
5. Safe use
The product is designed in order to prevent and avoid damages and accidents. It is however still very important that
the operator is well instructed in how to install and operate the product. In the following, Washbasin Bracket means
the bracket and the fitted accessories, such as washbasin, possible mirror and lighting.
Only use the Washbasin Bracket for its intended purpose.
The operation and use must be made in such way that there is no risk for damages on persons and property.
The Washbasin Bracket may only be operated by persons who have read and understood these instructions,
and are authorized to use it.
Be aware of that you as an operator are responsible for that nobody is damaged.
The Washbasin Bracket and the work area must be in proper condition. The Washbasin Bracket must not be
used if any fault has appeared which influences the functions or the operation safety. It shall also not be
used if it has been repaired, altered or adjusted without permission of a responsible person.
Make sure that the Washbasin Bracket is installed on a firm, flat and absolutely vertical wall with sufficient
mounting details, enough for the total weight incl. the washbasin, its content, mirror and objects on it.
Note the jamming risk between the Washbasin Bracket and adjacent cabinets and benches when height
adjustment is done.
Only stable and securely loaded items may be handled.
Alterations of the Washbasin Bracket that influence the operational safety or the functions are not allowed.
Decals and markings must not be removed or made illegible.
Do not overload the Washbasin Bracket and make sure that the load distribution is correct.
It is absolutely forbidden for persons to stay on the washbasin or to use the lift for lifting persons. It is also
not allowed to use the lift as a support when a person rises up.
The Washbasin Bracket shall regularly, once a year, be inspected in order to prevent accidents.
Applicable Building and Safe use Regulations must be complied with.
During inspections, service and repair work there shall be no load on the Washbasin Bracket.
Competent persons only must carry out installation, service and repair works.
Only Granberg original spare parts shall be used when replacing any parts. Our warranty commitment can
otherwise be invalidated.
6. Load distribution and side forces
Basic loading requirements:
100 % of the rated load distributed over the entire washbasin surface, with the centre of gravity at the
washbasin top.
Horizontal forces are not allowed.
Horizontal forces can appear, for example, when pressing onto the Washbasin. It is difficult to estimate the size of
the actual horizontal force, so utmost care must always be taken. Further to the incorporated safety arrangements
additional can safety actions may be required on or at the Washbasin lift. Discuss suitable actions with your
Granberg representative or with the health and safety inspection. We recommend that a Risk assessment in
accordance with the Machinery Directive shall be made for the actual working conditions. If the owner fits
accessories, contact Granberg to get approval for the loading conditions.
7. Instructions for recycling
The machine is manufactured from re-usable materials or from materials that can be recycled.
Powered by TCPDF (www.tcpdf.org)
Granberg Interior AB - Box 6112 - 600 06 Norrköping - SWEDEN