Grundfos IO 241 User manual

IO 241
IO module
Installation and operating instructions
ON
2
1
IO 241 IO module
Installation and operating instructions
Other languages
http://net.grundfos.com/qr/i/99381581
GRUNDFOS INSTRUCTIONS


IO 241
English (GB)
Installation and operating instructions ..........................................................5
Български (BG)
Упътване за монтаж и експлоатация.........................................................11
Čeština (CZ)
Montážní a provozní návod .................................................................17
Deutsch (DE)
Montage- und Betriebsanleitung .............................................................23
Dansk (DK)
Monterings- og driftsinstruktion ..............................................................29
Eesti (EE)
Paigaldus- ja kasutusjuhend ................................................................34
Español (ES)
Instrucciones de instalación y funcionamiento ...................................................40
Suomi (FI)
Asennus- ja käyttöohjeet ...................................................................46
Français (FR)
Notice d'installation et de fonctionnement ......................................................52
Ελληνικά (GR)
Οδηγίες εγκατάστασης και λειτουργίας.........................................................58
Hrvatski (HR)
Montažne i pogonske upute .................................................................64
Magyar (HU)
Telepítési és üzemeltetési utasítás............................................................70
Italiano (IT)
Istruzioni di installazione e funzionamento ......................................................76
Lietuviškai (LT)
Įrengimo ir naudojimo instrukcija .............................................................82
Latviešu (LV)
Uzstādīšanas un ekspluatācijas instrukcija .....................................................89
Nederlands (NL)
Installatie- en bedieningsinstructies ...........................................................95
Polski (PL)
Instrukcja montażu i eksploatacji ............................................................101
Português (PT)
Instruções de instalação e funcionamento .....................................................107
Română (RO)
Instrucţiuni de instalare şi utilizare ...........................................................113
Srpski (RS)
Uputstvo za instalaciju i rad ................................................................119
Русский (RU)
Паспорт, Руководство по монтажу и эксплуатации.............................................125
Svenska (SE)
Monterings- och driftsinstruktion.............................................................132
Slovensko (SI)
Navodila za montažo in obratovanje .........................................................139
3
Table of contents

Türkçe (TR)
Montaj ve kullanım kılavuzu ................................................................145
Українська (UA)
Інструкції з монтажу та експлуатації ........................................................151
中文 (CN)
安装和使用说明书 .......................................................................157
(AR) ةيبرعلا
......................................................................162
4IO 241
Table of contents

