Globalmediapro F0806 User manual

2Megapixel TVI & AHD Hybrid Speed Dome Camera
User manual
Version F0806

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
2
Content
1. Caution.................................................................................................................................................................................................. 3
2. Product Introduction........................................................................................................................................................................ 5
2.1. Description and features............................................................................................................................................ 5
2.2. Product package........................................................................................................................................................... 6
2.3. Name and function of each part.............................................................................................................................7
2.4. Installation........................................................................................................................................................................9
3. DIP switch setting...........................................................................................................................................................................15
3.1. DIP Switch setting......................................................................................................................................................15
3.2. Protocol setting............................................................................................................................................................16
3.3. Address DIP Switch Setting...................................................................................................................................17
3.4. OSD Menu setting......................................................................................................................................................18
3.4.1. OSD Menu control............................................................................................................................................18
3.4.2. Menu function.....................................................................................................................................................19
3.4.3. Set-up menu, Execute and delete by keyboard...................................................................................39
3.4.4. OSD Message Description ...........................................................................................................................43
4. TROUBLE SHOOTING................................................................................................................................................................45
5. Dimension..........................................................................................................................................................................................46
6. Configuration diagram..................................................................................................................................................................47
7. Specification.....................................................................................................................................................................................48

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
3
1.Caution
Thank you for purchasing our product. Please operate the product after being fully aware of the
manual. Pease contact us if you have any query.
Precaution
Note the following matters before the installation of the product.
Avoid the following places for the installation.
A high/low temperature: Using indoor-cameras
in the places of +50°C~ -10°C can cause
troubles and lower its capacity.
Snow, rain and wet: Humidity or water and
any liquid inside-camera can cause troubles.
Vibration, shock: They bring on problems or
errors of the camera.
Oil, gas: Oil and gas can damage the camera
as they go through the cameras.
Closing to High frequency and electric power
lines: Setting the camera up around
electromagnetic units or power supplier can
cause problems.
Direct light, exposure to the air: In the case of
that sets indoor- cameras outside where the
weather is changeable, it can cause problems.

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
4
Caution in Use
Do not disassemble the unit and put alien substances in the unit.
Disassembling the unit or putting alien substances such as a metal can make the
camera defective.
- Make sure of power switch-off before the installation.
: Ensure power switch-off and check the voltage the camera before the installation.
- Do not give the unit a shock and an operation.
: Giving a strong shock or an excessive power on the button, terminal can cause problem.
This product has been designed and manufactured in accordance with the harmonized European standards,
following the provisions of the below stated directives.
Electromagnetic Compatibility Directive 89/336/EEC(EN61000-3-2:1995, EN61000-3-3:1995, EN50081-
1:1992, EN50082-1:1997)
This devise complies with part 15 of the fcc rules operation is subject to the following two conditions: (1) This
device may not cause harmful interference and (2) This device must accept any interference received
including interference that may cause undesired operation
Caution :
①Must use AC24V power source, current intensity must be less than 2A and must use
a double winding transformer
②Never extend the power line from adaptor to camera.
③Please use more thick cable than 18AWG(1.0mm), if you want to extend the power
line.
④You must use one adaptor per one camera that is being provided.
⑤Use extra power supplier, If you want to supply many piece of cameras.

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
5
2.Product Introduction
2.1. Description and features
This camera, 2 Megapixel Full HD TVI/AHD Hybrid speed dome camera, has been designed
elegantly for buildings, department stores that need to be in harmony with the interior as a high
speed dome camera, including various observation functions.
- Feature -
Support full 2.2 Megapixel Full HD-SDI (1080p)
Optical x20 zoom rates, Digital x16 zoom rates
Enhance Electronic sensitivity lowest illumination 0.0005Lux (DSS Control)
Change to B/W model (0.1Lux) at night by ICR DAY & Night
Digital Noise Reduction (DNR), True WDR and Defog Functions
Motion detection, Privacy zones.
Various surveillance functions
Preset(250), Group(12), Tour, Trace, Spiral
Remove moisture inside of camera by using fan & heater
Automatic movement detecting area as Alarm receiver unit or Sensor
RS422/485 remote control
Built-in Auto Tilt (Automatic 180° tilt rotation)
Available to public office, indoor or outdoor, Parking violation

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
6
2.2. Product package
The following items are included in the product package.
MEGA Speed Dome Camera
1 pcs
Wall Mount Bracket
1 pcs
Power Supply
(Power Cable & Linear AC24V/2.5A adapter)
1 pcs
Bracket Blank Rubber
2 pcs

