Grundig RRCD 3760 WEB User manual

INTERNET
RADIO RECORDER CD
RRCD 3760 WEB

CONTENTS------------------------------------------------------------------------------------------------
2
4 SET-UP AND SAFETY
5 OVERVIEW
5 The controls
9 The remote control
12 CONNECTION AND PREPARATION
12 Power supply
13 Connecting an MP3 player or a USB memory stick
13 Inserting a memory card
14 Connecting earphones or headphones
14 Putting batteries in the remote control
15 LAN connection to the Internet
16 WLAN connection to the Internet
17 SETTINGS
17 Automatic station search for FM radio stations
17 Setting the time
18 Additional settings for FM radio stations
19 Restoring the settings (Reset)
20 Registering the device with the WLAN router
23 GENERAL FUNCTIONS
23 Switching on and off
23 Selecting the input source
23 Adjusting the volume
23 Muting
23 Selecting sound settings
24 Setting the custom equalizer
24 Switching the Ultra Bass System on and off
24 Setting the display
25 INTERNET OPERATION
25 Selecting the Internet radio input source
25 Navigating and searching in the Internet menu
26 Selecting Internet radio stations according to criteria
28 Saving Internet radio stations to presets
29 Selecting Internet radio stations for the favourites list
29 Selecting manually added Internet radio stations
30 MUSIC ARCHIVE
30 Audio streaming
30 Selecting the input source music archive (Client)
31 Navigating the music archive menu
31 Playback functions
32 FM MODE
32 Selecting the FM input source
32 Selecting presets – in steps
32 Selecting presets – directly
32 Stereo/mono reception
33 RDS information
2

CONTENTS------------------------------------------------------------------------------------------------
3
ENGLISH
34 CD MODE
34 Selecting the CD input source
35 Inserting a CD
35 Playing back a CD
35 Pausing and resuming playback
35 Repeating the current track
36 Selecting another track
36 Searching for a passage within a track
36 Selecting albums and tracks (only MP3/WMA)
36 Selecting information (only MP3/WMA)
37 Repeating a track (Repeat One)
37 Repeating all the tracks on an album (only MP3/WMA)
37 Repeating all the tracks on a CD (Repeat All)
37 Playing back tracks in random order
38 Playing the start of each track (intro)
38 Creating a playlist
40 USB AND SD/MMC MODE
43 TAPE MODE
43 Selecting the TAPE input source
43 Tape playback
43 Fast forward and reverse search
43 Recording onto tape
44 Recording from FM radio
44 Recording from the CD, USB or SD input sources
45 Synchro recording
46 TIMER MODE
49 SPECIAL SETTINGS
49 Registering on the GRUNDIG homepage
49 Creating favourite lists
52 Searching for radio stations that are not provided by V-Tuner
53 Changing the device name
54 Selecting information
55 Registering the device with the WLAN router with individual settings in
the network
58 INFORMATION
58 Technical data
59 General instructions on laser devices
59 Troubleshooting
61 Cleaning the CD unit
61 Cleaning the tape drive
61 Environmental note
62 CE declaration of conformity
62 Licence conditions
63 Glossary

Please note the following instructions when setting up the system:
This device is designed for the playback of audio signals. Any other
use is expressly prohibited.
If you want to set up the device on wall shelves or in cupboards,
please ensure that the device is adequately ventilated. There must
be at least 10 cm space at the side, above and at the back of the
device.
Do not cover the device with newspapers, table cloths, curtains, etc.
When setting up the device, remember that furniture is often coated
with various types of varnish and plastic, which often contain chem-
ical additives. These additives may cause corrosion to the feet of the
unit. This may leave stains on the surface of the furniture which can
be difficult or impossible to remove.
If the device is exposed to sudden changes in temperature, for
example when taken from the cold into a warm room, wait at least
two hours before using the device.
The device is designed for use in dry rooms. Protect the device and
the CDs from rain, moisture (dripping or splashing water), sand and
heat (heaters or direct sunlight, etc).
Only use the device in a moderate climate.
Do not place any vessels containing liquids (for example, vases) on
the device. Do not insert any foreign objects in the CD compartment.
Do not place any naked flames such as candles on the device.
Never open the device under any circumstances. Warranty claims
are excluded for damage resulting from improper handling.
Do not use any cleaning agents as they may damage the housing.
Clean the device with a clean dry cloth.
Thunderstorms are a danger to all electrical devices. Even if the de-
vice is switched off, it can be damaged by a lightning strike to the
mains or the antenna cable. Always remove the power plug during
a thunder storm.
If malfunctions occur due to static electricity charges or brief mains
voltage surges, reset the device. To do this, pull out the power sup-
ply unit and connect it again after a few seconds.
Note:
Do not connect any other equipment while the device is switched
on. Switch off the other devices as well before connecting them.
Make sure the power plug is freely accessible.
SET-UP AND SAFETY ------------------------------------------------------------
4