English (GB) Installation and operating instructions
Original installation and operating instructions
Table of contents
1. General information ........................5
1.1 Hazard statements..........................5
1.2 Notes ..................................5
2. Installing the product .......................5
2.1 Location ................................5
2.2 Mechanical installation .......................5
2.3 Electrical connection.........................6
3. Product introduction........................7
3.1 Product description .........................7
3.2 Intended use, IO 241 ........................7
3.3 Terminals ...............................8
3.4 Identification..............................8
3.5 GENIbus ................................8
4. Servicing the product .......................8
4.1 Replacing the IO module ......................8
5. Technical data ...........................10
5.1 Electrical data............................10
5.2 Mechanical data ..........................10
5.3 Temperature.............................10
5.4 Environmental data ........................10
6. Disposing of the product ....................10
1. General information
Read this document before you install the product. Instal-
lation and operation must comply with local regulations
and accepted codes of good practice
1.1 Hazard statements
The symbols and hazard statements below may appear in Grundfos
installation and operating instructions, safety instructions and
service instructions.
DANGER
Indicates a hazardous situation which, if not avoided, will
result in death or serious personal injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious personal injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate personal injury.
The hazard statements are structured in the following way:
SIGNAL WORD
Description of the hazard
Consequence of ignoring the warning
• Action to avoid the hazard.
1.2 Notes
The symbols and notes below may appear in Grundfos installation
and operating instructions, safety instructions and service
instructions.
Observe these instructions for explosion-proof products.
A blue or grey circle with a white graphical symbol indi-
cates that an action must be taken.
A red or grey circle with a diagonal bar, possibly with a
black graphical symbol, indicates that an action must not
be taken or must be stopped.
If these instructions are not observed, it may result in mal-
function or damage to the equipment.
Tips and advice that make the work easier.
2. Installing the product
2.1 Location
The product is intended for installation in a control panel.
2.2 Mechanical installation
2.2.1 Mounting the module
The product is prepared for horizontal mounting on a 35 mm DIN
rail (EN 50022). Recommended height: 7.5 mm.
Module dimensions and required minimum clearance above and
below the module are shown on the drawing.
24 V
EXT
24 V
EXT
GND
CIO 4
GND
CIO 3
GND
CIO 2
GND
CIO 1
GND
DI 2
GND
DI 1
GND
DIO 2
GND
DIO 1
REL 2O
REL 2
REL 2C
REL 1O
REL 1
REL 1C
IO 241
GENIGENI
Max. 2A Max. 2A
24 V
GND
124
115.4
56
6262
Max. 2A Max. 2A
24 V
GND
REL 4C
GND
DI 4
GND
GND
GND
MPF2
MPF1
GND
DI 3
DI 2
DI 1
GND
24 V
EXT
ADI
REL 3C
PTC 2B
PTC 2A
PTC 1A
REL 2
COM
REL 1
L1
L2
L3
N
PTC 1B
CT 2B
CT 2A
CT 1A
CT 1B
REL 4O
REL 3O
REL 3
REL 4
GENI
480Y / 277V AC
IO 242
10mm
20mm
124 (4.88")
115.4 (4.54")56 (2.2")
62 (2.4")62 (2.4")
10 (0.39")
20 (0.79")
TM072343
Dimensions for IO 241
1. Fit the module by hooking the top on the DIN rail (1) and
pressing the bottom against the rail (2).
1
2
TM072342
2. Connect the cables.
2.2.2 EMC-correct installation
The panel usually contains a control unit, a module, contactors and
other power equipment. Other Grundfos modules may also be fitted
into the panel.
To ensure faultless operation, it is very important to install the
electronic modules in an EMC-correct way.
5
English (GB)

2.2.2.1 How to install the product in an EMC-correct way
• Use shielded cables for external GENIbus. Connect the shield to
the cable clamp.
TM075468
• Connect the shield to the earth terminal inside the control
cabinet.
• Do not twist shield ends, as this will destroy the shield effect at
high frequencies.
• Ensure that the DIN rail has a good connection to functional
earth.
The module has been designed to ensure a good electrical
contact to the DIN rail.
2.3 Electrical connection
2.3.1 Connecting the power supply
WARNING
Electric shock
Death or serious personal injury
‐Switch off the power supply before making any electri-
cal connections.
‐Make sure that the power supply cannot be switched
on accidentally.
Changes or modifications not expressly approved by
Grundfos may void the user's authority to operate the
equipment.
1. Check that the supply voltage corresponds with the needed 24
VDC, and ensure that the polarity is connected correctly
according to the label on the product itself.
2. Connect the power cables and pump cables according to the
relevant electrical diagram.
3. Tighten the terminal screws to 0.5 Nm.
TM070570
Connecting a wire to a terminal with spring clamps
2.3.2 Setting the termination resistor
The GENIbus termination resistor DIP switch SW1 has two bits
switches, SW1-1 and SW1-2.
SW1-2 is used for cutting the terminal impedance in and out.
1 2
123 4
ON DIP ON
12
ON
SW1
TM082367
1. Set the switches according to the table.
Status SW1-1 SW1-2
Cut-in - ON
Cut-out - OFF
Maximum cable length
bit/s Terminated cable
m [ft]
Unterminated cable
m [ft]
1200-9600 1200 [4000] 1200 [4000]
19200 1200 [4000] 500 [1700]
38400 1200 [4000] 250 [800]
2.3.3 Setting the address switches
If you connect more than one IO 241 module in the system, you
must set the SW2 address switch correctly. SW2 has four bits
switches, SW2-1, SW2-2, SW2-3 and SW2-4.
Slave address settings
SW2-1 SW2-2 SW2-3 SW2-4 Slave ad-
dress
OFF OFF OFF OFF 90, default
ON OFF OFF OFF 91
OFF ON OFF OFF 92
ON ON OFF OFF 93
OFF OFF ON OFF 94
ON OFF ON OFF 95
OFF ON ON OFF 96
ON ON ON OFF 97
OFF OFF OFF ON 98
ON OFF OFF ON 99
OFF ON OFF ON 100
ON ON OFF ON 101
OFF OFF ON ON 102
ON OFF ON ON 103
OFF ON ON ON 104
ON ON ON ON 105
6
English (GB)

