Sanipex BAGNO DESIGN BRISTOL BDM-BIS-303L Series User manual

BDM-BIS-303L-XX
BRISTOL 3 HOLE BASIN MIXER WITHOUT WASTE
www.sanipexgroup.com

IMPORTANT PLEASE READ
 B 
 

 






 L  C 



 x 
           
           
 



     








 









1 2
Assemble the article according to pictures:
-Drill the top according to the dimensions in figure
1
-Insert the uprights in the holes and fix them with
the kits supplied (figure 2) according to the
dimensions in figure 3
-Screw the caps making sure that the o-rings are
underneath the caps (figure 4)
-Screw flexible pipes and rod in the spout base, and
position the gasket (figure 5)
-Insert the assembly in the hole and fix it with the
fixing kit (figure 6)
-Connect the hoses to the uprights and connect
the hot and cold water supplies (figure 7).

3 4
5 6

Note:

Note:

INM-BIS-303L-XX-06-22
www.sanipexgroup.com