GPX PF118R User manual

PF118R/PF118S - Digital Picture Frame Ornament
In the Box
PF118•
USB Cable•
File Conversion / Compression Software CD•
Features
Digital Photo Frame displays photos and pictures
JPEG/BMP/GIF Picture File Format•
Delete Function•
1.5” Color Display
128 x 128 Pixel, 65K Color•
Supports USB Sync
Supports Multiple Picture Download at one time from PC through•
Conversion Program
Digital Clock and Calendar
Auto Power Off Interval Selection (None, 3, 5 , 10, 15, 30, 45, 60 Minutes)
Auto On/Off Times•
Installed Flash Memory
Can Store up to 180 pictures•
DC-Powered:
Uses 2 x “AAA” Batteries, (not included)•
Powering the Unit
The unit is powered by loading two AAA batteries (not included)
into the battery compartment.
Please note, when powered on, the unit can last approximately 6
hours off of two AAA batteries.
Automatic Power Off
The Auto Power Off feature can be set from the unit’s menu.
With the unit powered on, press theStep 1: Menu Button.
Highlight “Auto Power Off” using theStep 2: Directional Buttons,
and press the Menu Button to select the highlighted option.
Use theStep 3: Directional Buttons to highlight on of the following
options:
3, 5, 10, 15, 30, 45, or 60 minutes, or Off.
The default setting for the Auto Power Off feature is 30•
minutes.
The unit will power off after the selected amount of time hasStep 4:
expired.
Automatic On/Off
With the unit powered on, press theStep 1: Menu Button.
Press theStep 2: Directional Buttons to highlight “Auto On/Off”,
and press the Menu Button.
Press theStep 3: Directional Buttons to highlight “Auto On” or
“Auto Off”.
Auto On - Select to enable the automatic on/off feature and set
the time.
Auto Off - Select to disable the automatic on/off feature.
Press theStep 4: Menu Button.
After selecting “Auto On”, use theStep 5: Directional Buttons to set
the “On” hour.
Press theStep 6: Menu Button.
Use theStep 7: Directional Buttons to set the “On” minute.
Press theStep 8: Menu Button.
Use theStep 9: Directional Buttons to set the “Off” hour.
Press theStep 10: Menu Button.
Use theStep 11: Directional Buttons to set the “Off” minute.
Press theStep 12: Menu Button.
© 2008 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property of their respective owners.
Service Information
Address: 2116 Carr Street, St. Louis MO, 63106
Phone: [phone]
Fax: [phone]
Email: [email protected]
Website: www.gpx.com
Version: v. 073108
Parts Information
Address: 2116 Carr Street, St. Louis MO, 63106
Phone: [phone]
Fax: [phone]
Email: [email protected]
To download this Instruction Manual in English, Spanish, or French visit the Support
section at www.gpx.com.
Para descargar este manual de instrucción en inglés, español, o francés visite la sec-
ción de la ayuda en www.gpx.com.
Pour télécharger ce manuel d’instruction en anglais, espagnol, ou le Français visitez
la section de soutien à www.gpx.com.
Warnings and Precautions
WARNING:Topreventreorshockhazards,donotexposethisunittorainormoisture.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
WARNING: Danger of explosion if the unit’s batteries are incorrectly installed. Replace only
with the same or equivalent battery.
WARNING:Changesormodicationstothisunitnotexpresslyapprovedbytheparty
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentandreceiver.
•Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
This symbol, located on back or bottom of the
unit, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s
enclosurethatmaybeofsufcientmagnitudeto
constitute a risk of electric shock to persons.
This symbol, located on back or bottom of the unit, is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
CAUTION:TOPREVENTELECTRICSHOCK,MATCHWIDEBLADEOFPLUGTO
WIDE SLOT, FULLY INSERT.
To reduce the risk of electric shock, do not remove cover (or back). There are no user-
serviceablepartsinside.Pleasereferanyservicingtoqualiedservicepersonnel.

Setting the Date and Time
With the unit powered on, press theStep 1: Menu Button.
Press theStep 2: Directional Buttons to adjust the year, and
press the Menu Button to set the year.
Press theStep 3: Directional Buttons to adjust the month,
and press the Menu Button to set the month.
Press theStep 4: Directional Buttons to adjust the day, and
press the Menu Button to set the day.
Press theStep 5: Directional Buttons to adjust the hour, and
press the Menu Button to set the hour.
Press theStep 6: Directional Buttons to adjust the minute,
and press the Menu Button to set the minute.
Press theStep 7: Directional Buttons to adjust the second,
and press the Menu Button to set the second.
The time and date are now set.Step 8:
To view the time and date, select the “Clock Disp”•
option in the menu.
Loading Photos onto the Unit
With the unit powered off, connect the unit to aStep 1:
computer using the included USB cable.
Use theStep 2: Directional Buttons to select “USB
Download”.
USB Play will allow you to browse and play photo
content while the unit is powered by the USB
connection.
USB Download will allow you to download photos
directly onto the unit.
Press theStep 3: Menu Button.
A window will pop up on the connected PC computerStep 4:
asking “What do you want Windows to do?”.
Double Click “Run the Program”.Step 5:
In this program, photos can be added or deleted to orStep 6:
from the unit.
Click on the “Select Files” button on the top left toStep 7:
ndaphototoload.
After the desired image is selected, highlight it in theStep 8:
“File List” in the program, and crop it to size using the
selection tool in the “Image Editor”.
After the red box is placed, click the blue “Add”Step 9:
arrow, to add the photo to the unit.
Adjusting the Brightness
With the unit powered on, press theStep 1: Menu Button.
Use theStep 2: Directional Buttons to select the
“Brightness” feature, and press the Menu Button.
Press theStep 3: Directional Buttons to adjust the brightness
of the unit.
When the desired level of brightness is reached, pressStep 4:
the Menu Button.
Deleting an Image
With the unit powered on, press theStep 1: Directional
Buttons to select a photo you wish to delete.
Press theStep 2: Menu Button.
Highlight “Delete” using theStep 3: Directional Buttons,
and press the Menu Button to select the highlighted
option.
The current photo will be deleted from the unit’sStep 4:
memory.
Adjusting the Display Mode
With the unit powered on, press theStep 1: Menu Button.
Highlight “Display Mode” using theStep 2: Directional
Buttons, and press the Menu Button to select the
highlighted option.
Select one of the following options using theStep 3:
Directional Buttons:
Auto Slide - A slideshow of photos will automatically
play when the unit is powered on.
Manual Slide - The Directional Buttons must be
pressed in order to cycle through loaded photos.
Press theStep 4: Menu Button to select “Auto Slide” or
“Manual Slide”.
ControlDenitions Locations of Controls
Mini USB Connection1.
Use the Mini USB Connection to connect the unit to a computer.
Menu Button2.
Press the Menu Button to access the unit’s menu.
Power Switch3.
Adjust the Power Switch to turn the unit off or on.
Hook Connection4.
Use the Hook Connection to connect an ornament hook to the unit.
Battery Compartment (Requires 2 AAA Batteries, not included)5.
Directional Buttons6.
Use the Directional Buttons to navigate through a slideshow of photos, or
through the unit’s menu.
LCD Display7.
The LCD Display displays photos, the time and date, and menu information.
1
4
3
2
6
7
3
4
5