GND
GND
GND
GND
DI 2
CIO 1
CIO 2
DIO 1
DIO 2
CIO 3
CIO 4
GND
GND
GND
GND
24 V
EXT
24 V
EXT
DI 1
IO 241
24 V
GND
GENI GENI
REL 1C
REL 2C
REL 1O
REL 2O
REL 2
REL 1
Max. 2A Max. 2A
21
4321
4321
ON DIP
ON DIP
SW2
ON
SW1
21
TM075096
3. Product introduction
3.1 Product description
The IO 241 module is an optional module for gaining extra input
and output signals. It can be connected to the Grundfos IO 242
pump module and Grundfos control unit CU 241. Future modules
and controllers may be supported.
3.2 Intended use, IO 241
The product is only intended for use with Grundfos control unit CU
24X and pump module IO 242. It provides analog and digital input
signals for Grundfos CU 24X. It also provides digital outputs used
for external switch gear.
The product is only intended for use in control panels.
The product must not be exposed to aggressive solvents or oil-
containing liquids.
7
English (GB)

3.3 Terminals
2 5
6
7
8
9
1011
12
13141516171819202122232425
26
27
28
GND
GND
GND
GND
DI 2
CIO 1
CIO 2
DIO 1
DIO 2
CIO 3
CIO 4
GND
GND
GND
GND
24 V
EXT
24 V
EXT
DI 1
IO 241
24 V
GND
GENI GENI
REL 1C
REL 2C
REL 1O
REL 2O
REL 2
REL 1
Max. 2A Max. 2A
134
1 2
123 4
ON DIP ON
TM072137
Pos. Description
1 Address switches for IO module.
2 GENIbus, for internal use between the modules.
3 Switch for termination resistor, SW1
4 Not for use
5 Supply voltage, 24 VDC
6 User-configurable output relay 2, normally open
7 User-configurable output relay 2, common
8 User-configurable output relay 2, normally closed
9 Supply voltage for sensors, 24 VDC, max. 400 mA
10 Ground, GND
11 User-configurable input and output 4
12 Ground, GND
13 User-configurable input and output 3
14 Ground, GND
15 User-configurable input and output 2
16 Ground, GND
17 User-configurable input and output 1
18 Ground, GND
19 Digital input 2
20 Ground, GND
21 Digital input 1
22 Ground, GND
23 User-configurable digital input and output 2
24 Ground, GND
25 User-configurable digital input and output 1
26 User-configurable output relay 1, normally open
27 User-configurable output relay 1, common
28 User-configurable output relay 1, normally closed
3.4 Identification
3.4.1 Nameplate
TM072130
Pos. Description
1 Product name
2 Version number and product number
3 Factory code
4 Supply voltage
5 Max. power consumption
6 Maximum ambient temperature
7 Production code (year and week)
8 Serial number
9 Enclosure class according to IEC
10 Production site
11 Markings and approvals
3.5 GENIbus
GENIbus, the Grundfos Electronics Network Intercommunications
bus, is a fieldbus developed by Grundfos to meet the need for data
transfer in all typical Grundfos motor or pump applications.
Grundfos devices with GENIbus can be wired together in networks
and integrated in automation systems. Each device on the network
must have a unique GENIbus address. GENIbus is based on the
RS485 hardware standard and typically operates at a baud rate of
9600 bits/s.
4. Servicing the product
The product cannot be serviced.
• Contact Grundfos. If the product is faulty, it must be replaced.
4.1 Replacing the IO module
WARNING
Electric shock
Death or serious personal injury
‐Switch off the power supply before making any electri-
cal connections.
‐Make sure that the power supply cannot be switched
on accidentally.
1. Switch off the power supply to the product and
other components with external supply.
2. Write down the terminal connection of each wire to ensure
correct reconnection.
3. Disconnect all wires.
4. Press the module up gently (1).
8
English (GB)

