BM4*12(5PCS)
PWB4*12(5PCS)
5
5
1.
cloth) at first, then fix the neck to the rear cabinet with 5 pcs
BM4*12 as image 1.
2.Fix the base to the TV unit as image 2.
3.Insert 5 pcs PMB4*12 screw as image 3
place the TV face down on a soft and flat surface (blanket,foam,
Please remove the base before you hang up the TV to the wall-mounted.
The LED displays is very fragile, it must be protected at all times when installing or removing
the base, please make sure that the hard or sharp object which can scratch or damage the LED
displays can not touch the displays, remember to place the TV face down on a soft and flat
surface (blanket,foam,cloth)to prevent any damage to the TV.,
image 1
image 2
image 3
image 4