Groov-e GV-PS923 User manual

PORTABLE BLUETOOTH KARAOKE BOOMBOX
1. WARNING：Please refer the information on exterior bottom enclosure for electrical and safety
information before installing or operating the apparatus.
2. WARNING：To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
3. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat
such as sunshine, fire or the like.
4. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain
readily operable.
5. Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam of laser.
6. Correct Disposal of this product. This marking indicates that this product should not be disposed
with other household wastes throughout the EU.
7. No naked flame sources, such as lighted candles, should be placed on the apparatus.
8. Attention should be drawn to environmental aspects of battery disposal.
9. Use of the apparatus in moderate climates.
10. The rating and marking information are located at the bottom of the unit.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
CAUTION
moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on apparatus.
Important Safety Instructions
TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
This symbol indicates that this product incorporates double insulation
between hazardous mains voltage and user accessible parts.
The lightning with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
magnitude to constitute a risk of electric shock to persons.
WARNING: DO NOT INGEST BATTERY,
CHEMICAL BURN HAZARD.
CLASS 1 LASER PRODUCT LABEL -
This label is attached to the place as
illustrated to inform that the
apparatus contains a laser component.
This label is
CLASS 1 LASER PRODUCT
KLASS 1 LASER APPARAT
LUOKEN 1 LAISERLAITE
KLASSE 1 LASER PRODUKT
1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated.
2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference.
3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating instructions should be followed.
5. WATER AND MOISTURE - The appliance should not be used near water, for example, near a bathtub, washbowl,
6. VENTILATION - The appliance should be situated so that its location or position does not interfere with its proper
ventilation. Do not place on bed, sofa, rug or similar surface that may block the ventilation openings, in a built-in
installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
7. HEAT - The appliance should be situated away from heat sources such as radiators, stoves, or other appliances
(including amplifiers) that produce heat.
8. POWER SOURCE - The appliance should be connected to power supply only of the type described in the
operating instructions or as marked on the appliance.
9. POWER CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them.
10. OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are not spilled into
the enclosure through openings.
11. ESD WARNING - The display does not function properly or no reaction to operation of any the control may due
to the electrostatic discharge. Switch off and unplug the set. Reconnect after a few seconds.
12. DAMAGE REQUIRING SERVICE - The appliance should be serviced by qualified service personnel when:
a. The power-supply cord or plug has been damaged.
b. Objects have fallen into, or liquid has been spilled into the appliance enclosure.
c. The appliance has been exposed to rain.
d. The appliance has been dropped, or the enclosure damaged.
e. The appliance does not appear to operate normally.
13. SERVICING - The user should not attempt to service the appliance beyond that described in the user operating
instructions. All other servicing should be referred to qualified service personnel.
Notes:
a. Dirty or scratched CD may cause a skipping problem. Clean or replace the CD.
b. If an error display or malfunction occurs, disconncet the AC cord and remove all the batteries. Then turn the power
back on.
BEFORE OPERATION
Notes: CONCERNING COMPACT DISCS.
Since dirty, damaged or warped discs may damage the appliance, care should be taken of the followings items:
a. Usable compact discs. Use only compact disc with the mark shown below.
b. CD compact disc only with digital audio signals.
Kitchen sink, landrytub, swimming pool or in a wet basement
GV-PS923
User Guide

FEATURES
•CD player: CD, CD-R/RW
•Karaoke: CD+G
•2 digit red LED display
•Automatic voice control
•Echo control
•Microphone volume control
•Top-load disc player
•Repeat 1 or ALL play
•LED light e ect
•Composite video output
•2 microphone inputs
•RCA stereo audio outputs
•Analog volume control
•Built-in speaker
•Carry handle
•AC power: requires AC power cable (included)
•DC battery power: requires 6 C sized
batteries (not included)
INCLUDES
•Microphone x 2
•RCA audio/video cable x 1 set
•AC power cable x 1
•Bluetooth
•CD+G Disc x 1
LIGHTS
ON / OFF
REP. PROG.
POWER
PROGRAMREPEAT
MIC VOL.
MIN MAX
ECHO
MIN MAX
VOLUME
MIN MAX
AVC
MIN MAX
OPEN
PLAY/
PAUSE
1. Display
2. Play/Pause/Bluetooth logo
*Press & Hold seconds to change CD+G or Bluetooth model
*Press to play or pause a loaded disc
3. Stop/Pair
*Press to stop a disc during play
*Press & Hold seconds to find and fair the Bluetooth source
4. Skip/Search
*Press to skip between tracks on a loaded disc.
*Press & hold to fast -forward or fast-rewind the current track on a loaded CD
*Note: Fast forward and rewind will not work with CD+G
5. Power
*Press to turn the unit on or off
6. Program
*Press to program a loaded disc to play tracks in a specified order
7. Master Volume
*Turn to adjust the master volume
8. AVC
*Turn to adjust the automatic voice control
9. Lights On/Off
*Press to turn the lights on or off
10. Microphone Volume
*Turn to adjust the volume from the microphones
11. Echo
*Turn to adjust the echo
12. Repeat
*Press repeatedly to set the current track
13. CD door
or enre album to repeat
13
1
11
10
9
12
3
4
2
5
7
6
8
MIC 1 MIC 2
14. Mic Inputs 1 & 2
15. Main Speaker (Front)
15
14