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
7
2.3.Name and function of each part
- Exterior -
No
Name
Function
①
Wall Mount Bracket
Attached wall bracket on the wall
②
Camera Housing
Outdoor PTZ housing.
- when the product is released, outdoor housing and indoor
housing are united, when the user installs the camera in indoor
and in-ceiling, only use indoor housing taking apart from outdoor
housing.
③
PTZ Camera
PTZ dome drive (Pan/Tilt/Zoom)
④
Dome Clear Bubble
Protect Lens and PTZ dome drive

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
8
- Connect Cover Inside -
No
Name
Function
①
Power Port
AC 24V / 2.5A Power input
②
Power LED
Turn on the light when its power on
③
HD Video Output Port
You can change mode to TVI or AHD as DIP S/W
④
15 Pin D-SUB
Port(Female)
PTZ camera connector
⑤
ALARM In/output port
ALARM in/output (4 In / 1 Out)port
⑥
Communication port
RS-485 PTZ control communication port
⑦
External video output
port
CVBS Video output, Camera Control’s Power Frequency is set
automatically installation country’s video output Hertz, 50Hz –
PAL / 60Hz –NTSC. It doesn’t display Camera OSD and icon
⑥
④
⑤
①
②
③
⑦

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
9
2.4.Installation
1. Installing wall mount bracket
①Loosen 4 bolts of cover and 3 bolts of
camera body from camera housing (Not
loosen the bolts completely)
②-1. Put cables (Power, Video, data) in the
bracket and fasten bracket on the wall by 4
bolts then close both holes provided 34mm
Blank rubber
②-2. When the camera is installed retaining
wall or Concrete building, put the cables in
the bracket as picture and close hole by
TAB/P1/11" flexible connector(28")

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
10
④Open housing connecting cover and
connect Power, data, video cables
⑤Connect to Clear bubble
③Connect Cover housing to wall bracket as
above.

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
11
2. Installing Ceiling Mount Bracket
①Loosen 4 bolts of cover and 3 bolts of
camera body from camera housing (Not
loosen the bubble cover bolts completely)
②Attach Pole box on the ceiling
③Tighten
Ceiling pole
to pole box
④Tighten Joint
couple
⑤Tighten Cover
housing

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
12
⑥Connect to Data, Video and Power
⑦Connect to the clear bubble

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
13
3. Using Speed Dome Junction Box
- Speed dome junction box installation -
Fasten screw up 4 screws of the junction box in order of Camera housing →Wall mount bracket →
Water-proof cover →Speed dome junction box →Wall
Junction box connection Camera connection

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
14
For connecting cables in the junction box, Please refer to wall mount bracket installation part The PTZ
junction box inside part is as below.
※Please refer to the speed dome junction box user manual.
AC 24V Power Supply
AC 24V Input Port
AC 24V Output Port
Power LED
AC OUT
AC IN
Input port
Output port
LAN (Input)
LAN (output)

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
15
3.DIP switch setting
3.1. DIP Switch setting
DIP SW 1
You can set communication speed, protocol and number of the camera
DIP SW 2
-Termination Resistor (DIP S2/SW1):
Turn the last camera on the data line as a switch to turn
on/off the terminal resistor on.
Turn the DIP SW of some of the farthest cameras on in
the case of the data lines distributed to several
directions.
(** The default is off. **)
- TVI / AHD SELECT (DIP S2/SW2) :
Select video output mode to TVI or AHD
-Address / Initial Select (DIP S2/SW3):
Set ADDRESS DIP SW in the status of ADDRESS
(*Reference to next page*)
Set the communication speed (baud rates) and Protocol
(Demand for the technical inquiry) up in the state of the
INITAIL.
(.*** The first default is ADDRESS.**)
- PAL / NTSC (DIP S2/SW 4) :
Select PAL / NTSC system
- Video / Pattern (DIP S2/SW 5) :
It will be display color pattern in pattern mode.
DIP SW 1
DIP
SW 2

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
16
3.2. Protocol setting
Set up the switch
The switch for select protocol The switch for select baud rates
Change S2 to INIT if user wants to change protocol
①Please the power off
②Switch protocol that user wants to change on in the above the table
③The power on, then the set protocol and baud rates are displayed.
④The power off, if every setting is right. Then the change of protocol is finished.
⑤Change No. 3 of S2 to ADDR before the power on, then the power on after setting the address of the
camera.
⑥Try it again with the information as above the table, if something is wrong

