Grundig GDN18860FHXN User manual

GDN18860FHXN
EN/İT
58 4580 0000/AM 1/3-en -it
Refrigerator
User Manual
Frigorifero
Manuale utente

1
İT
PL
RO
FR
Contents
1 Safety Instructions 3
1.1 Purpose of usage ..............3
1.2 Safety of children, vulnerable
persons and pets ..........................3
1.3 Electrical safety ................4
1.4 Handling Safety .................4
1.5 Installation Safety .............4
1.6 Operational safety .............6
1.7 Maintenance and cleaning
safety .............................................7
1.8HomeWhiz ..........................7
1.9 Lighting .............................7
1.10 Technical information for Wifi +
Bluetooth ......................................8
2 Environmental instructions 9
2.1 Compliance with the WEEE
Directive and Disposing of the Waste
Product: .......................................9
2.2 Compliance with RoHS
Directive ........................................9
2.3 Package information ..............9
3. Your Freezer 10
4 Installation 11
4.1 The right place for installation 11
4.2 For Products With Water
Fountain / Ice Maker ..................11
4.3 Attaching the plastic
wedges ........................................11
4.4 Adjustment of the feet ..........12
4.5 Electrical connection ............12
5 Preparation 13
5.1 What to do for energy saving 13
5.2 First operation ......................14
6 Operating the Product 15
6.1 Turning off the product .........15
6 Operation of the Product 16
6.2 Indicator panel ......................16
6.3 Humidity controlled crisper
(FullFresh+) ................................19
6.4 Blue light/ Vitamin Care
Technology ..................................19
6.5 Anti-Odour Module
(OdourFresh+) .............................20
6.6 Ice bucket ..............................21
6.7 Ice maker ..............................21
6.8 The dairy (cold storage) bin 21
6.9 Crisper ..................................22
6.10Crisper .....................................
Separator ...................................22
6.11 Cleaning of the Ethylene
Filter ...........................................23
6.12 Cleaning of the Crisper
Separator ...................................23
6.13Using the water fountain .....24
6.14 Filling the water tank of the
water fountain.............................24
6.15 Cleaning the water tank ....24
6.16 Filling the water tank of the
water fountain.............................25
6.17 Cleaning the water tank ....26
6.18 Drip tray ..............................26
6.19Freezing fresh food ..............27
6.20Recommendations for
storing frozen foods in the freezer
compartment ..............................28
6.21Deep freezer details ............28
6.22 Placing food .......................29
6.23 Door open alert ...................29
6.24 Illumination lamp ...............29
7 Maintenance and cleaning 30
7.1 Stainless Steel External
Surfaces ......................................31
7.2 Cleaning of the Products with
Glass Doors ................................31
7.3 Preventing Odours ............31
7.4 Protecting Plastic Surfaces 32
8 Troubleshooting 33

2
A
A
A
C
SUPPLIER’S NAME MODEL IDENTIFIER (*)
INFORMATION
C
.The model information as stored in the product data base
can be reached by entering following website and searching
for your model identifier (*) found on energy label.
https://eprel.ec.europa.eu/
Dear Customer,
Pleasereadthismanualbeforeusingtheproduct.
Thank you for choosing this product. We would like you to achieve
the optimal eciency from this high quality product which has
been manufactured with state of the art technology. To do this,
carefully read this manual and any other documentation provided
before using the product and keep it as a reference.
Heed all information and warnings in the user manual. This way,
you will protect yourself and your product against the dangers
that may occur.
Keep the user manual. Include this guide with the unit if you hand
it over to someone else.
The following symbols are used in the user guide:
NOTICE A hazard that may cause material damage to the product or its
surroundings
Hazard that may result in death or injury.
Important information or useful tips on operation.
Read the user manual.
Risk of fire / Flammable materials