5. Lift the module off the rail (2).
1
2
TM072263
Removing IO 241
6. Fit the new module.
7. Connect all wires.
9
English (GB)

5. Technical data
5.1 Electrical data
Supply voltage
24 VDC ± 10 %.
Power supply is required to be class 2.
Overvoltage category II.
Check that the supply voltage corresponds to the values stated on
the nameplate.
The wires must be rated at minimum 70 °C (158 °F), minimum 18
AWG.
Mount only copper wires in the terminals.
Power
See nameplate.
Maximum power dissipation
Object Maximum power dissipation
99332827 4.3 W
Input/output connections
Signal excitation (excl. EMC) must be limited to -0.5 to +26 VDC or
an effective clamp current less than ± 15 mADC.
Relay output, REL 1, REL 2
250 VAC nominal and 24 VDC nominal mix use.
Nominal current: 10 mA - 2 A AC/DC.
GENIbus terminal
-7 to +12 VDC.
Nominal current condition: 4 mADC.
Short-circuit current condition: 328 mA.
Terminal impedance: 120 Ω.
CIO terminals
All analogue signals have an out-of-range alarm.
Voltage
0 - 10 V
0 - 5 V
0 - 3.5 V
Current 0 - 20 mA
4 - 20 mA
Temperature
Pt100 2-wire.
Pt1000 2-wire.
Measurement range: -30
to +180 °C (-22 °F to +356 °F).
Digital input mode
Low logic level below 1.8 V.
High logic level higher than 2.7
V.
Digital output mode
Open collector.
Current sink capability: maxi-
mum 75 mA, no sourcing.
Overcurrent protected.
DIO terminals
Digital input mode
Low logic level below 1.8 V.
High logic level higher than 2.7
V.
Digital output mode
Open collector.
Current sink capability: maxi-
mum 75 mA, no sourcing.
Overcurrent protected.
DI terminal
Digital input mode
Low logic level below 1.8 V.
High logic level higher than 2.7
V.
5.2 Mechanical data
Altitude
Maximum 2000 m (6562 ft).
5.3 Temperature
Ambient temperature
Minimum -30 °C (-22 °F)
Maximum +70 °C (+158 °F)
Storage temperature
Minimum -40 °C (-40 °F)
Maximum +70 °C (+158 °F)
5.4 Environmental data
Humidity
5-95 %.
Enclosure class
IP20.
6. Disposing of the product
This product or parts of it must be disposed of in an environmentally
sound way.
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest Grundfos company or
service workshop.
The crossed-out wheelie bin symbol on
a product means that it must be dis-
posed of separately from household
waste. When a product marked with
this symbol reaches its end of life, take
it to a collection point designated by
the local waste disposal authorities.
The separate collection and recycling
of such products will help protect the
environment and human health.
See also end-of-life information at www.grundfos.com/product-
recycling.
10
English (GB)

