
All Rights Reserved | Global Special Eects www.GlobalSpecialEects.com | (256) 229-5551
OPERATING
Ensure the machine is plugged in and turn the power switch to the ON
position. Allow the machine up to (10) minutes to warm up. A red LED light
will appear once the machine has finished warming up.
Use wireless remote, LCD Controller, or DMX to trigger machine.
The machine can be placed at ground level or hung with the included
hanging bracket. Ensure machine angle is less than 15°.
Throughout use, ensure the fluid reservoir does not run empty.
1.
2.
3.
4.
MAINTENANCE
• Keep the machine clean by wiping down with dry cloths.
• Ensure the fluid reservoir cap is properly tightened to avoid spills.
• After approximately 40 hours of use, we recommend cleaning the machine by
running 80% distilled water and 20% vinegar through the machine.
• If the spray nozzle requires cleaning, remove nozzle head and clean with vinegar.
• Ensure the machine is o and unplugged before cleaning or performing any
maintenance. Do not clean immediately after using machine. Before any cleaning
or maintenance, allow machine to cool down.