3
İT
PL
RO
FR
1 Safety
Instructions
• This section includes the safety
instructions necessary to prevent
the risk of personal injury or
material damage.
• Our company shall not be held
responsible for damages that may
occur if these instructions are not
observed.
Installation and repair operati-
ons shall always be performed by
Authorized Service.
Always use genuine spare parts
and accessories.
Original spare parts will be
provided for 10 years, following the
product purchasing date.
Do not repair or replace any
part of the product unless specified
expressly in the user manual.
Do not perform any
modifications on the product.
1.1 Purpose of usage
This product is not intended for
commercial use and it shall not be
used out of its intended purpose.
This product is intended for opera-
ting interiors, such as households
or similar.
For example;
- In the staff kitchens of the
stores, offices and other working
environments,
- In farm houses,
- In the units of hotels, motels
or other resting facilities that are
used by the customers,
- In hostels, or similar environ-
ments,
- In catering services and similar
non-retail applications.
This product shall not be used in
open or enclosed external environ-
ments such as vessels, balconies
or terraces. Exposing the product
to rain, snow, sunlight and wind
may cause risk of fire.
1.2 Safety of children,
vulnerablepersons
and pets
• This product may be used by
children aged 8 years and older
and persons with underdeveloped
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a the product safe way and the
hazards involved.
• Children between 3 and 8 years
are allowed to put and take out
food to/from the cooler product.
• Electrical products are dangerous
for children and pets. Children and
pets must not play with, climb on,
or enter the product.
• Cleaning and user maintenance
should not be performed by
children unless there is someone
overseeing them.
• Keep the packaging materials
away from children. Risk of injury
and suffocation.
• Before disposing of old products
that shall not be used any more:

4
1. Unplug the power cord from the mains
socket.
2. Cut the power cord and remove it from
the appliance together with the plug.
3. Do not remove the racks and drawers
from the product to prevent children
from getting inside the appliance.
4. Remove the doors.
5. Store the product so that it shall not be
tipped over.
6. Do not allow children to play with the
scrapped product.
• Do not dispose of the product
by throwing it into fire. Risk of
explosion.
• If there is a lock available in
the product’s door, keep the
key out of children’s reach.
1.3 Electrical safety
• The product shall not be plugged
into the outlet during installation,
maintenance, cleaning, repair, and
transportation operations.
• If the power the cord is damaged,
it shall be replaced by authorized
service only to avoid any risk that
may occur.
• Do not tuck the power cord under
the product or to the rear of the
product. Do not put heavy items
on the power cord. The power cord
should not be bent, crushed, and
come into contact with any heat
source.
• Do not use an extension cord, multi-
plug or adaptor to operate your
product.
• Portable multisockets or portable
power supplies may overheat and
cause fire. Thus, do not have a
multi-plug behind or in the vicinity
of the product.
• The plug shall be easily accessible.
If this is not possible, a mechanism
that meets the electrical
legislation and that disconnects
all terminals from the mains
(fuse, switch, main switch, etc.)
shall be available on the electrical
installation.
• Do not touch the plug with wet
hands.
• When unplugging the appliance,
don’t hold the power cord, but the
plug.
• When positioning the appliance,
ensure the supply cord is not
trapped or damaged
• Do not locate multiple portable
socket-outlets or portable power
supplies at the rear of the appliance.
1.4 Handling Safety
• This product is heavy, do not
handle it by yourself.
• Do not hold the product from its
door while handling the product.
• Be careful not to damage the
cooling system and the pipes
while handling the product. Do
not operate the product if the
pipes are damaged, and contact an
authorized service.
1.5 Installation Safety
• Contact the Authorized Service
for the product’s installation.
To prepare the product for
installation, see the information in
the user guide and make sure the
electric and water utilities are as
required. If the installation is not
suitable, call a qualified electrician
and plumber to have them make
the necessary arrangements.
Otherwise, electric shock, fire,