Argentina
Bombas GRUNDFOS de Argentina S.A.
Ruta Panamericana km. 37.500industin
1619 - Garín Pcia. de B.A.
Tel.: +54-3327 414 444
Fax: +54-3327 45 3190
Australia
GRUNDFOS Pumps Pty. Ltd.
P.O. Box 2040
Regency Park
South Australia 5942
Tel.: +61-8-8461-4611
Fax: +61-8-8340-0155
Austria
GRUNDFOS Pumpen Vertrieb Ges.m.b.H.
Grundfosstraße 2
A-5082 Grödig/Salzburg
Tel.: +43-6246-883-0
Fax: +43-6246-883-30
Belgium
N.V. GRUNDFOS Bellux S.A.
Boomsesteenweg 81-83
B-2630 Aartselaar
Tel.: +32-3-870 7300
Fax: +32-3-870 7301
Belarus
Представительство ГРУНДФОС в Минске
220125, Минск
ул. Шафарнянская, 11, оф. 56, БЦ «Порт»
Тел.: +375 17 397 397 3
+375 17 397 397 4
Факс: +375 17 397 397 1
E-mail: [email protected]
Bosnia and Herzegovina
GRUNDFOS Sarajevo
Zmaja od Bosne 7-7A
BiH-71000 Sarajevo
Tel.: +387 33 592 480
Fax: +387 33 590 465
www.ba.grundfos.com
E-mail: [email protected]
Brazil
BOMBAS GRUNDFOS DO BRASIL
Av. Humberto de Alencar Castelo Branco,
630
CEP 09850 - 300
São Bernardo do Campo - SP
Tel.: +55-11 4393 5533
Fax: +55-11 4343 5015
Bulgaria
Grundfos Bulgaria EOOD
Slatina District
Iztochna Tangenta street no. 100
BG - 1592 Sofia
Tel.: +359 2 49 22 200
Fax: +359 2 49 22 201
E-mail: [email protected]
Canada
GRUNDFOS Canada inc.
2941 Brighton Road
Oakville, Ontario
L6H 6C9
Tel.: +1-905 829 9533
Fax: +1-905 829 9512
China
GRUNDFOS Pumps (Shanghai) Co. Ltd.
10F The Hub, No. 33 Suhong Road
Minhang District
Shanghai 201106 PRC
Tel.: +86 21 612 252 22
Fax: +86 21 612 253 33
Columbia
GRUNDFOS Colombia S.A.S.
Km 1.5 vía Siberia-Cota Conj. Potrero
Chico,
Parque Empresarial Arcos de Cota Bod. 1A.
Cota, Cundinamarca
Tel.: +57(1)-2913444
Fax: +57(1)-8764586
Croatia
GRUNDFOS CROATIA d.o.o.
Buzinski prilaz 38, Buzin
HR-10010 Zagreb
Tel.: +385 1 6595 400
Fax: +385 1 6595 499
www.hr.grundfos.com
Czech Republic
GRUNDFOS Sales Czechia and Slovakia
s.r.o.
Čajkovského 21
779 00 Olomouc
Tel.: +420-585-716 111
Denmark
GRUNDFOS DK A/S
Martin Bachs Vej 3
DK-8850 Bjerringbro
Tel.: +45-87 50 50 50
Fax: +45-87 50 51 51
E-mail: [email protected]
www.grundfos.com/DK
Estonia
GRUNDFOS Pumps Eesti OÜ
Peterburi tee 92G
11415 Tallinn
Tel.: + 372 606 1690
Fax: + 372 606 1691
Finland
OY GRUNDFOS Pumput AB
Trukkikuja 1
FI-01360 Vantaa
Tel.: +358-(0) 207 889 500
France
Pompes GRUNDFOS Distribution S.A.
Parc d’Activités de Chesnes
57, rue de Malacombe
F-38290 St. Quentin Fallavier (Lyon)
Tel.: +33-4 74 82 15 15
Fax: +33-4 74 94 10 51
Germany
GRUNDFOS GMBH
Schlüterstr. 33
40699 Erkrath
Tel.: +49-(0) 211 929 69-0
Fax: +49-(0) 211 929 69-3799
E-mail: [email protected]
Service in Deutschland:
Greece
GRUNDFOS Hellas A.E.B.E.
20th km. Athinon-Markopoulou Av.
P.O. Box 71
GR-19002 Peania
Tel.: +0030-210-66 83 400
Fax: +0030-210-66 46 273
Hong Kong
GRUNDFOS Pumps (Hong Kong) Ltd.
Unit 1, Ground floor, Siu Wai industrial
Centre
29-33 Wing Hong Street & 68 King Lam
Street, Cheung Sha Wan
Kowloon
Tel.: +852-27861706 / 27861741
Fax: +852-27858664
