Globe Flight GF-PX540 Manual

■Components
■Dimensions
■Features
Pixim WDR Mini Camera
Instruction Guide
High Resolution color for
crisp, clear video
ㆍProgressive image capture
ㆍ540 HTVL equivalent
High Sensitivity for low-light
images
ㆍThe built-in high sensitivity
PIXIM ORCA C-MOS enables
a clear image even at 0.8Lux
Wide Dynamic Range provides
excellent quality in high-
contrast environments
ㆍ 120dB maximum dynamic range
DNR (Digital Noise Reduction)
ㆍThe amount of low illuminance
noise has been significantly
reduced, and the signal to noise
ratio (S/N ratio) as well as
horizontal resolution have been
improved, resulting in a clear
and sharp image display even
in the dark.
Controlled by OSD Menu
ㆍThe camera can be controlled
by selecting text displayed on the
monitor screen.
Additional Functions
ㆍAutomatic White Balance
ㆍBacklight Compensation
ㆍAutomatic Gain Control
ㆍMotion Detection
ㆍDigital Zoom (x4)
ㆍPrivacy Mask (12 Zone)
ㆍDigital Day / Night
PRESETS
SETUP
LENS DC
PRESETS CUSTOM
NORMAL
INDOOR
OUTDOOR
WDR AUTO
WHITE BAL. ATW
AGC MIDDLE
DNR AUTO
SENS-UP AUTO
SPECIAL
EXIT
LENS
ㆍLENS
Choose the lens type DC, Video
and Manual lens by using the
selector button.
DC MODE
BIAS
LIMIT
PREVIOUS PAGE
80
------------
------------
-20-42 60
0 255
SETUP
LENS DC
VIDEO
MANUAL
WDR AUTO
WHITE BAL. ATW
AGC MIDDLE
DNR AUTO
SENS-UP AUTO
SPECIAL
EXIT
PRESETS CUSTOM
WDR
Wide Dynamic Range is essential for capturing the images at all light levels.
The main function of the WDR is to accumulate the scope of contrast between
the brightest and darkest points in the picture. With the AUTO option, the
distribution of brightness values is automatically adapted to the recording
scenario.
ㆍUser can select the desired level
HIGH, USER & LOW, in addition
to automatic adaptation (Auto),
by moving the selector button.
WDR LEVEL
BIAS
PREVIOUS PAGE
-----------
-360 36
LIMIT
-----------
0 3636
SETUP
LENS DC
PRESETS CUSTOM
WDR USER
AUTO
HIGH
LOW
WHITE BAL. ATW
AGC MIDDLE
DNR AUTO
SENS-UP AUTO
SPECIAL
EXIT
WHITE BALANCE
White Balance is a function which compensates different colors of light being
emitted from different light sources.
Users can select the above levels as they desire according to the environment.
ㆍATW (Auto Tracking White Balance)
The ATW mode continuously monitors
color temperature. With WB Control set to ATW, color temperature & White
balance can be automatically adjusted accordingly.
ㆍATWDesat (ATW Desaturating)
When WB is set to ATWDesat, the Extended Color temperature is desaturated
i.e when there is a excess of light temperature, ATWDesat Function is used as
well as it reduces the Noise. The limits of the color temperature setting remain
2000K and 11,000K
ㆍAWC (Auto White Balance)
When set to AWC, Color temperature of the Light is automatically adjusted.
ㆍManual (Manual White Balance)
Manual White Balance (MWB) Mode is used when other White Balance Options
are failed.
ATW CONTROL
PREVIOUS PAGE
LOWLIMIT
HIGHLIMIT 2800
------------
------------
75005.5K 11K
2K 5.5K
SETUP
LENS DC
PRESETS CUSTOM
WDR AUTO
WHITE BAL. ATW
ATWDes
AWC
MANUAL
AGC MIDDLE
DNR AUTO
SENS-UP AUTO
SPECIAL
EXIT
AGC
Automatic Gain Control is a feature which adjust automatically according to
the incoming Signal. By positioning the arrow to 'AGC' on the SETUP menu
with the help of UP and DOWN buttons, you can select the Mode you wish to go
ㆍAs the level of gain increases, the
screen gets brighter and the level
of noise also increases.