ENGLISH
5
Controls
ON/OFF Switches the device in and out of standby mode and
from standby mode to the last input source selected.
Infrared sensor for remote control signals (left, next to the
display).
POWER •Mode indicator. Lights up red during operation.
– ß+Adjust the volume.
MOpens the main menu of the device, for example, to
select the CD, SD, FM, Internet radio, Client, USB and
tape input sources.
AIn the menus: moves the cursor upwards.
In FM mode: selects the next preset.
SIn the menus: moves the cursor down.
In FM mode: selects the previous preset.
9In the menus: opens the options.
In client mode: selects the next track.
In CD mode: press briefly to select the next track, press
and hold down to start the forward search.
In FM mode: press and hold down to start the forwards
frequency search. Press briefly to change the frequency
in small steps.
OVERVIEW ----------------------------------------------------------------------------------------------

6
8In the menus: switches one menu level back.
In client mode: selects the previous track.
In CD mode: press briefly to select the previous track,
press and hold down to start a reverse search.
In FM mode: press and hold down to start the reverse
frequency search. Press briefly to change the frequency
backwards in steps.
P/RANDOM In standby: activates and saves the settings for the time,
¥day and date.
In Internet and FM mode: stores radio stations as presets.
In CD mode: stores CD tracks to create a playlist, plays
tracks in random order.
INTRO/ In standby mode: activates the setting for the switch-on
REPEAT ≈timer.
In CD mode: for playing the intros to CD tracks.
For repeating a track or the whole CD.
In MP3/WMA, CARD and USB mode: for repeating the
tracks on an album.
7CLR In Internet mode: deletes favourite stations and letters/
characters during text input.
In client mode: ends playback.
In CD mode: interrupts and stops playback. Deletes a
playlist.
OVERVIEW ----------------------------------------------------------------------------------------------

ENGLISH
7
OVERVIEW ----------------------------------------------------------------------------------------------
eII In CD, CARD, Client and USB mode: starts and pauses
playback.
DISPLAY In standby: controls the brightness of the display and
selects demo mode.
In Internet mode: switches the display between the
Internet station information and the time/day/date.
In FM mode: switches the display between the radio
ticker text, station type and the time/day/date.
DSC/UBS Briefly press to open the menu for the sound settings
(myEQ, Classic, Pop, Jazz, Rock and myEQ again);
press and hold down to open the setting for the Ultra
Bass-System (ON and OFF).
OPEN
.
Opens and closes the CD compartment.
USB USB interface for connecting an MP3 player or a USB
memory stick.
This interface is not suitable for connecting up to PCs.
SD/MMC Card slot for inserting a memory card (MMC or SD).
UHeadphone jack for connecting a stereo headphone set
with a jack plug (3.5 mm).
This automatically switches off the loudspeakers.

8
Tape Tape compartment. Press here to close.
II Pauses playback and recording.
7 .Ends playback/recording of the tape and opens the tape
compartment.
§Fast forwards the tape to the end.
$Rewinds the tape to the beginning.
z Starts playback.
Starts recording.
Antenna Telescopic antenna for FM (VHF) reception.
LAN Socket for connecting to the Ethernet network via LAN
cable on the back of the device.
AC ∼ Socket for connecting the power supply unit on the back
of the device.
The only way to fully disconnect the device from the
mains is to pull out the plug.
OVERVIEW ----------------------------------------------------------------------------------------------

ENGLISH
9
OVERVIEW ----------------------------------------------------------------------------------------------
The remote control
ON OFF Switches the device to standby mode and from standby
mode to the last input source selected.
eII In music archive, CD, USB and SD/MMC modes:
starts and pauses playback.
7CLR In Internet mode: deletes favourite stations and
letters/characters during text input.
In CD mode: interrupts or ends playback of a
MP3/WMA CD or audio CD;
press twice to delete the playlist of a CD.
DSC/UBS Briefly press to open the menu for the sound settings
(myEQ, Classic, Pop, Jazz, Rock and myEQ again);
press and hold down to open the setting for the Ultra
Bass-System (ON and OFF).
pSwitches the loudspeakers of the device to mute and
back on again.
– ß+Adjust the volume.
SNOOZE/ Interrupts the alarm function for approx. 5 minutes.
NAP/SLEEP Sets the reminder timer. Interrupts the reminder timer.
Sets the sleep timer.

