GoveeLife Smart Humidifier Max User manual

Smart Humidifier Max
User Manual
Model : H7143

Safety Instructions
General Safety
Power Cord & Plug
Introduction
Part Names
Functions & Controls
Indicator Status
Govee Home App
Downloading Govee Home App
Pairing with Govee Home App
Care & Maintenance
Cleaning Your Humidifier
Descaling Your Smart Humidifier
Cleaning the Aroma Pad & Absorption Pad
Replacing the Aroma Pad & Absorption Pad
Storing
Troubleshooting
For Humidifier
For App & Connectivity
Appendix
After-Sales Service
Specifications
Compliance Information
Included in the Box
Getting Started
Filling & Refilling
Essential Oils (Optional)
Contents
01
02
02
07
07
09
10
11
16
19

GoveeLife Smart Humidifier Max
User Manual
General Safety
Power Cord & Plug
Only use the humidifier as described in this manual, and keep it out of reach from children.
To reduce the risk of fire, electric shock, or other injuries, always follow all instructions and
safety guidelines.
Place the humidifier and cord so that it will not be knocked over. Do not place near large
pieces of furniture or in high-traffic areas.
Do not attempt to disassemble the humidifier or its components.
To avoid the risk of electric shock, always unplug the humidifier from power before cleaning
it or detaching the water tank from the base.
Always place the humidifier on a flat, horizontal surface before using.
Do not place the humidifier near heat sources such as stovetops, ovens, or
radiators.
Do not place the humidifier directly on carpets or rugs.
Do not use non-GoveeLife humidifier parts as replacement parts for this product.
Do not cover the nozzle while the humidifier is on, as this may damage the humidifier.
Remove the water tank from the base before moving the humidifier.
Do not immerse the humidifier base, power cord or plug in water.
Not for commercial use. Household use only.
Do not use the humidifier in wet environments. Do not allow water or other liquids inside the
air vent.
If the humidifier will not be in use for an extended period, it should be turned off and
unplugged from power.
Do not use detergents to clean the humidifier. Only use distilled white vinegar.
Do not clean the humidifier immediately after turning it off, especially if it has been diffusing
warm mist. Allow the humidifier to cool down completely before cleaning.
If the humidifier is damaged or is not functioning properly, stop using it and contact Custom-
er Support immediately.
Safety Instructions
READ AND SAVE THESE INSTRUCTIONS
01
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.

Do not handle the power cord or plug with wet hands. Keep the power cord and
plug away from liquids.
This humidifier uses standard US 120V, 60Hz outlets. If using it outside the US, check the
compatibility.
Part Names
Included in the Box
Introduction
Item
Humidifier
Cleaning Brush
Aroma Pad
Absorption Pad
Quick Start Guide
User Manual
Caution
1.Only add essential oils to the aroma pad.
2.Burn Hazard: Let the nozzle, mist tube and base cool first before cleaning or touching.
Quantity
1
1（Built-in）
1（Included） 2（Extra）
1（Included） 2（Extra）
1
1
Silicone Carrier
Nozzle
Top Cover
02
Cleaning Brush
Water Tank
Touch Buttons
Display Screen
Base
Air Inlet
Thermo-hygrometer Sensor (Interior)
Night Light Power Cord
Power Plug

03
Mist Tube
Mist Tube
PTC Heating Module
Absorption Pad
Magnet Ring
Aroma Pad
Aroma Box
Air Outlet
Non-Slip Pad
Water Filter
Float
Mist Channel

04
Functions & Controls
On/Off Button
Touch to turn on/off.
You can access additional features using Govee Home App.
Note:
When the humidifier is powered off, its fan will continue spinning for 15 seconds to clear away any
internal mist to avoid water vapor accumulation that may affect the life of the humidifier.
Follow the in-app instructions to press the power button when pairing with the app.
Mist Level Button
Touch repeatedly to cycle through Low, Medium and High mist levels and Auto Mode.
Auto Mode: In this mode, the humidifier will automatically adjust the mist output so that the
ambient humidity can stay close to the target value.
Note:
In Auto Mode, the humidifier will start misting when the humidity is lower than the target value.
When the Auto Stop switch is enabled in the app and the target humidity value is reached, the
humidifier will stop misting.
More Auto Mode settings can be accessed in the app.
It is recommended to use the humidifier together with Govee Thermo-Hygrometer to bring you a
better experience of constant humidity

