Glendale GL0151 User manual

Page | 1
Please check if you have all the fittings listed below
Component Parts
Please check if you have all the parts as listed Note: The quantities below are the correct amount to
complete the assembly. In some cases more fittings may be supplied than are required.
GL0151 Polycarbonate gazebo 4x3m Assembly Instructions
If you need help with assembly or missing parts please call our customer care team on: 0121 616 1939
IMPORTANT –Please read these instructions carefully before assembling
WE RECOMMEND 2 PEOPLE TO ASSEMBLE THIS GAZEBO

Page | 2
Dimensions EXTERNAL
Width
400 cm
Depth
300 cm
Height
280 cm
Assembly Requirements
Number of people required to assemble
2
Approximate assembly time
3-4 Hours
If you need help with assembly or missing parts please call our customer care team on: 0121 616 1939

Page | 3
Assembly Instructions
Step 1 & 2
Connect all the leg uprights
(A) first with the cross
members B + B1 & C + 1
also connect the foot plates
M to the uprights and include
the bracket support bars Q &
R. once the diagram is
complete you can do the
same for the other half of the
gazebo.
Now join the 2 halves
together with connection
insert Y and screw into place
this will strengthen the frame
Step 3 & 4
Join the 4 roof bars by
connecting them with the top
section o, ensuring they are
at the correct position as the
photo inset. Add the roof
supports to the frame with
part P1
If you need help with assembly or missing parts please call our customer care team on: 0121 619 1939

Page | 4
Step 5 & 6 & 7
Step 8 & 9 & 10 & 11
Continue adding the lower
roof sections. Then add the
end stop bar to the gazebo
part L.
Secure it with clip X and bolt
X1.
The structure should now be
complete now add the
curtains simply slide the
pulley (curtain hooks) through
the gap in the frame and
attach the curtains.
Make sure all nuts & bolts are
tightened and ensure the
gazebo is fixed to the ground.
If you need help with assembly or missing parts please call our customer care team on: 0121 616 1939
Add all the side supporting
sections G and secure onto
the frame with part P
You can now proceed to start
to slide the roof sections in V
making sure the correct way
up is inserted the roof is
clearly marked, please
remove the protective film
and start with the top part first
as shown. To secure the
polycarbonate roof in place
insert the holding bars in
place part J

Page | 5
Distributed by:
Glendale Leisure
46 Barn Street, Digbeth
Birmingham B5 5QB
www.Glendale-leisure.com
Safety and Care Advice
Your Gazebo frame can be left outside all year round but we advise
the curtains are taken off during the winter months and stored in a
cool dry frost free place (do not store wet). This will prevent them
from deteriorating.
*VERY IMPORTANT
YOU MUST SECURE YOUR GAZEBO TO THE GROUND AS SOON AS IT IS
BUILT
FOR GRASS YOU CAN USE THE GROUND STAKES PROVIDED
FOR HARD SURFACE FIXINGS BOLTS MUST BE USED
FOR SPARES OR REPLACEMENT CANOPIES PLEASE CONTACT US,
THANKS FOR PURCHASING THIS GAZEBO.
If you need help with assembly or missing parts please call our customer care team on: 0121 616 1939