Goodmans 334149 User manual

USER MANUAL
MODEL: 334149
55W 2.1 BLUETOOTH SOUNDBAR
AND SUBWOOFER

Welcome1
55w 2.1 Soundbar with passive subwoofer
2.1 In The Box
2.2 Front View
2.3 Side View
2
2.4 Rear View
Quick Setup
3.1 Power On/Off and Function Selection
3.2 Auto Power Off
3
Wall Mounting5
Connection6
Setup Help7
Troubleshooting8
Technical Specifications9
Customer Support10
Operation4
4.1 Selecting LINE IN
4.2
4.3
Selecting AUX IN
Selecting Bluetooth
4.4 Selecting OPTICAL IN
3.3 Adjusting The Volume
2.5 Remote Control
2.6 How To Use The Remote Control

334149
Welcome
Thank you for choosing this Goodmans product. We’ve been making electrical products for
the British people for over 90 years. Each of our projects have been carefully designed to be
great at what they do and this one is no exception. We hope you enjoy your new Bluetooth
Soundbar and Subwoofer.
1
Your 55W 2.1 SOUNDBAR
WITH PASSIVE SUBWOOFER
2
Mains Power
Your 55W Soundbar requires a mains supply of 100-240V~, 50/60Hz.
Please ensure that your mains supply is compatible before use.
Disconnect the Power Cord from the mains when not in use.
Position of 55W 2.1 SOUNDBAR WITH PASSIVE SUBWOOFER
Place on a flat, stable surface that is not subject to vibrations. Avoid
the following locations:
•Where it is exposed to direct sunlight
•Where it is close to heat radiating sources
•Where the humidity is high and ventilation is poor
•Where it is dusty
In The Box
Carefully remove your 55W 2.1 soundbar with passive subwoofer from the packaging.
Inside the box you will find:
2.1
•37” Soundbar
•Power Adaptor
•3.5mm Line in Cable
•RCA Cables (RCA to 3.5mm Cable) •Remote Control
If any of these items are missing, contact customer support.
•Wooden Subwoofer Cabinet •Wall Mount Kit
•RCA To RCA Cable

334149
Front View2.2
B
C
HAUX INPUT SOCKET
Press to power soundbar on or off.
I
Connect external audio sources with RCA audio cable.
Rear View2.4
D
E
F
G
Press to select input.
Press to pair the Bluetooth device with soundbar after access to BT mode.
LINE IN SOCKET
OPTICAL INPUT
JDC MAINS INPUT SOCKET
Connect external mains adaptor to
this socket.
SUBWOOFER OUTPUT
K
POWER
SOURCE
Press to decrease the volume.
VOLUME
Press to increase the volume.
VOLUME
PAIR
Side View2.3
ASPEAKER
Connect external audio sources with a 3.5mm audio cable.
A A
B
C
D
E
F
G
IjkH

334149
REMOTE CONTROL2.5
FLAT
L
M
P
N
O
Q
R
S
LPOWER
Press to turn on/off.
MPress to select BLUETOOTH/LINE IN/AUX/OPTICAL mode.
O
In BT mode
Press to Skip/Back/Play/Pause/Stop the track.
N
DSP PRESETS
Press to acess to MUSIC/MOVIE/DIALOG/FLAT mode.
RBASS
Increase or decrease the bass.
S
VOLUME
Increase or decrease the volume settings.
TREBLE
Increase or decrease the treble
Q
PMUTE

334149
HOW TO USE THE REMOTE CONTROL2.6
1. Before using the remote controller, please insert correct type of batteries into
the battery compartment.
2. The remote controller uses 2x1.5V/R03 batteries.
3. Please insert the batteries as indicated below.
A. Remove battery compartment cover.
B. Insert 2 batteries as per the polarities marked inside the battery compartment.
C. Replace the battery cover.
4. If the remote controller does not function, please check the batteries or change
the batteries before consulting technical personnel.

334149
Quick Setup3
Power On/Off and Function Selection
1. This 55W 2.1 soundbar with passive subwooferis supplied with a mains adaptor.
2. I
The unit will be in standby mode and the red LED will be illuminated.
nsert the UK plug into a household power socket, and switch the power on.
3. Press the POWER button to turn the unit on.
4. Press the SOURCE button to select Bluetooth/Line in/Aux/Optical mode.
3.1
To connect the power insert the small end in the rear of the unit.
Auto Power Off
If no audio signal is continuously detected from the selected mode for more than 20 minutes,
the unit will power-off automatically.
3.2
Adjusting the Volume
Press the + button or - button on the side panel of the soundbar to adjust the volume to
a comfortable level.
3.3

334149
Operation
4
4.1
4.2
Selecting LINE IN
1. Press the POWER button on the side panel of the soundbar or press the POWER button
on the remote control and the green LED light will turn on.
Selecting AUX IN
2. Press the Source button on the side panel of the soundbar and select LINE IN mode or
press the LINE button on your remote control.
3. Adjust volume to the desired level.
1. Press the POWER button on the side panel of the soundbar or press the POWER button
on the remote control and the green LED light will turn on.
2. Press the Source button on the side panel of the soundbar and select AUX mode or
press the AUX button on your remote control. The white LED light will illuminate.
3. Adjust volume to the desired level.
4.4 Selecting OPTICAL IN
1. Press the POWER button on the side panel of the soundbar or press the POWER button
on the remote control and the green LED light will turn on.
2. Press the Source button on the side panel of the soundbar and select OPTICAL mode or
press the OPTICAL button on your remote control. The amber LED light will illuminate.
.3 Adjust volume to the desired level.
1. Press the POWER button on the side panel of the soundbar or press the POWER button
on the remote control and the green LED light will turn on.
4.3 Selecting Bluetooth
2. Press the Source button on the side panel of the soundbar and select Bluetooth mode or
press the BLUETOOTH button on your remote control. The blue light will flash quickly.
For instuctions on pairing and connecting Bluetooth devices，refer to your device's
user manual.
3.
Use the controls on your Bluetooth device to select ( GOODMANS SOUNDBAR ) in your
Bluetooth settings to pair. If your device requests a password, enter the “0000” .

334149
Wall Mounting
Fig 1Accessories included
Fig 3Fig 2
5
STUD STUD
WALL
WALL MOUNT
BRACKET
406 mm

334149
Connection6
GCONNECTING THE SUBWOOFER ETTING STARTED:
1
Use the RCA audio cable from the subwoofer to
connect to the Subwoofer Output on the soundbar.
. Connect the 3.5mm jack to the headphone socket on your TV and the other end to AUX in on the
back of the soundbar.
2. Press the POWER Button on the soundbar or remote control , so that the LED is illuminated.
3. Press the AUX button on your remote control, so that the white LED is illuminated.
4. Adjust volume to the desired level.
CONNECT VIA RCA TO 3.5MM JACK CABLE
CONNECT THE OPTICAL CABLE (the optical cable not included)
OPTICAL1. Connect the OPTICAL jack to the headphone socket on your TV and the other end to in
on the
back of the soundbar.
2. Press the POWER Button on the soundbar or remote control , so that the LED is illuminated.
3. Press the OPTICAL button on your remote control, amberso that the LED is illuminated.
4. Adjust volume to the desired level.