BPA-C
5 Ceramic Disc Cartridge A507906N
6* Cover Plate & Putty Plate A667B59
7 Quick Mounting Nut A527128
Part Description Part No.
8 Hose Guide A032184GR
9* Pull Down Spray Head
1.75gpm A568061N
10 Hose Adapter A663123N
11 Spray Hose A515220WGR
12 Weight A527114
13*Soap Dispenser Assembly A502009
Product ID tag can be found
on the hot supply line.