Global Sources SD-X0608T User manual

Metal Garden Shed
OWNER'S MANUAL
Instructions for Assembly
-1-
Metal Garden Shed
OWNER'S MANUAL
Instructions for Assembly
Requires two people and takes 2-3 hours for lnstallation.Requires two people and takes 2-3 hours for lnstallation.
Quick & Easy AssemblyQuick & Easy Assembly
Ridge Reinforced WallsRidge Reinforced Walls
-1-
SD-X0608T

-2-
BEFORE YOU START
Owner's Manual
Prior to installation, it is important that you contact your local government authority to
determine if building approval is required. Study and understand this owner's manual.
Important information and helpful tips will make your construction easier and more
enjoyable.
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your
building model. Review all instructions before you begin. During assembly, follow the
step sequence carefully for correct results .
Parts
Check to be sure that you have all the necessary parts for the building.
Separate contents of the carton by the part number while reviewing parts list.
Familiarize yourself with the hardware and fasteners for easier use during
construction. These are packaged within the carton. Note that extra fasteners have been
supplied for your convenience.
TOOLS MAY REQUIRED
Use heavy duty gloves when handling steel sheets and flashing
PLAN AHEAD
Site Selection
lAvoid overhanging trees as much as possible as leaves will make regular cleaning
necessary and broken branches are a potential hazard.
lSmall trees,bushes or fences nearby can be helpful,acting as a wind break.
Site Preparation
The site must be prepared so that the base of the shed is level all round and checking
with a spirit level is required.
The base can be constructed by treated timber or concrete,in order to stop the moisture
getting into the shed.The shed is not designed to be built onto lawn directly.Also the
ground will get muddy during rainy days.
If a concrete pad is made,it is important that this slopes towards the edges to prevent
water ingress.
Time must be allowed for any concrete or cement to dry before building the shed on top.
Bases can also be constructed from bricks,blocks,or mounted on a concrete pad.
The bricks or blocks should be cemented onto firm and level concrete footings and the
greenhouse frame drilled and screwed to the base.
IMPORTANT NOTES:
lFind someone to help you:it is much easier with someone to hold parts,pass tools
ect.Also some steps require two people to lift structures together.This is not very
heavy work so would suit most able-bodied people.
lAllow plenty of time:rushing often causes errors and the re-doing of incorrect
assemblies.If you have never built a shed before,it can take most of a day to carefully
complete the construction.
lHave the right tools to hand.
lSafety clothing as recommended in the 'Tools' section.
lIdeally lat out the parts and check that all are present before commencing
construction.Lay on cloths or plastic sheets if there is any risk of scratching the parts.
lTighten all nuts carefully,being sure not to miss any.Check the frame is square and
using a spirit level to check that it is upright.
PLAN AHEAD
Watch the weather:
Please be sure the day you select for installation is dry and calm.
DO NOT attempt to assemble your shed in windy weather
because of risk of damage to panels, or personal injury. Be careful
of wet or muddy ground.
Teamwork:
Whenever possible, two or more people should work together to
assemble the building. One person can position parts or panels
while the other is able to handle the fasteners and the tools.
M2.4&M5 5.5X7
PH1

1L
PART
NO. Qty.
2
-3-
1R 2
1
2L
1
2R
1
1
3L
3R
1
5
1
1
4L
4R
1
6
1
1
1
1
1
10L
10R
1L
PART
NO. Qty.
2
-3-
955mm
1R 2
955mm
1
2L
1169mm
1
2R
1
1
3L
3R
1
5
1
1
4L
4R
1720mm
1
6
1090mm
1
7
81
1105mm
1
1105mm
1
1118mm
1
1118mm
10L
10R
702mm
1032mm
1169mm
702mm
1720mm
9
11
901mm
2
2
901mm
PART
NO. Qty. PART NO. Qty.
2
12
356mm
1
16
1029mm
2
2
13
14
959mm
959mm
4
17
1179mm
6
18
548mm
1
19
1304mm
1
20
662mm
2
2
21L
21R
2
22L
1
660mm
24-1
2
2
B3
B4
286mm
286mm
B1
B2
139mm
139mm
2
2
1
15-1
1304mm
1
15-2
1304mm
1
660mm
24-2
1
16-1
1029mm
904mm
2
22R
904mm
1
23L
1118mm
1
23R
1118mm