DISPLAY In standby: controls the brightness and contrast of the
display and selects demo mode.
In FM mode: switches the display between the radio
ticker text, station type and the time/day/date.
In CD-DA mode: switches the display between track
number, elapsed playing time and time/week/day.
In MP3/WMA mode: switches the display between
track information, elapsed playing time, ID3 tag infor-
mation and time/day/date.
k/In FM mode: switches between mono reception and
FM MODE automatic mono/stereo.
MOpens the main menu of the device, for example, to se-
lect the CD, SD, FM, Internet radio, Client, USB and
tape input sources.
P/ In standby mode: sets the time/day/date manually.
RANDOM ¥In Internet mode: saves Internet radio stations to presets.
In FM mode: saves radio stations to presets.
In CD mode: saves tracks to a playlist, plays back tracks
in random order.
AUF EINEN BLICK ----------------------------------------------------------------------
10

AUF EINEN BLICK ----------------------------------------------------------------------
1 ... 0 A ... Z Number buttons for selecting presets directly;
for entering numbers/letters in Internet mode and during
installation.
+ 10 Selects the tens for presets from 10 to 40 or for track
numbers from 10 upwards.
INTRO/ In standby mode: activates the setting for the switch-on
REPEAT ≈timer.
In CD mode: plays back the intros of tracks of a CD,
repeats one track, all tracks of a CD or all tracks of an
album.
8 9 For navigating the menus.
In FM mode: pressing and holding down starts the for-
wards or reverse frequency search, pressing briefly
switches the frequency back or forwards in steps.
In CD mode: press briefly to select albums or tracks for-
wards or backwards; press and hold down to search
forwards or backwards for a particular passage.
AS For navigating menus; for entering capital letters and
special characters during installation.
In tuner mode: select stored radio stations.
In MP3/WMA mode: switch to select albums and
tracks.
11
ENGLISH

CONNECTION AND PREPARATION
Power supply
Mains operation
Check that the mains voltage on the type plate (on the bottom of the
device) corresponds to your local mains supply. If this is not the case,
contact your specialist dealer.
1Plug the power cord supplied into the »AC ∼« socket on the back
of the device.
2Plug the power cord into the wall socket.
Caution:
The device is connected to the mains with the power cord. Pull out
the power plug when you want to completely disconnect the
device from the mains.
Unplug the mains plug to disconnect the device from the mains.
Make sure the power plug is easily accessible during operation
and not hindered by other objects.
The socket should be directly by the device and freely accessible.
Battery operation
1Open the battery compartment by pressing »OPEN« underneath
the device and pushing the lid in the direction of the arrow
(»S«).
2Insert six batteries (6 x 1.5 V, type LR20/AM1/D size), observ-
ing the polarity marked in the battery compartment.
Note:
During battery operation in standby mode, it is not possible to
switch the device on with the remote control.
Notes:
Do not expose the batteries to extreme heat, caused for example
by direct sunlight, heaters or fire.
Remove the batteries when they are flat or when you know that
the device will not be used for a long period of time. The manu-
facturer accepts no liability for damage caused by leaking
batteries.
The batteries are switched off during mains operation.
Environmental note:
Batteries, including those which do not contain heavy metal,
should not be disposed of with household waste. Always dispose
of used batteries in accordance with local environmental
regulations.
12

Connecting an MP3 player or a USB memory stick
The device supports most USB memory sticks or MP3 players.
Note:
The device must be switched off while the USB connection is
being made. If it is not switched off, data can be lost.
1Switch off the device by pressing »ON/OFF«.
2Connect the USB interface of the MP3 player to the »USB«
socket on the device, using a standard USB cable
or
insert the USB plug of the USB memory stick in the »USB« inter-
face on the device.
Note:
To remove the MP3 player or the USB memory stick, switch off
the device and pull out the cable for the data medium.
Inserting a memory card
The device supports SD and MMC memory cards.
Note:
The device must be switched off while the memory card is being
inserted. If it is not switched off, data can be lost.
1Switch off the device by pressing »ON/OFF«.
2Insert the memory card carefully into the »SD/MMC« card slot
with the contacts facing down until it latches into place.
Note:
Do not use excessive force when inserting the memory card. Only
apply slight pressure.
The memory cards are resistant to dirt and moisture, but may only
be inserted into the device in a dry and clean condition.
Never remove memory cards during operation. This can damage
the memory card. This type of damage will invalidate your war-
ranty.
Removing the memory card
1Switch off the device by pressing »ON/OFF«.
2Remove the memory card from the card slot by pressing the card
inwards slightly until the latch is released. Then pull out the card.
CONNECTION AND PREPARATION
13
ENGLISH