Timer Button
Touch repeatedly to cycle through 1-24H. The humidifier will automatically power off once the
countdown of the timer ends.
Long press for 2 seconds to cancel the Timer if necessary.
Target Humidity Button
Touch to cycle through target humidity of 40~80%. Add humidity by 5% with each touch. The
ambient humidity will be maintained close to the target value in Auto Mode.
Night Light Button
Touch to turn the night light on/off.
Recovery Button
Touch and hold these two buttons simultaneously for 5 seconds until all indicators flash once
to restore the humidifier to factory settings if it cannot function well. Then the humidifier will
disconnect from Wi-Fi and Bluetooth and automatically reboot.
Note: More night light settings can be accessed in the app.
Note:
Warm Mist is an independent feature. You will get warm mist if you turn it on and cool mist if you turn it off.
In this mode, you can adjust the mist output by touching the Mist Level Button.
When adjusting the target humidity, the humidifier will enter the Auto Mode automatically.
In Auto Mode, a margin of error of 1%-3% might exist to avoid damage caused by repeatedly
turning the device on and off due to environmental changes.
05
Warm Mist and Lock Button
Touch to turn the Warm Mist on/off. The humidifier will mix the cool and hot mist to form
warm mist.
Touch and hold for 3 seconds to turn the Lock on/off. When the Lock is on, the button does not
respond to any touch, preventing children from accidentally changing any settings.

Memory Function
The humidifier will save its previous settings when powered off (such as mist level, mode, and
Wi-Fi connection). When it is powered back on, the settings will resume.
Note:
After restoring the humidifier to factory settings, go to “My Devices” page on the app to delete this humidifier
first, otherwise it cannot be added to the app again.
06
Indicator Status
Timer is On
Water Tank Pulled Out/Running
Out of Water
Water Detection Exception
Warm Mist is On
Warm Mist Exception
Locked
Auto Mode is On
Mist Level I Solid White
Mist Level II Solid White
Mist Level III Solid White
Auto Mode Solid White
Humidity
Warm Mist Exception Solid White for 5s
Ready for Wi-Fi Connection
Wi-Fi is Connecting
Wi-Fi is Connected
Slowly Flashes White
Quickly Flashes White
Solid White
Solid White
Solid White
Solid White
Flashes White
Solid White
Keeps Flashing Red
Solid White
Solid Red
Indicator Working Status Light Status
Lock Reminder Triple Flashes
Note: Find solutions for feature exceptions in the Troubleshooting section.

Getting Started
07
Remove all packaging, clear tape, and protective foam (including inside the base).
Clean the water tank before using the humidifier for the first time.
Place the humidifier on a hard, flat, and water-resistant surface and at least 12 inches (30cm)
away from any walls.
1.
2.
3.
Filling & Refilling
Note:Please change the water at least once every two days to avoid breeding bacteria.
Pull the silicone carrier and remove the top cover.1.
Direct the mist away from walls, furniture, bedding, other appliances, and electronics.4.
12in/30cm
12in/30cm

08
Note:It is recommended to fill the tank with purified or distilled water instead of tap water
that may result in white dust (dried minerals) on surfaces.
Fill the tank with room-temperature water, not warm or hot water.2.
Replace the water tank cover.3.
Caution
Do not fill past the tank's max water line.
Do not fill water into the mist tube or base.

09
Press to pop out the aroma box from the back of the base.
Add 8 to 10 drops of essential oils on the aroma pad.
1.
2.
Note: Be careful not to spill essential oils out of the aroma box to avoid contaminating the
inside of the product.
Push the aroma box back into the humidifier.3.
Note: For better aromatherapy, always clean the aroma pad before adding new essential oils.
Do not mix essential oils.
Essential Oils (Optional)
Caution
Do not add essential oils to the water tank or base. Only add essential oils to the aroma box.

