GoPro Hero4 Silver User manual

QUICK START GUIDE
Download the User Manual at
gopro.com/support

Congratulations on your new HERO4 Black camera. This Quick Start
Guide will show you the basics of capturing life’s most incredible
moments with your GoPro.
To learn more, download the User Manual at gopro.com/support.
JOIN THE GOPRO MOVEMENT
twitter.com/GoPro
youtube.com/GoProfacebook.com/GoPro
instagram.com/GoPro
/ Hello
When using your GoPro camera as part of your active lifestyle, always be
aware of your surroundings to avoid injury to yourself and others, and to
prevent damage to your camera.
Before using your GoPro camera, please read carefully all
the safety precautions in the Important Product + Safety
Information included with your camera.
To see the complete list of country certifications,
refer to the Important Product + Safety Information
included with your camera.

Shutter/Select Button [ ]
Camera Status Screen
Wireless Status Light (blue)
Camera Status Light (red)
Settings/Tag Button [ ]
Power/Mode Button [ ]
/ The Basics/ Getting Started
STEP 1
Remove the camera from
the housing.
STEP 2
Remove the camera side
door and insert a microSD
card (sold separately).
(Requires at least a Class 10 or
UHS-I microSD card. For a list
of GoPro-tested microSD cards,
visit gopro.com/support.)
STEP 3
Open the battery door and insert
the battery.
STEP 4
Charge the battery using the
included USB cable.
POWERING CAMERA ON AND OFF
To Power On:
Press the Power/Mode button [ ].
To Power Off:
Press and hold the Power/Mode
button [ ] for two seconds.

/ Capturing Video and Photos
Select your camera mode, then press the Shutter/Select button [ ] to
start/stop recording or take a photo.
QUIKCAPTURE
When the camera is off and
QuikCapture is enabled, you can
turn the camera on and immediately
begin capturing video or Time Lapse
photos just by pressing the Shutter/
Select [ ] button. Press once
for video, press and hold for two
seconds for Time Lapse photos.
Press again to stop recording and
power off the camera. You can turn
QuikCapture on/off in Setup mode.
HILIGHT TAG
Press the Settings/Tag button
[ ] to tag key moments while
recording video or playing back
footage on an LCD Touch BacPac.
HiLight Tags help you quickly
find the highlights later for easy
playback, editing and sharing.
*Playback only appears when the camera is connected to a TV or LCD Touch BacPac (sold separately).
/ Selecting Camera Modes
2. If necessary, select a different capture mode:
a. Press the Settings/Tag button [ ] to open the settings menu.
b. Press the Shutter/Select button [ ] repeatedly until you get to
the desired capture mode.
c. Press the Settings/Tag button [ ] to close the settings menu.
1. Press the Power/Mode button [ ] repeatedly to cycle through the
camera modes.
Camera Modes Description
Video Video, Time Lapse Video, Video + Photo,
Video Looping
Photo Single, Night, Continuous
Multi-Shot Burst, Time Lapse, Night Lapse
Playback* Play back content on a TV or LCD
Touch BacPac™
Setup Adjust general camera settings

/ Adjusting Camera Settings
1. Press the Power/Mode button [ ] to cycle to your desired mode.
2. Press the Settings/Tag button [ ] to enter the Settings menu
for that mode.
3. Press the Power/Mode button [ ] to cycle through the options.
4. Press the Shutter/Select button [ ] to select your desired option.
5. Press the Settings/Tag button [ ] to exit the settings menu.
To learn more about settings, download the User Manual at
gopro.com/support
Language
Camera
Reset

SIDE MOUNTING
VERTICAL MOUNTING
/ Mounting Your Camera
SURFBOARD MOUNTING*
*Surfboard mounts are included with HERO4 Black/Surf only.
To learn more about mounting your camera, visit gopro.com/support.
/ Mounting Your Camera
FLAT SURFACE MOUNTING
CURVED SURFACE MOUNTING
Mount your GoPro to helmets, gear and more with the included Curved +
Flat Adhesive Mounts and hardware.
APPLYING + REMOVING ADHESIVE MOUNTS
Apply adhesive mounts to clean, smooth surfaces at room temperature
only, at least 24 hours before use. To remove, heat with a hair dryer then
peel off mount.

/ Housing Backdoors / Swapping Backdoors
Your HERO4 Black camera comes with two backdoors, each designed for
different uses and environments.
STANDARD BACKDOOR
Provides waterproof protection to 131’ (40m).
Use when shooting under water or in wet, damp
or dirty conditions.
SKELETON BACKDOOR
Not waterproof—use in dry, dirt-free environments
only. Enables enhanced audio capture during
low-speed activities.
STEP 1
Open the housing so the backdoor
hangs downward.
STEP 2
Pull down on the backdoor until it
snaps free from the hinge.
STEP 3
Align the new backdoor with
the hinge.
STEP 4
Push up on the backdoor until it
clicks into place.

/ Playing Back Videos and Photos
There are several ways to play back your videos and view your photos.
/ Sharing Videos and Photos
There are a few ways to share your videos and photos.
COMPUTER
Connect the camera to your
computer with the included USB
cable to transfer content for playback.
For help accessing your GoPro
content, download the latest GoPro
soware at gopro.com/getstarted.
SMARTPHONE + TABLET
Use the GoPro App to play back
content on your smartphone
or tablet. For more info, see
GoPro App.
COMPUTER
Connect the camera to your
computer with the included USB
cable to transfer content for sharing.
LCD TOUCH BACPAC™
This removable LCD touch screen
seamlessly attaches to the back
of your GoPro, delivering quick
playback of videos and photos
(sold separately).
TV
See your content on the big screen.
Connect your camera to your TV
with a micro HDMI*, composite or
combo cable (sold separately).
SMARTPHONE + TABLET
Use the GoPro App to share videos
and photos by text, email or on your
social networks. For more info, see
GoPro App.
*For video resolutions above 1080p60 fps, HDMI playback may only be supported at 1080p60 fps.

/ Help and Resources/ GoPro App
CONTROL. VIEW. SHARE.
The GoPro App lets you control your camera remotely using a smartphone
or tablet. See what your camera sees with live preview. View photos and
play back videos, then share your favorites via email, text, Facebook,
Twitter and more.
TO CONNECT TO THE GOPRO APP
1. Download the GoPro App and open it
on your smartphone or tablet.
2. Follow the app’s on-screen
instructions to connect your camera.
(If needed, the default password for your camera
is goprohero.)
For complete pairing instructions,
visit gopro.com/support.
UPDATE YOUR CAMERA
Get the latest features and
best performance.
CREATE A GOPRO ACCOUNT
Enter for a chance to win Video of
the Day, Photo of the Day and more.
DOWNLOAD THE
USER MANUAL
Find detailed info on settings,
modes and more.
Visit gopro.com/getstarted to learn more:
GET THE GOPRO APP +
GOPRO STUDIO
Control your camera remotely. View
and share content. Create videos.
WATCH A TUTORIAL VIDEO
Learn tips + tricks from the pros.
CONTACT CUSTOMER
SUPPORT
Get help and find answers to
frequently asked questions.
130-14664-000 REVA