CONNECTING DEVICES
CD & CD+G
AC IN ~
VIDEO
AUDIO OUT
RL
RCA Audio Output
Requires an RCA audio cable (included).
1. Connect RCA audio cables to the RCA Audio Output on the karaoke
machine and an audio input on an external stereo system.
2. Adjust the external stereo system’s source to the input used in step one.
3. Audio played through the karaoke machine will now be heard through the
connected stereo system.
Composite Video Output
Requires an RCA video cable (included).
1. Connect an RCA video cable to the RCA Video Output on the karaoke
machine and a video
input on a television.
2. Adjust the television source to the input used in step one.
3. Content played through the karaoke machine will now be seen on the
connected television.
Loading a Disc
Note: This unit is not compatible with MP3 CDs.
1. Press the Power button to power the unit on.
2. Press Open on the CD door to open it.
3. Load a CD, CD-R/RW, or CD+G disc into the karaoke machine, label side
facing up.
4. Close the CD door.
Automatic Voice Control
The Auto Vocal (Automatic Voice Control) dial adjusts the volume of the unit to
compensate for varying levels of volume from the microphone. Turn the dial to
adjust the degree to which the Automatic Voice Control compensates for variations
in volume.
To manually adjust voice control use the Echo knob on the front of the unit.
Playing a Loaded Disc
1. Plug the included microphone into the Mic 1 or Mic 2 inputs.
2. Press the Play/Pause button to begin playing the loaded disc.
Programming a Loaded Disc
1. Press the Stop button to stop the loaded disc.
2. Press the Program button.
3. Press the Skip/Search buttons to select a track from the loaded disc.
4. Press the Program button to add the selected track to the program.
5. Repeat steps 4 and 5 to program up to 20 tracks to play in a order.
6. Press the Stop button to cancel a program.
POWER
OPEN OPEN
Power
To power the karaoke machine, plug the AC power cord into the AC Power Input on the rear of the unit and a standard power outlet. For battery power, this unit requires
6 C sized batteries (not included).
To Audio/Video Inputs
on external system
AC IN ~
VIDEO
AUDIO OUT
RL
to AC INto a wall outlet
BLUETOOTH
If the unit has never been paired with a Bluetooth
device before, you need to follow the pairing instructions
below to link the GV-PS923 with your Bluetooth device
1. Turn the power on
2. Press & Hold Play/Pause/Bluetooth Logo Button seconds to Bluetooth
model. Bluetooth indicator lit.
3. Press & Hold the Stop/Pair button for 4-5 seconds. Then the Bluetooth Indicator is
flashing, the unit will goes into pairing/discoverable mode.
4. Turn on the Bluetooth function of your Bluetooth device and enable the search or scan
function to find the unit.
5. Select “ GV-PS923 ” from the device list when it appears on your device screen.
if required,enter the pass code“ 0000” to pair (link) the unit with your device.
6. After successfully pairing (linking) the Bluetooth enable device the Bluetooth indicator
steadily and a short beep will be heard.
Note: if you can’t pair the unit with your Bluetooth enabled device,
the power of your unit to solve the problem.
you can try to turn off & on
7.
Can be controlled by the Bluetooth device or use the Play/Pause, Stop, forward/remind
button on unit (*Fast forward/remind will not work with Bluetooth by unit button)

E
nvironmental Protection
W
aste Electrical products should not be disposed of with household waste.
P
lease recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice
U
nit J, Braintree Industrial Estate
B
raintree Road, Ruislip
M
iddlesex, HA4 0EJ
www.groov-e.co.uk
E
NERGY SAVING
F
or Energy saving, system will return to the standby mode automa cally if unit have
stopped opera ng in CD/CDG or BT modes for 10 minutes approximately.