SETUP
LENS DC
PRESETS CUSTOM
WDR AUTO
WHITE BAL. ATW
AGC MIDDLE
HIGH
OFF
LOW
DNR AUTO
SENS-UP AUTO
SPECIAL
EXIT
DNR
DNR is Digital Noise Reduction System with a maximum gain of 24 DB.
ㆍAUTO
There is a reduction in noise
level with almost no ghost image.
ㆍOFF
There is no reduction in noise
level.
SETUP
LENS DC
PRESETS CUSTOM
WDR AUTO
WHITE BAL. ATW
AGC MIDDLE
DNR AUTO
OFF
SENS-UP AUTO
SPECIAL
EXIT
SENS-UP
Sens-up helps maintain a bright, clear screen image by automatically detecting
changes in the level of light in low light level conditions.
SENS UP SETUP
SENS-UP X4
PREVIOUS PAGE
SETUP
LENS DC
PRESETS CUSTOM
WDR AUTO
WHITE BAL. ATW
AGC MIDDLE
DNR AUTO
SENS-UP AUTO
OFF
SPECIAL
EXIT
■Setup Page Menu
30.0
36.0
15.0
39.1
39.1
50.6
39.1
39.1
50.6
30.0
60.7
1. COLOR MINI CAMERA
2. SCREWS
4. INSTRUCTION GUIDE
■Cable Connections
ㆍIndoor : Indoor environment.
ㆍOutdoor : Outdoor environment.
ㆍNormal : Normal environment.
ㆍCustom : Custom setting mode.
ㆍPosition the arrow to point to 'SENS UP' on the SETUP menu by using the
UP and DOWN buttons.
ㆍSelect the value required by pressing the LEFT or RIGHT button.
● AUTO : Low light level automatic mode. (X2~X32)
● OFF : The function does not operate.
ㆍPress the SET button when all the settings are complete.
EXIT
Saves all the setting menus and then exits.
POWER
VIDEO OUT
UP button
RIGHT button
LEFT button
DOWN button
SET button

MOTION
This product has a feature that allows you to observe movements of objects
in on the screen, hence a single individual can conduct supervision efficiently.
The camera detects an object's movement by sensing disparity of outline,
and level of brightness and color.
DZOOM
Digital P/T/Z are used to create a zoom lens effect. Zoom Factor (1X to 4X)
Pan(±100%, center of image can be moved to left and right edges of screen)
Tilt(±100%, center of image can be moved to top and bottom edges of screen)
ㆍBy Selecting ON, DZoom is
enabled.
ㆍBy Selecting OFF, DZoom is
disabled.
DZOOM
ZOOM
PAN
PREVIOUS PAGE
-----------
-100 100
TILT
-----------
-100
0
0 100
-----------
1 4
SPECIAL
CAMERA ID OFF
DAY&NIGHT AUTO
FLIP OFF
DZOOM ON
OFF
OFFMOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
SPECIAL
CAMERA ID OFF
DAY&NIGHT AUTO
FLIP OFF
DZOOM OFF
ON
OFF
MOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
ㆍ White : MOTION ZONE Position movement
Green : MOTION ZONE Size enlargement
Red : MOTION ZONE Size reduction
ㆍ For MOTION ZONE Confirm, long press SET button
MOTION DETECTION
PREVIOUS PAGE
MOTION ZONE..
ACTIVITY THR.
------------
0 25 255
MOTION ZONE SETUP
PRIVACY MASK SETUP
Hide an area you want to hide on the screen.
SPECIAL
CAMERA ID OFF
DAY&NIGHT AUTO
FLIP OFF
DZOOM OFF
OFFMOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
PRIVACY MASK SETUP
PRIVACY MASK OFF
MASK COLOR WHITE
PREVIOUS PAGE.