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
17
3.3. Address DIP Switch Setting
ADDRESS is set No 1 ~ 255 by DIP switch 1~8.
RX
NO
DIP SWITCH (HEX)
RX
NO
DIP SWITCH (HEX)
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
ON
OFF
OFF
OFF
OFF
OFF
OFF
33
ON
OFF
OFF
OFF
OFF
ON
OFF
2
OFF
ON
OFF
OFF
OFF
OFF
OFF
34
OFF
ON
OFF
OFF
OFF
ON
OFF
3
ON
ON
OFF
OFF
OFF
OFF
OFF
35
ON
ON
OFF
OFF
OFF
ON
OFF
4
OFF
OFF
ON
OFF
OFF
OFF
OFF
36
OFF
OFF
ON
OFF
OFF
ON
OFF
5
ON
OFF
ON
OFF
OFF
OFF
OFF
37
ON
OFF
ON
OFF
OFF
ON
OFF
6
OFF
ON
ON
OFF
OFF
OFF
OFF
38
OFF
ON
ON
OFF
OFF
ON
OFF
7
ON
ON
ON
OFF
OFF
OFF
OFF
39
ON
ON
ON
OFF
OFF
ON
OFF
8
OFF
OFF
OFF
ON
OFF
OFF
OFF
40
OFF
OFF
OFF
ON
OFF
ON
OFF
9
ON
OFF
OFF
ON
OFF
OFF
OFF
41
ON
OFF
OFF
ON
OFF
ON
OFF
10
OFF
ON
OFF
ON
OFF
OFF
OFF
42
OFF
ON
OFF
ON
OFF
ON
OFF
11
ON
ON
OFF
ON
OFF
OFF
OFF
43
ON
ON
OFF
ON
OFF
ON
OFF
12
OFF
OFF
ON
ON
OFF
OFF
OFF
44
OFF
OFF
ON
ON
OFF
ON
OFF
13
ON
OFF
ON
ON
OFF
OFF
OFF
45
ON
OFF
ON
ON
OFF
ON
OFF
14
OFF
ON
ON
ON
OFF
OFF
OFF
46
OFF
ON
ON
ON
OFF
ON
OFF
15
ON
ON
ON
ON
OFF
OFF
OFF
47
ON
ON
ON
ON
OFF
ON
OFF
16
OFF
OFF
OFF
OFF
ON
OFF
OFF
48
OFF
OFF
OFF
OFF
ON
ON
OFF
17
ON
OFF
OFF
OFF
ON
OFF
OFF
49
ON
OFF
OFF
OFF
ON
ON
OFF
18
OFF
ON
OFF
OFF
ON
OFF
OFF
50
OFF
ON
OFF
OFF
ON
ON
OFF
19
ON
ON
OFF
OFF
ON
OFF
OFF
51
ON
ON
OFF
OFF
ON
ON
OFF
20
OFF
OFF
ON
OFF
ON
OFF
OFF
52
OFF
OFF
ON
OFF
ON
ON
OFF
21
ON
OFF
ON
OFF
ON
OFF
OFF
53
ON
OFF
ON
OFF
ON
ON
OFF
22
OFF
ON
ON
OFF
ON
OFF
OFF
54
OFF
ON
ON
OFF
ON
ON
OFF
23
ON
ON
ON
OFF
ON
OFF
OFF
55
ON
ON
ON
OFF
ON
ON
OFF
24
OFF
OFF
OFF
ON
ON
OFF
OFF
56
OFF
OFF
OFF
ON
ON
ON
OFF
25
ON
OFF
OFF
ON
ON
OFF
OFF
57
ON
OFF
OFF
ON
ON
ON
OFF
26
OFF
ON
OFF
ON
ON
OFF
OFF
58
OFF
ON
OFF
ON
ON
ON
OFF
27
ON
ON
OFF
ON
ON
OFF
OFF
59
ON
ON
OFF
ON
ON
ON
OFF
28
OFF
OFF
ON
ON
ON
OFF
OFF
60
OFF
OFF
ON
ON
ON
ON
OFF
29
ON
OFF
ON
ON
ON
OFF
OFF
61
ON
OFF
ON
ON
ON
ON
OFF
30
OFF
ON
ON
ON
ON
OFF
OFF
62
OFF
ON
ON
ON
ON
ON
OFF
31
ON
ON
ON
ON
ON
OFF
OFF
63
ON
ON
ON
ON
ON
ON
OFF
32
OFF
OFF
OFF
OFF
OFF
ON
OFF
64
OFF
OFF
OFF
OFF
OFF
OFF
ON
- ADDRESS Table -
- 7 DIP switched on, it can be set 65 ~ 128 as above.
- 8 DIP switched on, it can be set 129~192 as above.
- 7&8 DIP switched on, it can be set 129~255 as above.

