Operaton Steps:
Take the water tank out of the base, open the water nlet cover
and fill the water tank wth clear water. Close the water nlet
cover and put the water tank onto the base carefully.
Put the ar ext nto the socket on the top of the water tank.
.Connect the man supply, swtch on the unt.(Never run the unt
when there s no water n water tank.), the man connecton lamp
wll on. The unt starts workng. The led lghts green when there s
water n tank, the led lghts red when the water finshed n tank
and the devce turns off automatcally.
5