gofanco USBCMST2HDMI User manual

USB-C MST Hub
to 2x HDMI
User's Guide
G4-0061A
P/N: USBCMST2HDMI

2
Thank you for purchasing from gofanco. Our
products aim to meet all your connectivity needs
wherever you go. For optimum performance
and safety, please read the instructions carefully
and keep this User’s Guide for future reference.
If you need more information about our
products, please visit www.gofanco.com. For
technical support, please email us at
[email protected]. For drivers/manuals
download, please go to www.gofanco.com/
download.
Important Safety Notices
Please read safety instructions carefully before
installation and operation.
• Please pay close attention to all warnings
and hints for this device
• Do not expose this unit to rain, heavy
moisture, or liquid
• Do not repair the device or open the
enclosure without professional guidance
to avoid electric shocks. Doing so may void
your warranty
• Keep the product in a well-ventilated
location to avoid damage from overheating

3
Introduction
gofanco USB-C MST Hub to 2x HDMI enables
you to connect with 2 external monitors to your
USB-C enabled computer for multitasking.
Features
•SupportsMirrormodewithidenticalcontent
displayed on each display, Extended mode
with individual content displayed on each
screen, and video wall mode which
combines multiple monitors into one large
display
•Supports UHD video resolutions up to
3840x2160@30Hz
•SupportsUSB-Cwith DisplayPort Alternate
mode or Thunderbolt 3 port
PackageContents
•USB-C MST Hub to 2x HDMI
•User's guide

4
System Requirements
•PC with an available USB-C with
DisplayPortAlternatemodeorThunderbolt
3 port
•Windows®10 / 8.x / 7 (32-/64-bit)
Product Layout
Figure 1: Layout
•USB-C Input: Connect to PC's USB-C port
•HDMI Output (x2): Connect to HDMI
displays with HDMI cables (not included)
USB-C Input
HDMI Output (x2)

5
Hardware Installation
Important: The source USB-C output must
support DisplayPort Alternate (DP Alt) mode or
Thunderbolt 3 technology for this hub to work
properly. Please verify DisplayPort Alternate
mode over USB-C or Thunderbolt 3 with your
computer manufacturer.
1. Power off all devices you plan to connect to
the unit.
2. Connect the unit to your PC's USB-C
connector.
3. Connect your HDMI monitors to the unit's
HDMI Outputs with HDMI cables (not
included).
4. Power on all of the connected devices.
5. The adapter is ready for use.

6
Signal DisplayPort (DPAlternate mode)
Ports 2
Compliance DisplayPort 1.2
Connectors Input: 1x USB-C, Male
Output: 2x HDMI, Female
Resolution Up to 3840x2160@30Hz
Audio 7.1-CH
AMD Eyefinity / Nvidia Surround Video
Cards
AdvancedMSTgraphics technology issupported
by AMD Eyefinity or Nvidia Surround graphics
adapters. For Mirror mode, Extended mode, and
advanced display setup such as video wall, refer
to your graphics card's menu for more details.
Specifications

7
Disclaimer
The product name and brand name may be
registered trademarks of related manufacturers.
TM and ® may be omitted on the user’s guide.
The pictures on the user’s guide are just for
reference, and there may be some slight
differences with the actual products.
We reserve the right to make changes without
prior notice to a product or system described
herein to improve reliability, function, or design.

Thank you for choosing gofanco
www.gofanco.com