10
Govee Home App
Downloading Govee Home App
You can access more features using Govee Home App.
To download Govee Home App, scan the QR code or search for “Govee” in the Apple App
Store® (iOS) or Google Play Store (Android).
Method to turn off Bluetooth and Wi-Fi connection: Press and hold the Power Button and Mist Level
Button for 5s to restore the device to factory settings, then go to “My Devices” page on the app to
delete this humidifier first, otherwise it cannot be added to the app again.
You can use Govee Home App to connect your humidifier to Amazon Alexa or Google Assistant. Follow
the in-app instructions to connect to each voice assistant.
Govee Home App is being continually updated and its features do expand.
Note:
Pairing with Govee Home App
Turn on your smartphone's Bluetooth. Connect to your Wi-Fi router's 2.4GHz network. 5GHz
is not supported.
Android users turn on Location Services; IOS users choose Location ->Always On in the
pop-up window while adding devices.
Note:
For IOS users, if you chose Location->Never, it might result in notifications/alert excep-
tions. It is recommended to follow Settings ->Govee Home ->Location ->Always On to obtain
the best experience.
Govee Home WILL NOT collect, use, or share your location in any way.
Open Govee Home App, tap the “+” icon in the top right corner and search for “H7143.”
Tap the device icon and follow the in-app instructions to complete the Bluetooth and Wi-Fi
connection.
1.
2.
3.
4.
Choose “Allow” to the permissions requested when opening Govee Home App for the first time. These
permissions allow the app’s features to function normally and are not used to record personal, private
information.
Due to ongoing updates, Govee Home App may be slightly different than shown in this manual. In case of
any differences, always follow the in-app instructions.
Note:

11
Note: If you've been using the warm mist setting, allow the humidifier to cool before cleaning.
It is recommended to clean the water tank and base every 3 days and when you’re ready to
store it.
Cleaning Your Humidifier
Never immerse the base in water or other liquids.
Do not use detergents to clean the humidifier.
Note:
Unplug the humidifier from power before cleaning.1.
Pull the silicone carrier and clean the top cover.2.
Unplug the nozzle upright.3.
Care & Maintenance
All maintenance should be done on a water-resistant surface, such as a kitchen counter.
Use a tissue or cloth to clean the nozzles regularly.
If not using the humidifier for 1 week or longer, do not leave water inside. Clean and dry
the humidifier instead.
Note:

12
Grab the handle of the water filter and unplug it upright.4.
Take out the water tank and pour away the water left inside.5.
Pull out the mist channel and pour out the water left inside the base.6.

13
Note: Make sure the mist channel and the float are already in place before use. Otherwise,
it will affect the mist output.
Take out the absorption pad and the aroma box. Rinse all parts (except the outside of the
base) with room temperature water.
7.
Rinse the tank and the base chamber with room temperature water.8.
Dry all parts with a cloth. Make sure every part is in place before use or storing.9.
Caution
Do not let water enter the air inlet or outlet as this may damage internal components. If water
does enter the inlet or outlet by accident, place the base in a ventilated place to dry it before
using.

14
To descale the humidifier (remove mineral buildup):
Descaling Your Smart Humidifier
Fill the tank with 3 cups / 710 ml of distilled white vinegar.1.
Put the tank cover on and swirl the vinegar around the tank.2.
Place the tank on the base and let it sit for 15-20 minutes until the vinegar loosens
the scale deposits.
3.

15
Remove the tank and its cover, and pour all the vinegar out.4.
Use a soft cloth and the included cleaning brush to remove scale from all parts.5.
Rinse all parts until the vinegar smell is completely gone.6.

