GREENHURST Huntingdon User manual

Item code 4112
Huntingdon Arch Bench and Cushion
Customer notes:
Please make sure you have all the parts to assemble this item before commencing this
assembly.
Please make sure that you retain all the packaging until the item is assembled and you are
happy.
We will only accept a return of this product if it is repacked in the original packaging.
Care and Maintenance.
Periodically check all fixings to ensure that they remain secure. Prolonged exposure to the
elements will inevitably lead to weathering of the metal parts. Original or alternative colours
can be achieved by the appropriate application of outdoor paint that is suitable for metal.
During assembly please take care not to over-tighten any fittings, as this may damage the
product.
Parts list:

Step 1:
Take one Part B and attach to one Part C in each of the three
places as shown in the diagram.
When this complete repeat with the second Part B.
Step 2:
Lower the Completed arch from Step 1 on to one side of
Part A.
Line up the holes in the arch to side A, loosely fix together
using H1 Bolts.
Repeat with the second Part A
Then take one Part D to fix across each of Part A using H3
bolts to secure in place
Step 3:
To affix the seat locate Part E into One
side Part A securing with H3 bolts ,
repeat using the other Part A.

Step 4:
To affix the back of the bench Lower Part F
on the fixed Part E and loosely fix using H2
bolts,
Then fix to the frame (Part A) using H3
Bolts.
Step 5:
To secure the arch with bench to
soft ground, take two Part Y’s and
place through the location holes at
the bottom of both Part A’s and
firmly press into the ground.
Step 6:
Once you are happy that the Arch with Bench is put together as per the
instructions tighten all bolts and tie on the cushions.
Should you require further details or assistance, please contact our customer
care line on 01562 753040