ENABLE MASKS (1 to 6)
MASK 1 ON
MASK 2 OFF
MASK 3 OFF
MASK 4 OFF
MASK 5 OFF
MASK 6 OFF
PREVIOUS. NEXT.
ENABLE MASKS (7 to 12)
MASK 7 OFF
MASK 8 OFF
MASK 9 OFF
MASK 10 OFF
MASK 11 OFF
MASK 12 OFF
PREVIOUS.
ㆍ White : PRIVACY-ZONE Position movement
Blue : PRIVACY-ZONE Size enlargement
or reduction
ㆍ For PRIVACY-ZONE Confirm, long press
SET button
■Advanced Page Menu
VIDEO I/O
Choose video system between PAL and NTSC by moving the selector.
RESOLUTION
Choose resolution between high and normal with the selector (RIGHT/LEFT)
ㆍThe high resolution supports
Progressive Rate video up to
540 TV Line and normal resolution
supports 480 TV Line.
ADVANCED SETUP
VIDEO I/O PAL
RESOLUTION NORMAL
HIGH
BACKLIGHT OFF
SHARPNESS -8----------8
-8----------8APERTURE
RETURN
SYNC INT
VERSION (D25-3.1)
RS485 SETUP
PAL
VIDEO LEVEL
PREVIOUS PAGE
COLOR BAR OFF
110
-------------
80 150
ADVANCED SETUP
VIDEO I/O PAL
NTSC
RESOLUTION NORMAL
BACKLIGHT OFF
SHARPNESS -8----------8
-8----------8APERTURE
RETURN
SYNC INT
VERSION (D25-3.1)
RS485 SETUP
BACKLIGHT
Backlight is feature of a Camera which compensates when there is a large
amount of background light.
SYNC
Two sychronisation modes are available, INTERNAL and EXTERNAL
LINE LOCK. In LINE-LOCK mode, it synchronises the video signal between
cameras without a synchronous generator. The line-lock synchronisation
is only used in areas of 60Hz (NTSC) / 50Hz (PAL).
- INT : Internal synchronisation
- LL : External line-lock synchronisation
ㆍ If 'LL' is selected, it can be adjusted
to the desired phase.
Press the SET button.
ㆍAdjust to the desired phase from
0 to 624.
LINE LOCK
V PHASE
PREVIOUS PAGE
519
-------------
0 624
ADVANCED SETUP
VIDEO I/O PAL
RESOLUTION NORMAL
BACKLIGHT OFF
SHARPNESS -8----------8
-8----------8APERTURE
RETURN
SYNC LL
INT
VERSION (D25-3.1)
RS485 SETUP
ㆍWhen Backlight is ON, Back Light
gets activated.
ㆍ White : BL-ZONE Position movement
Green : BL-ZONE Size enlargement
Red : BL-ZONE Size reduction
ㆍ For BL-ZONE Confirm, long press
SET button
BL-ZONE
ADVANCED SETUP
VIDEO I/O PAL
RESOLUTION NORMAL
BACKLIGHT ON
OFF
SHARPNESS -8----------8
-8----------8APERTURE
RETURN
SYNC INT
VERSION (D25-3.1)
RS485 SETUP
SHARPNESS
The outline of the video image becomes cleaner and more distinctive as the
l evel of SHARPNESS increases. If the level gose up excessively, however,
it may affect the video image and generate noise.
ITEM NTSC PAL
Image Sensor
Effective Pixels
Dynamic Range
Horizontal Resolution
Scanning Frequency
Min. Illumination
Day & Night
White Balance
Erectronic Shutter
DNR
Privacy Masking
AGC
Camera ID
S/N Ratio
Video Output
Sync. System
Operating Humidity
Operating Temp.
