GO2 GTP-0044 User manual

2/2/22, 3:12 PM
Getting Started Guide for the Goldtouch Go!2 Mobile Keyboard
https://www.goldtouch.com/support/go2-mobile-keyboard/
1/3
Go!2 Mobile Keyboard Getting Started
Guide
To connect your GTP-0044 Go!2 Mobile USB Keyboard:
The Goldtouch Go!2Mobile Keyboard is Plug-and-Play for both Windows® and Mac OS®. The keyboard doesn’t
require any additional drivers for installation.
Setting up your new keyboard is easy:
1. Select your operating system, by adjusting the switch located on the back of the keyboard to either PC or Mac
mode. (Please note, keyboards are in PC mode by default).
2. Plug the Goldtouch Go!2 Mobile Keyboard’s USB male connector into a free USB port on your desktop or
laptop computer.
3. Please allow sufficient time for Windows or Mac OS to automatically recognize the keyboard and install the
proper drivers.
4. When the system level drivers are installed and Windows or MAC OS setup is completed, begin working.
To connect your GTP-0044W Go!2 Mobile Bluetooth USB Keyboard, please use the following directions:
Bluetooth Validation
The Goldtouch Go!2 Travel Keyboard is equipped with Bluetooth technology. Bluetooth is a short-range wireless
technology that lets you connect multiple computers, input devices, mobile phones, and handheld devices to each
other without cables. To use the Goldtouch Bluetooth Keyboard, please check to make sure that your device is
Bluetooth capable, and that Bluetooth is turned on. You may check your manufacturer part number or invoice to
see if your device is equipped with a Bluetooth Receiver.
If you aren’t sure your device is equipped with Bluetooth technology, please refer to the Bluetooth Validation
guide in the GTP-0044W User Manual.
Begin by selecting your operating system, by adjusting the switch located on the back of the keyboard to PC or
Mac mode. (Please note, keyboards are in PC mode by default).
Next follow the directions for your specific device:
Bluetooth Pairing with PC
1. Turn on the power using the power switch on the back of the keyboard.
2. Press the Connect button on the back of the keyboard, the blue pairing light on the keyboard status bar will
blink when the keyboard is in pairing mode.
3. Scan for Bluetooth devices on your PC or tablet.
4. Once your PC has recognized the device, you will be presented with a pairing code. Enter the pairing code on
the Bluetooth keyboard and press Enter.

2/2/22, 3:12 PM
Getting Started Guide for the Goldtouch Go!2 Mobile Keyboard
https://www.goldtouch.com/support/go2-mobile-keyboard/
2/3
5. Please allow time for your system to automatically install the proper drivers for your new keyboard.
Bluetooth Pairing with Mac
1. Turn on the power using the power switch on the back of the keyboard.
2. Press the Connect button on the back of the keyboard, the blue pairing light on the keyboard status bar will
blink when the keyboard is in pairing mode.
3. Scan for Bluetooth devices on your Mac, iPad or iPhone.
4. Once your Mac has recognized the device, you will be presented with a Passkey. Enter the Passkey on the
Bluetooth keyboard and press Enter.
5. Please allow time for your system to automatically install the proper drivers for your new keyboard.
Bluetooth Pairing with Android 3.0 or Older
1. Turn on the power using the power switch on the back of the keyboard.
2. Press the Connect button on the back of the keyboard.
3. Scan for Bluetooth devices on your Android device.
4. Once your Android device has recognized the keyboard, you will first be asked to enter in a Pin Code for your
keyboard on your Android Device. Please note, you may enter any 4 digit Pin number that you like.
5. Next, enter the same 4 digit Pin Code (from step 4) on your Goldtouch Keyboard and press Enter. (We
recommend that you write down your Pairing code, or you will need to re-pair if your device disconnects.)
Note – Android 4 or higher pairs like a PC)
Bluetooth Pairing with Samsung Galaxy
1. Turn on the power using the power switch on the back of the keyboard.
2. Press the Connect button on the back of the keyboard.
3. Scan for Bluetooth devices on your Samsung Galaxy.
4. Once your Samsung Galaxy has recognized the device, you will be presented with a Passkey. Enter the
Passkey on the Bluetooth keyboard and press Enter.
5. Please allow time for your system to automatically install the proper drivers for your new keyboard.

2/2/22, 3:12 PM
Getting Started Guide for the Goldtouch Go!2 Mobile Keyboard
https://www.goldtouch.com/support/go2-mobile-keyboard/
3/3