16
Dry all parts with a cloth completely before reassembling or storing the humidifier.7.
Plug the humidifier into a working outlet and turn it on.
Add purified or distilled water to the water tank.
Humidifier does not power
on/off normally.
Little or no mist comes out. Clean the atomizer plate to avoid white dust from
accumulating on it.
Problem Possible Solution
Fill up the water tank.
Choose a higher mist level.
There may be too much water in the base chamber.
Empty the base chamber, refill the water tank (not the
base chamber), and place the water tank properly onto
the base.
Troubleshooting
Cleaning the Aroma Pad & Absorption Pad
Pull out the aroma box and remove the aroma pad.
Remove the mist channel then remove the absorption pad from top of the heating element.
Rinse the pads under warm running water.
Dry the pads with a clean cloth and place pads back.
1.
2.
3.
4.
Replacing the Aroma Pad & Absorption Pad
If the aroma pad or absorption pad is stiff even after cleaning, then it needs to be replaced.
Extra pads are included with the humidifier.
To maintain the performance of your humidifier, only use official GoveeLife aroma pads and
absorption pads. For more information, contact Customer Support.
Storing
For Humidifier
Follow the cleaning instructions and dry all parts completely before storing the humidifier in a
cool, dry place.
The troubleshooting section below is for solving frequently asked questions for the humidifier
unit. If your problem persists, please contact customer support.
Caution
Align the edges of the absorption pad with that of the heating module. Gently press each side
of the pad to make sure it is well tucked into the concave.

17
Little or no mist comes out. Clean the humidifier. Make sure the nozzles are not
blocked or clogged.
If the water tank or base was washed with detergent,
rinse thoroughly with clean water to remove any
detergent.
Problem Possible Solution
Humidifier produces an
unusual smell.
If there is any essential oils in the aroma pad, use clean
water to rinse the pad and dry it.
Empty the base chamber. Refill the water tank (not the
base chamber) and place the water tank properly onto
the base.
When using the warm mist function, the heating
element may make a gurgling noise if the water level is
low. Add more water to the water tank.
The humidifier may be malfunctioning. Stop using the
humidifier and contact Customer Support.
Humidifier makes a loud or
unusual noise.
Make sure the water tank is properly in place.
White dust appears around
the humidifier.
It is recommended to use purified or distilled water to
fill the humidifier. Avoid using water with high mineral
content, such as tap water.
Water leaks from the
humidifier.
Do not shake the humidifier.
The mist is not warm enough
even though the Warm Mist
Mode is on.
Allow the humidifier to heat up for 2~3minutes to
produce warm mist.It takes longer when the environ-
ment is cold.
The mist is warm on the
cool mist setting.
The heating element may still be warm after being used
for warm mist. Allow the heating element to cool for at
least 30 minutes.
Make sure to place the humidifier on a flat, level
surface.
Mist leaks from the base. Make sure the water tank is placed properly.
Clean the humidifier.
If the humidifier is new, unplug and rinse all parts, then
place in a cool, dry place for 12 hours.
Clean the heating element.
Check the water tank for leaks. If there are leaks,
contact Govee Customer Support.
Make sure the humidifier is on a level surface.
Replace or clean the absorption pad.

18
Mold grows inside the
humidifier.
Clean the water tank and base chamber regularly.
Essential oil has little or no
smell.
Add more essential oil. For best results, use pure
essential oil.
Mist leaks from the nozzle. Place the nozzle properly on the mist tube.
The humidity display is not
accurate.
Moisture may have built up inside the humidity sensor.
Turn off the humidifier, remove the aroma box, and
allow the sensor to air dry.
The LED screen displays “--” Thermo-Hygrometer sensor(Interior) exception. Please
contact Customer Support or use the humidifier after
binding with Govee Thermo-Hygrometer.
The humidity level isn't
changing in my room.
Choose a higher mist level or turn on the Warm Mist
Mode.
Depending on your environment, the humidifier may
take longer to humidify your air.
The room may be larger than the humidifier's effective
range. If the room is larger than 495ft²/46m², the
humidifier will not be as effective.
If the humidifier is placed within 12 inches / 30 cm of a
wall or in a corner, the humidity sensor cannot provide
a proper reading for the relative humidity in the room.
The humidity sensor will give an improper reading if it
is exposed to dust. Avoid using the humidifier in dusty
rooms. Avoid using tap water in the humidifier as this
can increase dust in the air.
keeps flashing. Clean the water tank and the base chamber. Refill the
water tank and place the water tank properly onto the
base.
Problem Possible Solution
The LED screen display "ER"
when touching buttons.
Product exception. Please contact Customer Support.
flashes when turning on
the Warm Mist Mode
Heating exception. Please contact Customer Support.