Hungary
GRUNDFOS Hungária Kft.
Tópark u. 8
H-2045 Törökbálint
Tel.: +36-23 511 110
Fax: +36-23 511 111
India
GRUNDFOS Pumps india Private Limited
118 Old Mahabalipuram Road
Thoraipakkam
Chennai 600 097
Tel.: +91-44 2496 6800
Indonesia
PT GRUNDFOS Pompa
Graha intirub Lt. 2 & 3
Jln. Cililitan Besar No.454. Makasar,
Jakarta Timur
ID-Jakarta 13650
Tel.: +62 21-469-51900
Fax: +62 21-460 6910 / 460 6901
Ireland
GRUNDFOS (Ireland) Ltd.
Unit A, Merrywell Business Park
Ballymount Road Lower
Dublin 12
Tel.: +353-1-4089 800
Fax: +353-1-4089 830
Italy
GRUNDFOS Pompe Italia S.r.l.
Via Gran Sasso 4
I-20060 Truccazzano (Milano)
Tel.: +39-02-95838112
Fax: +39-02-95309290 / 95838461
Japan
GRUNDFOS Pumps K.K.
1-2-3, Shin-Miyakoda, Kita-ku
Hamamatsu
431-2103 Japan
Tel.: +81 53 428 4760
Fax: +81 53 428 5005
Korea
GRUNDFOS Pumps Korea Ltd.
6th Floor, Aju Building 679-5
Yeoksam-dong, Kangnam-ku, 135-916
Seoul, Korea
Tel.: +82-2-5317 600
Fax: +82-2-5633 725
Latvia
SIA GRUNDFOS Pumps Latvia
Deglava biznesa centrs
Augusta Deglava ielā 60
LV-1035, Rīga,
Tel.: + 371 714 9640, 7 149 641
Fax: + 371 914 9646
Lithuania
GRUNDFOS Pumps UAB
Smolensko g. 6
LT-03201 Vilnius
Tel.: + 370 52 395 430
Fax: + 370 52 395 431
Malaysia
GRUNDFOS Pumps Sdn. Bhd.
7 Jalan Peguam U1/25
Glenmarie industrial Park
40150 Shah Alam, Selangor
Tel.: +60-3-5569 2922
Fax: +60-3-5569 2866
Mexico
Bombas GRUNDFOS de México
S.A. de C.V.
Boulevard TLC No. 15
Parque industrial Stiva Aeropuerto
Apodaca, N.L. 66600
Tel.: +52-81-8144 4000
Fax: +52-81-8144 4010
Netherlands
GRUNDFOS Netherlands
Veluwezoom 35
1326 AE Almere
Postbus 22015
1302 CA ALMERE
Tel.: +31-88-478 6336
Fax: +31-88-478 6332
E-mail: [email protected]
New Zealand
GRUNDFOS Pumps NZ Ltd.
17 Beatrice Tinsley Crescent
North Harbour Industrial Estate
Albany, Auckland
Tel.: +64-9-415 3240
Fax: +64-9-415 3250
Norway
GRUNDFOS Pumper A/S
Strømsveien 344
Postboks 235, Leirdal
N-1011 Oslo
Tel.: +47-22 90 47 00
Fax: +47-22 32 21 50
Poland
GRUNDFOS Pompy Sp. z o.o.
ul. Klonowa 23
Baranowo k. Poznania
PL-62-081 Przeźmierowo
Tel.: (+48-61) 650 13 00
Fax: (+48-61) 650 13 50
Portugal
Bombas GRUNDFOS Portugal, S.A.
Rua Calvet de Magalhães, 241
Apartado 1079
P-2770-153 Paço de Arcos
Tel.: +351-21-440 76 00
Fax: +351-21-440 76 90
Romania
GRUNDFOS Pompe România SRL
S-PARK BUSINESS CENTER, Clădirea
A2, etaj 2
Str. Tipografilor, Nr. 11-15, Sector 1, Cod
013714
Bucuresti, Romania
Tel.: 004 021 2004 100
E-mail: [email protected]
Russia
ООО Грундфос Россия
ул. Школьная, 39-41
Москва, RU-109544, Russia
Тел. (+7) 495 564-88-00 (495) 737-30-00
Факс (+7) 495 564 8811
E-mail [email protected]
Serbia
Grundfos Srbija d.o.o.
Omladinskih brigada 90b
11070 Novi Beograd
Tel.: +381 11 2258 740
Fax: +381 11 2281 769
www.rs.grundfos.com
Singapore
GRUNDFOS (Singapore) Pte. Ltd.
25 Jalan Tukang
Singapore 619264
Tel.: +65-6681 9688
Faxax: +65-6681 9689
Slovakia
GRUNDFOS s.r.o.
Prievozská 4D 821 09 BRATISLAVA
Tel.: +421 2 5020 1426
