Godrej Appliances WTEON ARG 70 5.0 FNTNS User manual

*The image is for representation purpose only.
WTEON ARG 70 5.0 FNTNS
WTEON 700 A 5.0

Branch Address/Service Connect
Environment & Energy Conservation Suggestions
25

*The image is for representation purpose only.
(with digital display)

WTEON ARG 70 5.0 FNTNS
WTEON 700 A 5.0
7 kg
Inner Wash
Tub

Max tilt angle on the supporting face : 1°.
Installing machine on an unstable
location can create noise as machine may vibrate.
This can be dangerous since vibrations may
cause the machine to move.
Keep a distance of at least 10cm between the sides
and rear of your machine to the nearest wall.
Do not place your machine in an area with high
humidity or direct exposure to sunlight or rain.
This can
Result in insulation damage
Cause deformation or discolouration of the plastic
parts
To check whether your machine is in level open the lid
of machine, pour water into the tub up to the level just
above pulsator and check if the water level matches
with steel drum holes along the periphery.
Trolley is not recommended.
If a trolley is used it should be a metallic
trolley with four adjustable legs and
with proper locking to avoid movement
during function of machine.
Removal of packaging materials
Please ensure all packaging / bottom cushion to be
removed from the machine before starting machine.
CAUTION: Operating the machine with the
packaging may cause movement/unbalanced
condition and can damage the machine parts.
MACHINE NOT LEVEL MACHINE LEVEL
Allow 10 cm

Connecting the Electrical plug of your washer to Wall Socket
Connect the 3-pin power cord to a properly grounded Standard
Indian 3-pin outlet. Never plug it into an ungrounded outlet.
If the external socket does not have grounding terminal,
then a separate grounding is needed.
Live and neutral terminals in Socket should not be reverse.
Burying copper plate:
Connect the Ground Wire to a Ground Copper Plate and bury
it more than 75cm in the ground.
A Gas pipe, Telephone wire, lightening rod, Neutral, Extension cords
without ground terminals, plastic, etc.
Using Grounding Wire:
Connect the Ground Wire to the socket provided exclusively
for Grounding.
Using a short-circuit breaker:
If Grounding methods described above are not possible,
a separate circuit breaker should be employed and
installed by a qualified electrician.
SEPERATE GROUNDING METHODS (ANY ONE TO BE FOLLOWED)
Never connect ground to:
Note: All electrical wirings or modifications should be done by a qualified electrician only.
E
NL

*The image is for representation purpose only.

*The image is for representation purpose only.

(min.) (min.) (min.) (min.)
15 min
(wash +
in–built
soak)
Energy label declaration program - ‘Strong’ - by default water will be ‘High’ for energy program.
User can change the water level - at any other water levels, energy rating will be not considered.
15 min
(wash +
in–built
soak)

3.1 - 7 kg.