Weight
Power Supply
Pixim's 1/3" DPS ORCA CMOS
720(H) x 540(V)
120dB(Max), 102dB(Typical)
Max 540TV Lines
15.734KHz(H), 59.944(V)
0.8 Lux (F/1.2, 50IRE)
D&N Function by Digital Change(Auto/Off)
Auto / AWB / Manual
up to 1/22,000 sec
Auto / High / Low
12 Zones
Low / Auto / High / Off
On / Off
More than 50dB
Composite video output 75 ohm terminated
Internal
30% ~ 90% RH
-10˚C to 50˚
Approx. 55g
DC12V±10% (Max. 170mA)
ㆍThe available range of level is -8 ~ 8
ADVANCED SETUP
VIDEO I/O PAL
RESOLUTION NORMAL
BACKLIGHT OFF
SHARPNESS -8 ---------- 8
-8 ---------- 8APERTURE
RETURN
SYNC INT
VERSION (D25-3.1)
RS485 SETUP
The outline of the video image becomes cleaner and more distinctive as the
level of APERTURE increases. If the level gose up excessively, however,
it may affect the video image and generate noise.
APERTURE
ㆍThe available range of level is -8 ~ 8
ADVANCED SETUP
VIDEO I/O PAL
RESOLUTION NORMAL
BACKLIGHT OFF
SHARPNESS -8 ---------- 8
-8 ---------- 8APERTURE
RETURN
SYNC INT
VERSION (D25-3.1)
RS485 SETUP
RS485 SETUP (Option)
This function sets up the camera communication status when controlling the
camera through an external control device.
RS485 SETUP
PREVIOUS PAGE
PROTOCOL : PELCO-D 2.4K
1 < 1 > 255
CAMERA # :
ADVANCED SETUP
VIDEO I/O PAL
RESOLUTION NORMAL
BACKLIGHT OFF
SHARPNESS -8 ---------- 8
-8 ---------- 8APERTURE
RETURN
SYNC INT
VERSION (D25-3.1)
RS485 SETUP
■Specifications
■Special Page Menu
CAMERA ID
User can enter a unique name for the respective camera.
The maximum length of the ID is ten characters.
ㆍYou can choose the ON and OFF
with the selector. If you select ON,
the entered camera ID is displayed
at the selected position in the video
picture (normal operation).
ㆍ Please select the setup button while
in ON mode.
ㆍSelect the desired position with the
selector.
CAMERA ID
ID CAM-001
POSITION UP-LEFT
PREVIOUS PAGE.
① Move the cursor to the letter
required by using the Set-Up button.
② Select an ID from A,B~Y,Z, a,b~y,z
0,1~8,9 by using the LEFT and
RIGHT buttons.
③ Repeat the above steps until the ID
is complete.
CAMERA ID
ID CAM-001
POSITION UP-LEFT
PREVIOUS PAGE.
① Select the position where the ID
is to be displayed by using the
LEFT and RIGHT buttons.
SPECIAL
CAMERA ID OFF
ON
DAY&NIGHT AUTO
FLIP OFF
DZOOM OFF
OFFMOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
FLIP
Select "OFF" to show the image as normal. Select "ON" to reflect image horizontally.
DAY & NIGHT
This camera has a function that automatically selects the mode that is appropriate
for daytime or night-time conditions. The COLOR mode operates in daytime
conditions to provide optimum colors, and BW mode operates in nighttime
conditions to enhance the definition of the image.
SPECIAL
CAMERA ID OFF
DAY&NIGHT AUTO
BW
COLOR
FLIP OFF
DZOOM OFF
OFFMOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
DAY & NIGHT SETUP
COLOR → BW
BW →COLOR
PREVIOUS PAGE
-----------
160 60
TIME DELAY
-----------
50 20
24
-----------
0 60
PRIVACY MASK SETUP
SPECIAL
CAMERA ID OFF
DAY&NIGHT AUTO
FLIP OFF
HORIZ
VERT
BOTH
DZOOM OFF
OFFMOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
BOTHVERT
HORIZOFF