sk.grundfos.com
Slovenia
GRUNDFOS LJUBLJANA, d.o.o.
Leskoškova 9e, 1122 Ljubljana
Tel.: +386 (0) 1 568 06 10
Fax: +386 (0)1 568 06 19
E-mail: [email protected]
South Africa
GRUNDFOS (PTY) LTD
16 Lascelles Drive, Meadowbrook Estate
1609 Germiston, Johannesburg
Tel.: (+27) 10 248 6000
Fax: (+27) 10 248 6002
E-mail: [email protected]
Spain
Bombas GRUNDFOS España S.A.
Camino de la Fuentecilla, s/n
E-28110 Algete (Madrid)
Tel.: +34-91-848 8800
Fax: +34-91-628 0465
Sweden
GRUNDFOS AB
Box 333 (Lunnagårdsgatan 6)
431 24 Mölndal
Tel.: +46 31 332 23 000
Fax: +46 31 331 94 60
Switzerland
GRUNDFOS Pumpen AG
Bruggacherstrasse 10
CH-8117 Fällanden/ZH
Tel.: +41-44-806 8111
Fax: +41-44-806 8115
Taiwan
GRUNDFOS Pumps (Taiwan) Ltd.
7 Floor, 219 Min-Chuan Road
Taichung, Taiwan, R.O.C.
Tel.: +886-4-2305 0868
Fax: +886-4-2305 0878
Thailand
GRUNDFOS (Thailand) Ltd.
92 Chaloem Phrakiat Rama 9 Road
Dokmai, Pravej, Bangkok 10250
Tel.: +66-2-725 8999
Fax: +66-2-725 8998
Turkey
GRUNDFOS POMPA San. ve Tic. Ltd. Sti.
Gebze Organize Sanayi Bölgesi
Ihsan dede Caddesi
2. yol 200. Sokak No. 204
41490 Gebze/ Kocaeli
Tel.: +90 - 262-679 7979
Fax: +90 - 262-679 7905
E-mail: [email protected]
Ukraine
ТОВ "ГРУНДФОС УКРАЇНА"
Бізнес Центр Європа
Столичне шосе, 103
м. Київ, 03131, Україна
Tel.: (+38 044) 237 04 00
Fax: (+38 044) 237 04 01
E-mail: [email protected]
United Arab Emirates
GRUNDFOS Gulf Distribution
P.O. Box 16768
Jebel Ali Free Zone, Dubai
Tel.: +971 4 8815 166
Fax: +971 4 8815 136
United Kingdom
GRUNDFOS Pumps Ltd.
Grovebury Road
Leighton Buzzard/Beds. LU7 4TL
Tel.: +44-1525-850000
Fax: +44-1525-850011
U.S.A.
Global Headquarters for WU
856 Koomey Road
Brookshire, Texas 77423 USA
Phone: +1-630-236-5500
Uzbekistan
Grundfos Tashkent, Uzbekistan
The Representative Office of Grundfos
Kazakhstan in Uzbekistan
38a, Oybek street, Tashkent
Tel.: (+998) 71 150 3290 / 71 150 3291
Fax: (+998) 71 150 3292
Grundfos companies

99381581 07.2022
ECM 1340230
www.grundfos.com
Trademarks displayed in this material, including but not limited to Grundfos and the Grundfos logo, are registered trademarks owned by The Grundfos Group. © 2022 Grundfos Holding A/S, all rights reserved.
Table of contents
Other Grundfos I/O System manuals
Popular I/O System manuals by other brands

M-system
M-system R7L-DC16B-R instruction manual

Emerson
Emerson FBxEdge user guide

National Instruments
National Instruments PXIe-4480 Getting started guide

Pickering
Pickering 40-412 user manual

Rockwell Automation
Rockwell Automation Allen-Bradley POINT I/O DeviceLogix user manual

M-system
M-system R7C-YV4 instruction manual

Ocean Swift Synthesis
Ocean Swift Synthesis OS20 manual

Toa
Toa SX-2000CI operating instructions

Future Desion Controls
Future Desion Controls VR18 Procedure of Replacing

ABB
ABB Remote I/O RIO600 Installation and commissioning manual

Gage
Gage CompuGen 1100 Hardware Manual and Driver Installation Guide

WAGO
WAGO 750-460 manual