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
18
3.4. OSD Menu setting
3.4.1. OSD Menu control
■OSD (ON SCREEN DISPLAY) menu control
It is the function to call up the Menu of the camera.
◈User can not only set Preset, Group, Tour, Swing, Trace functions of the camera up by the menu,
but also set them up by shortening keys.
■OSD MENU Enter
The menu is displayed on the screen with the key tone when user presses No.1 and menu key.
■ OSD Menu Control
- Move cursor by moving joystick up and down.
- Select Menu or change to setting and move to Joystick left
or right.
■ Cancellation of OSD menu
- Press No. 1 + Menu button.
<< DOME CAMERA SETUP >>
- DOME DRIVER SET.
- CAMERA SET.
- SPECIAL SET.
- TIME SCHEDULE SET.
- EXIT.
JOYSTICK U/D/L/R TO SELECT.
②
①

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
19
3.4.2. Menu function
■ OSD Menu tree
Main menu
Sub menu 1
Sub menu 2
DOME DRIVER SET
SET PTZ FUNCTION
SELECT PRESET
PRESET ID SET
PRESET PTZ SET
SWING SET
GROUP SET CH:01~12
TOUR SET
TRACE SET
PREVIOUS MENU PAGE
RUN FUNCTION
n/a
SET PRIVACY
MANUAL P/T SPEED
AUTO TILT MOVE
SMART PAN/TILT
RETURN TO MAIN PAGE
CAMERA SET
ID SET
n/a
H-V REVERSE
AGC CONTROL
SHUTTER SPEED
SHARPNESS LEVEL
BRIGHTNESS LEVEL
COLOR LEVEL
NEXT MENU PAGE
└ DNR LEVEL
└ STABILIZER
└ FOCUS MODE
└ MAX ZOOM LIMIT
└ DSS CONTROL
└ BACK LIGHT MODE
WDR SET / HLC SET / BLC SET
└ WHITE BALANCE
n/a
└ NEXT MENU PAGE
└ DAY&NIGHT
└ DEFOG ON/OFF
└ DEFOG LEVEL
└ PREVIOUS MENU PAGE
RETURN TO MAIN PAGE
SPECIAL SET
OSD DISPLAY
n/a
SELECT ALARM
MOTION DETECTION
ALARM CHANNEL ON/OFF
ALARM PRESET SET
AUTO REFRESH TIME
NEXT MENU PAGE
└ USE SHORTCUT KEY
└ RUN DEHUMIDIFICATION
└ LANGUAGE
└ USE PASSWORD
└ CHANGE PASSWORD
└ FACTORY RESET !
└ PREVIOUS PAGE
RETURN TO MAIN PAGE
TIME SCHEDULE SET
SCHEDULE FUNCTION SET
n/a
SCHEDULE BACKLIGHT SET
RESUME TIME SET
HOME POSITION SET
TIME SET

2Mega TVI & AHD Hybrid Speed Dome Camera User manual
20
RETURN TO MAIN PAGE
EXIT
n/a
n/a
- DOME DRIVER SET.
: Set Pan, Tilt or various surveillance functions.
- CAMERA SET.
: Set Video, screen display functions.
- SPECIAL SET.
: Set motion detection, alarm, multi-language, Password, Factory
default
- TIME SCHEDULE SET.
: you can set time schedule for various function in this menu.
- EXIT.
: Out of OSD menu
■ DOME DRIVER SET
1. SET PTZ FUNCTION
Set up or execute Preset, Swing, Group, Tour, Trace.
Select “DOME DRIVER SET" in main menu, then move joystick left / right and display sub menu list.
Select "1. SET PTZ FUNCTION" then move joystick left/right and display various surveillance function
list.
1). SELECT PRESET CH
- Set up preset Number.
- Set up preset No by moving Joystick left / right.
: Number up / : Number down
◈Set up Max. 250 programmable Preset No.
2). PRESET ID SET
- User can set ID of each preset No.
- Select "2. PRESET ID SET" then moves joystick left or
right and displays input of preset ID options.
- DOME DRIVE SET.
1. SET PTZ FUNCTION.
2. RUN PTZ FUNCTION:UNDEF
3. SET PRIVACY.
4. MANUAL P/T SPEED:MIDDLE
5. AUTO TILT MOVE:OFF
6. SMART PAN/TILT:ON
7. RETURN TO MAIN PAGE.
JOYSTICK U/D/L/R TO SELECT.
<< DOME CAMERA SETUP >>
- DOME DRIVER SET.
- CAMERA SET.
- SPECIAL SET.
- TIME SCHEDULE SET.
- EXIT.
JOYSTICK U/D/L/R TO SELECT.
- SET PRESET & RUN.
1. SELECT PRESET CH:001
2. PRESET ID SET
3. PRESET PTZ SET
4. SWING SET
5. GROUP SET CH:01~12
6. TOUR SET
7. TRACE SET
8. PREVIOUS MENU PAGE.
JOYSTICK U/D/L/R TO SELECT.