CONNECTION AND PREPARATION
Connecting earphones or headphones
1Insert the headphone plug (3.5 mm) into the »U« socket on the
device.
– This switches off the loudspeakers.
Note:
Excessive volume levels when using headphones or earphones
can damage your hearing.
Note:
You can also use the »U« socket to connect the device to a hi-fi
system.
Putting batteries in the remote control
1Open the battery compartment by turning the lid of the com-
partment to the right and lifting it off.
2Observe the polarity marked on the base of the battery com-
partment when inserting the batteries (2 x 1.5 V LR 03/AM
4/AAA type).
Notes:
Do not expose the batteries to extreme heat, caused for example
by direct sunlight, heaters or fire.
If the device no longer reacts properly to remote control
commands, the batteries may be flat. Always remove used
batteries. The manufacturer accepts no liability for damage
caused by leaking batteries.
Environmental note:
Batteries, including those which do not contain heavy metal,
should not be disposed of with household waste. Always dispose
of used batteries in accordance with local environmental
regulations.
14

CONNECTION AND PREPARATION
LAN connection to the Internet
Note:
Switch off the device before you connect it to the Internet.
1Connect the Ethernet socket of the modem/router to the
»Ethernet« socket of the device using a standard network cable
(Twistedpair, RJ45 plug).
– The data throughput level is 10/100 MBIT.
Note:
The lines represent the function.
Internet radio
Music archive (audio streaming - client)
Splitter
RRCD 3760 WEB
Music archive on the computer
Modem/routerTelephone socket
15
ENGLISH

CONNECTION AND PREPARATION
WLAN connection to the Internet
Note:
The quality of the radio signal depends on the distance of your
device to your modem/router.
The substance of the building at the installation site can also affect
this.
Note:
The lines represent the function.
Internet radio
Music archive (audio streaming - client)
WLAN
Splitter
RRCD 3760 WEB
Music archive on hard drive (NAS - Network Attached Storage)
Modem/router
Notebook
Telephone socket
)))))))))))
16

Automatic station search for FM radio stations
After connecting the device to the mains power for the first time, the
automatic station search begins. It searches for radio stations and
can save up to 40 presets.
– Display: the preset (»CH«) and the frequency in rapid run-
through.
– The search has started. After the search, the demo mode is
started automatically. This shows you the functions of the de-
vice. The demo mode can be interrupted with »ON/OFF«. The
device then switches to the main menu. Afterwards, you can
save the radio stations as presets of your choice.
Notes:
The device first saves RDS stations and then normal FM stations.
The automatic station search can also be interrupted by pressing
»ON/OFF«. It starts again the next time the system is switched
on.
You can repeat the automatic station search at any time by open-
ing the main menu with »M« and selecting »S« from »Setup«.
In the setup menu, press »S« select the »ATS« item and press
»9« to confirm. Confirm the »Start« function with »9«. The
search starts and previously stored stations are deleted.
Some RDS stations transmit an RDS time signal. If the selected
RDS station transmits time information, the time is updated auto-
matically, if you have set »CT« to »ON«. This takes about five min-
utes.
Setting the time
The following settings may only be performed in standby mode.
1To set the time, press and hold down »P/RANDOM ¥«.
– Display: »24HR«, the time, the day of the week and the date.
2Select hours format (12 or 24 hours) with »A« or »S« and con-
firm with »9«.
– Display: »24HR« or »12HR« (»AM« stands for first half of
the day), time and date, the hours flash.
3Set the hours of the time with »A« or »S« and confirm with
»9«.
– The minutes flash.
CH01
FM 87.50 MHz
Searching
Please Wait...
Alarm
Network Config
-
>ATS
<
-4/5
24HR CT ON
10:00
Monday
2007.05.21
24HR CT ON
20:00
Monday
2007.05.21
17
ENGLISH
SETTINGS----------------------------------------------------------------------------------------------------