5
İT
PL
RO
FR
issues with the product or injuries
may occur.
• Check for any damage on the
product before installing it. Do not
have the product installed if it is
damaged.
• Place the product on a level and
hard surface and balance with the
adjustable legs. Otherwise, the
refrigerator may tip over and cause
injuries.
• The product shall be installed in a
dry and ventilated environment.
Do not keep carpets, rugs or similar
floor covers under the product. This
may cause risk of fire as a result of
inadequate ventilation!
• Do not block or cover ventilation
holes. Otherwise, power
consumption may be increased and
damage to your product may occur.
• Do not connect the product to
supply systems such as solar power
supplies. Otherwise, damage to
your product may occur as a result
of the abrupt voltage fluctuations!
• The more refrigerant a refrigerator
contains, the bigger its installation
room shall be. In very small rooms,
a flammable gas-air mixture may
occur in case of a gas leak in the
cooling system. At least 1 m3of
volume is required for each 8 grams
of refrigerant. The amount of the
refrigerant available in your product
is specified in the Type Label.
• The installation place of the product
shall not be exposed to direct
sunlight and it shall not be in the
vicinity of a heat source such as
stoves, radiators, etc.
If you cannot prevent installation of
the product in the vicinity of a heat
source, you shall use a suitable
insulation plate and the minimum
distance to the heat source shall
be as specified below.
- At least 30 cm away from
heat sources such as stoves, hea-
ting units and heaters, etc.,
- And at least 5 cm away from
electric ovens.
• Your product has the protection
class of I. Plug the product in a
grounded socket that conforms
with the Voltage, Current and
Frequency values specified in the
type label. The socket outlet shall
be equipped with a fuse with a
rating of 10 A – 16 A. Our company
shall not be responsible for the
damages that shall be incurred as
a result of operating the product
without ensuring ground and
electrical connections made as per
local or national regulations.
• The product’s power cable must
be unplugged during installation.
Otherwise, risk of electric shock
and injury may occur!
• Do not plug the product to loose,
broken, dirty, greasy sockets or
sockets that has come out their
seats or sockets with a risk of
water contact.
• Place the power cord and hoses
(if available) of the product so
that they shall not cause a risk of
tripping over.
• Penetration of humidity to live
parts or to the power cord may
cause short circuit. Thus, do
not use the product in humid
environments or in areas
where water may splash (e.g.
garage, laundry room, etc.)
If the refrigerator is wet by
water, unplug it and contact an
authorized service.

6
• Do not connect your refrigerator
to power saving devices. These
systems are harmful for the
product.
1.6 Operational safety
• Do not use chemical solvents on the
product. These materials contain an
explosion risk.
• In case of a failure of the product,
unplug it and do not operate until it
is repaired by the authorized servi-
ce. There is a risk of electric shock!
• Do not place a source of flame (e.g.
candles, cigarettes, etc.) on the pro-
duct or in the vicinity of it.
• Do not get on the product. Risk of
falling and injury!
• Do not cause damage to the pipes of
the cooling system using sharp and
piercing tools. The refrigerant that
sprays out in case of puncturing the
gas pipes, pipe extensions or upper
surface coatings may cause irritati-
on of skin and injuries of the eyes.
• Do not place and operate electric
appliances inside the refrigerators/
deep freezer unless it is advised by
the manufacturer.
• Do not jam any parts of your hands
or your body to the moving parts in-
side the product. Be careful to pre-
vent jamming of your fingers betwe-
en the refrigerator and its door. Be
careful while opening or closing the
door if there are children around.
• Do not put ice cream, ice cubes or
frozen food to your mouth as soon
as you take them out of the freezer.
Risk of frostbite!
• Do not touch the inner walls, metal
parts of the freezer or food kept
inside the refrigerator with wet
hands. Risk of frostbite!
• Do not place soda cans or cans
and bottles that contain fluids
that may be frozen to the freezer
compartment. Cans or bottles may
explode. Risk of injury and material
damage!
• Do not use or place materials
sensitive against temperature
such as flammable sprays,
flammable objects, dry ice or other
chemical agents in the vicinity of
the refrigerator. Risk of fire and
explosion!
• Do not store explosive materials
such as aerosol cans with
flammable materials inside the
product.
• Do not place cans containing fluids
over the product. Splashing of
water on an electrical part may
cause the risk of an electric shock
or a fire.
• This product is not intended for
storage and cooling of medicines,
blood plasma, laboratory
preparations or similar materials
and products that are subject to
the Medical Products Directive.
• If the product is used against its
intended purpose, it may cause
damage to or deterioration of the
products kept inside.
• If your refrigerator is equipped
with blue light, do not look at this
light with optical devices. Do not
stare directly at UV LED light for
a long time. Ultraviolet rays may
cause eye strain.
• Do not fill the product with more
food than its capacity. Injuries
or damages may occur if the
contents of the refrigerator falls
when the door is opened. Similar
problems may occur when an
object is placed over the product.