-4-
PART
NO. Qty.
P2
PART
NO. Qty.
D1 1
P3
P4
2
1207mm
P5 2
P6 2
D2 1
-4-
PART
NO. Qty.
P2
PART
NO. Qty.
1710X552mm
D1 1
P3
P4
P8 2
P5 2
P6 2
D2 1
P1 2
1720mm
1720mm
1720mm
1720mm
2
4
4
1207mm
1207mm
PART
NO. Qty.
G2 4
2
GF
GD
GB
GC
GE
4
4
4
2
F1
F2
F3
S3
380
10
80
324
S2
220
1710X552mm
GS 4

-5--5-
13
14
16-1
16
13
14
21R
21L
21L
21R
12
B1 B3 B4
B2
12 B1
B3
B4
B2
P6
P5
19
GC
GC
P8
P8
P5
P6
20
GC
GC
15-1
24-1
15-2
24-2
17
17
17
GE
17
GE
11
9
1R
1R
1L
1L
2L
2R
3L
3R
5
10L
10R
22L
22R
23L
23R
7
8
P1
P1
P4
P4
P4
P4
P2
P2
P3
P3
P3
P3
D1
D2
18
6
4R
4L
22R
22L
11
9

ⅡⅢ
ⅡⅢ
-6-
Two holes need to fit together, if not pls turn 1L 1R 2L 2R around and
try again.
F1x24
3Lx 13Rx 15 x 1
1L x21R x 22L x12R x1
ⅡⅢ
ⅡⅢ
1L 2L
2R
1R
1L
3R
5
1R
3L

1、When diagonal measurements are equal,the frame is
square.
2、The Floor Frame must be BOTH square AND
level or the holes will not line up properly.
-7-
53R
3L
1R
1R
1L
1L
2L 2R

- 8 -
F1x9S3 x10
P1 x1P4 x1
Wall panels ALWAYS attach to the Floor
Frames with Screws in the manner shown
above .Rest the Panel on the Floor Frame and
the holes in the Panel should line up with the
holes in the Frame
F1
F1 Ⅱ
Ⅰ
P1
P1
P4
F1
F2
F2 x1
Ⅰ
Ⅱ

22R x 1
- 9 -
F1x5 S3 x5
22R

- 10 -
F1x 9 S3 x9
P2 x1P4 x1
F1
F1 Ⅱ
Ⅰ
F1
P2
P4
Ⅰ
Ⅱ

F1x12 S3 x1022Lx1
22L
23R x1
23R
22L
23R
F1
F1

F1x24 S3 x22
P4 x1
P3 x1
P3
P4
F1
ⅠⅡ
ⅢⅣ
23L
22R
22R
23L
22Rx123L x1
F1
F1
F1
F1
F1
F1 Ⅱ
Ⅰ
Ⅰ
Ⅱ

F1x 15 S3 x15
P4 x1
P1 x1
22L x1
P1
P4
ⅠⅡ
Ⅲ
F2
F1
22L
F2 x1
F1
F1
F1 Ⅱ
Ⅰ
Ⅱ
Ⅰ

-14-
F1x50 S3 x50
P2 x1
P3 x 3
P3
P3
P3
P2

9x211 x 2F1x 36 S3 x
3
Assembly No. 11, then No. 9 one by one.and secure them with
(F1) screws from inside as shown.
-15-
F1
9
9
11
11
6
3
6

-16-
21L x 221R x2B1 x 2B2 x2B3 x 2B4 x 2F2x20
GF x4
12 x2
x2
x2
21L
21R
B4 B3
B1
B2
GF GF
12
S3 x20
12
B3
21L

Assembly No. 10L, then No. 10R one by one.
-17-
S3 x20
F1x 22
10L
10R
10L x110R x1
10L 10R

-18-
G2 x4
7x18x1
87
7
8
78
Notice the hole on it
S3 x
F1x
88

F2
16 x1F2x2
-19-
16-1x1
Two holes need to fit together, if not pls turn 16 16-1 around and
try again.
16
16-1
16-1
16

F2
F2
13
14
13 x214 x2F2x8
-20-
x2
Ⅱ
Ⅲ