4Set the minutes of the time with »A« or »S« and confirm with
»9«.
– The year flashes.
5Set the year with »A« or »S« and confirm with »9«.
– The month flashes.
6Set the month with »A« or »S« and confirm with »9«.
– The day flashes.
7Set the day with »A« or »S« and confirm with »9«.
– »CT ON« flashes. CT is the display for RDS time synchronisa-
tion.
8Activate RDS time synchronisation with »A« or »S« and con-
firm with »9«.
9Quit the setting with »P/RANDOM ¥«.
Notes:
The time must be reset after a power cut or if the mains plug is dis-
connected or updated afresh using the RDS time synchronisation.
If an RDS station which supports time synchronisation is saved on
preset 1, the device synchronises automatically after the power
comes back on.
During operation, you can also set the time/day/date using the
main menu (press »M« to open) »Setup« »Time«.
Further settings for FM radio stations
Automatic station search
1Start the automatic station search in FM mode by pressing and
holding down »8« or »9«.
– The search stops when a station is found.
Manual station search
1Start the manual station search in FM mode by repeatedly press-
ing »8« or »9«.
– The frequency changes in steps of 50 kHz.
24HR CT ON
20:15
Monday
2007.05.21
24HR CT ON
20:15
Tuesday
2007.06.05
18
SETTINGS----------------------------------------------------------------------------------------------------

Storing stations as presets
You can save radio stations that have been found with the auto-
matic station searches or the manual station search to the
preset channel of your choice.
Note:
If stations are already stored on the presets, they are overwritten.
You can search for these stations again afterwards using the au-
tomatic station search.
1In FM mode, select the station with »A« or »S« and press
»P/RANDOM ¥« to highlight.
– The preset display »CH« is set to »00« the digits flash.
2Select the preset number with »A« or »S«.
3Press »P/RANDOM ¥« to save the station.
4To save more stations, repeat steps 2to 4.
Note:
If the device is disconnected from the mains for a long time, all the
presets are deleted.
Restoring the settings (Reset)
You can delete all settings, such as stored radio stations, the time
and alarm and network access data with the reset function.
You should use the reset function if the device needs to be connected
to another network.
1Press »M« to open the main menu.
2Select »Setup« with »A« or »S« and press »9« to confirm.
3Select »System Reset« with »A« or »S« and press »9«
to confirm.
Note:
If you confirm the reset function in step 4, all settings will be
deleted.
4Select the »Yes (Clear all)« menu item with »A« or
»S« and press »9« to confirm.
– Display: »System Reset...«; after a short time the de-
vice switches to standby.
CH01 RDS ST
FM 100.60 MHz
ANTENNE
NO TEXT
Main Menu
USB
TAPE
~ Setup
Network Config
ATS
~ System Reset
 5/5
System Reset
No
~ Yes (Clear all)
19
ENGLISH
SETTINGS----------------------------------------------------------------------------------------------------

Registering the device with the WLAN router
Perform the registration process in the proximity of the router in order
to avoid problems with the WLAN range.
Open the main menu, establish the network connection in the setup
menu and start the configuration wizard.
During this registration procedure, the device checks the
configuration of the WLAN router (e.g. network encryption) and
displays it.
The following three criteria are important:
– Automatic (dynamic) or static use of the IP address in your network.
– Network with or without proxy server.
– Encoded or unencoded network.
1Switch on the WLAN router.
Notes:
The network name (SSID) must be visible and the MAC address
of the device must be enabled in the WLAN router.
You can find the MAC address (unique product ID) in the main
menu at »Setup« »Network Config« »Device
Status« »MAC Address«.
2Press »M« to open the main menu.
3Select »Setup« with »A« or »S« and press »9« to confirm.
4Select »Network Config« with »A« or »S«« and press
»9« to confirm.
– Display: »Initialization Please wait«, the con-
nection to the WLAN router is being established. Afterwards,
the configuration menu is displayed.
5Select »Config Wizard« with »A« or »S« and press
»9« to confirm.
– The configuration wizard appears.
6Start the registration process with »9«.
– Display: »Select Network:«, the available networks are
displayed.
Note:
If the network name (SSID) is suppressed on the WLAN router
for security reasons, the network cannot be found and must be en-
tered manually using the »Enter Network SSID« menu
item.
Main Menu
USB
TAPE
~ Setup
Time
Alarm
~ Network Config
 3/5
Configuration
Device Status
~ Config Wizard >
Advanced Setup
20
SETTINGS----------------------------------------------------------------------------------------------------