7
İT
PL
RO
FR
• Ensure that you have removed any
ice or water that may have fallen to
the floor to prevent injuries.
• Change the locations of the racks/
bottle racks on the door of your
refrigerator while the racks are
empty only. Danger of physical
injury!
• Do not place objects that may fall/
tipped over on the product. These
objects may fall while opening or
closing the door and cause injuries
and/or material damages.
• Do not hit or exert excessive
pressure on glass surfaces. Broken
glass may cause injuries and/or
material damages.
• The cooling system in your product
contains R600a refrigerant. The
refrigerant type used in the product
is specified in the the type label.
This gas is flammable. Therefore,
be careful not to damage the
cooling system and the pipes while
operating the product. In case of
damage to the pipes;
- do not touch the product or the
power cord,
- Keep the product away from
potential sources of fire that may
cause the product to catch fire.
- ventilation the area where the
product is placed. Do not use a fan.
- Contact authorized service.
• If the product is damaged and
you observe gas leak, please stay
away from the gas. Gas may cause
frostbite if it contacts your skin.
1.7 Maintenance and
cleaning safety
• Do not pull by the door handle if you
shall move the product for cleaning
purposes. Handle may cause injuries
if it is pulled too hard.
• Do not clean the product by
spraying or pouring water on the
product and inside the product.
Risk of electric shock and fire.
• Do not use sharp or abrasive
tools to clean the product. Do not
use materials such as household
cleaning agents, detergents, gas,
gasoline, alcohol, wax, etc.
• Use cleaning and maintenance
agents that are not harmful for
food only inside the product.
• Do not use steam or steamed
cleaning materials for cleaning the
product and thawing the ice inside
it. Steam contacts the live areas in
your refrigerator and causes short
circuit or electric shock!
• Take care to keep water away
from the electronic circuits or
lighting of the product.
• Use a clean, dry cloth to wipe the
dust or foreign material on the
tips of the plugs. Do not use a wet
or damp piece of cloth to clean
the plug. Otherwise, risk of fire or
electric shock may occur.
1.8HomeWhiz
(Maynotbeapplicableforall
models)
• Follow the safety warnings even
if you are away from the product
while operating the product via
HomeWhiz app. Also, pay attention
to the warnings in the app.
1.9 Lighting
(Maynotbeapplicableforall
models)
• Contact an authorized service
when you shall replace the LED /
bulb using for lighting.

8
1.10Technicalinformation
for Wifi + Bluetooth
Frequency Band:
Frequency
Band:
2.4GHz (Wi-fi or
bluetooth opera-
tional)
Max.
Transmission
Power:
< 100mW (Wi-fi or
bluetooth opera-
tional)
Software
information: Quartz_WiFi.XXX
Conformity Decleration for CE:
Arçelik A.Ş. hereby declares that
this appliance complies with
Directive 2014/53/EU.
The complete text of the EU
declaration of conformity is
available in the following internet
address:
Products, From:support.grundig.
com

9
İT
PL
RO
FR
2 Environmental instructions
2.1 Compliance with the WEEE
Directive and Disposing
of the Waste Product:
This product complies with EU WEEE
Directive (2012/19/EU). This product bears a
classification symbol for waste electrical and
electronic equipment (WEEE).
This symbol indicates that this
product shall not be disposed with
other household wastes at the end
of its service life. Used device must
be returned to offical collection point
for recycling of electrical and electronic devices.
To find these collection systems please contact
to your local authorities or retailer where the
product was puchased. Each household
performs important role in recovering and
recycling of old appliance. Appropriate disposal
of used appliance helps prevent potential
negative consequences for the environment
and human health.
2.2 Compliance with
RoHS Directive
The product you have purchased complies
with EU RoHS Directive (2011/65/EU). It does
not contain harmful and prohibited materials
specified in the Directive.
2.3 Package information
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our
National Environment Regulations.
Do not dispose of the packaging materials
together with the domestic or other wastes.
Take them to the packaging material collection
points designated by the local authorities.

10
3. Your Freezer
C
*Optional: Figures in this user guide are schematic and may
not be exactly match your product. If your product does not
comprise the relevant parts, the information pertains to other
models.
1. Freezer compartment door shelves
2. Cooler compartment door shelves
3. Egg Holder
4. Water fountain
5. Cooler compartment small door shelves
6. Bottle shelf
7. Adjustable stands
8. Crisper, Crisper separator and ethylene
filter
9. The dairy (cold storage) bin
10. Filter
11. Glass shelves
12. Fan
13. Icematics
14. Freezer compartment glass
shelf
15. Freezer compartment
16. Cooler compartment
*1
*2
3*4
*5
*6
7
7
8
*9
10
*11
12
*13
14
15
16

11
İT
PL
RO
FR
4 Installation
4.1Therightplaceforinstallation
Your product requires adequate air
circulation to function efficiently. If
the product will be placed in an alcove,
remember to leave at least 5 cm clearance
between the product and the ceiling, rear
wall and the side walls.
If the product will be placed in an alcove,
remember to leave at least 5 cm clearance
between the product and the ceiling, rear
wall and the side walls. Check if the rear
wall clearance protection component
is present at its location (if provided
with the product). If the component
is not available, or if it is lost or fallen,
position the product so that at least 5
cm clearance shall be left between the
rear surface of the product and the wall
of the room. The clearance at the rear is
important for efficient operation of the
product.
4.2 For Products With Water
Fountain / Ice Maker

shall be used. Do not use the old hose
sets. Do not extend the hoses!

water inlet. Do not perform installation on
the hot water inlet. The pressure for the
cold water inlet shall be 80 PSi (550 kPa)
maximum. If your water pressure exceeds
80Psi or has a water impact effect, use
a pressure limiting valve on your mains
system. Ask help from professional
plumbers if you do not know how to
control your water pressure.
High pressure may cause damage to
the hose connections and pose a risk of
flooding.

risk of freezing of hoses. The operating
water temperature interval shall be 0.6°C
(33°F) minimum and 38°C (100°F)
maximum. There is a risk of flooding if
the hose is cracked/perforated.
AWARNING: Do not use extension
or multi sockets in power
connection.
BWARNING: The manufacturer
assumes no responsibility for
any damage caused by the work
carried out by unauthorized
persons.
BWARNING: The product's power
cable must be unplugged during
installation. Failure to do so
may result in death or serious
injuries!
A
WARNING: : If the door span is
too narrow for the product to
pass, remove the door and turn
the product sideways; if this does
not work, contact the authorized
service.
• Place the product on a flat surface to
avoid vibration.
• Place the product at least 30 cm away
from the heater, stove and similar
sources of heat and at least 5 cm away
from electric ovens.
• Do not expose the product to direct
sunlight or keep in damp environments.
• The product requires adequate air
circulation to function efficiently. If the
product will be placed in an alcove,
remember to leave at least 5 cm
distance between the product and the
ceiling and the walls.
4.3 Attaching the
plastic wedges
Use the plastic wedges in the
provided with the product to
provide sufficient space for air
circulation between the product
and the wall.

12
1. To attach the wedges, remove
the screws on the product and
use the screws provided with
the wedges.
1. Attach 2 plastic wedges on the
ventilation cover as shown in
the figure.
4.4 Adjustment of the feet
If the product is not in balanced
position, adjust the front adjustable
stands by rotating right or left.
4.5 Electrical connection
AWARNING: Do not
use extension or multi
sockets in power
connection.
BWARNING: Damaged
power cable must be
replaced by Authorized
Service.
• Our firm will not assume
responsibility for any
damages due to usage
without earthing and power
connection in compliance
with national regulations.
• The power cable plug must
be easily accessible after
installation.
C
Hot surface warning!
The side walls of your
product are equipped with
cooler pipes to enhance
the cooling system. High
pressure fluid may flow
through these surfaces,
and cause hot surfaces
on the side walls. This
is normal and it does
not require servicing. Be
careful when you contact
these areas.

13
İT
PL
RO
FR
5 Preparation
5.1 What to do for
energy saving
AConnecting the product to
electronic energy-saving
systems is harmful, as it
may damage the product.
• For a freestanding appliance;
‘this refrigerating appliance
is not intended to be used as
a built-in appliance.
• Do not keep the refrigerator
doors open for long periods.
• Do not place hot food
or beverages into the
refrigerator.
• Do not overfill the
refrigerator; blocking the
internal air flow will reduce
cooling capacity.
• Depending on the product's
features; defrosting
frozen foods in the cooler
compartment will ensure
energy saving and preserve
food quality.
• Since hot and humid air
will not directly penetrate
into your product when the
doors are not opened, your
product will optimize itself
in conditions sufficient to
protect your food. Functions
and components such as
compressor, fan, heater,
defrost, lighting, display and
so on will operate according
to the needs to consume
minimum energy under these
circumstances.
• Food shall be stored using
the drawers in the cooler
compartment in order
to ensure energy saving
and protect food in better
conditions.
ARead the “Safety
Instructions” section first!

14
5.2 First operation
Before using your refrigerator,
make sure the necessary
preparations are made in line with
the instructions in "Safety and
environment instructions" and
"Installation" sections.
ARead the “Safety
Instructions” section first!
• Keep the product running
without placing any food
inside for 12 hours and do
not open the door, unless
absolutely necessary.
CA sound will be heard
when the compressor is
engaged. It is normal to
hear sound even when the
compressor is inactive,
due to the compressed
liquids and gasses in the
cooling system.
CIt is normal for the front
edges of the refrigerator
to be warm. These areas
are designed to warm
up in order to prevent
condensation.
CFor some models,
indicator panel turns off
automatically 1 minutes
after the door closes. It will
be reactivated when the
door is open or any button
is pressed.

15
İT
PL
RO
FR
6 Operating the Product
• Do not use any mechanical
tools or any other tools than
the recommendations of the
manufacturer to speed up the
thawing operation.
• Do not use parts of your
refrigerator such as the door or
drawers as a support or a step.
This may cause the product to
trip over or its components to be
damaged.
• The product shall be used for
storing food only.
• Turn off the water valve if you
will be away from home (e.g.
at vacation) and you will not be
using the Ice Maker or the water
dispenser for a long period of
time. Otherwise, water leaks
may occur.
6.1Turningofftheproduct
• If you shall not be using the
product for a long period;
- unplug it,
- remove the food to prevent
odours,
- wait until the ice is thawed,
- clean the inside and wait until it
is dried.
- leave the doors open to prevent
damage to internal body
plastics.

16
6 Operation of the Product
6.2 Indicator panel
Indicator panels may vary depending on the model of your product.
Audial and visual functions of the indicator panel will assist in using the
refrigerator.
1
2
*3
5
*6
*7
8
*9
10
*11
C
*Optional: Figures in this user guide are schematic and may
not be exactly match your product. If your product does not
comprise the relevant parts, the information pertains to other
models.
1. Fault Condition Indicator
2. Energy Saving (Display Off) Indicator
3. Wireless Key
4. Freezing Compartment Temperature
Setting Key
5. Cooling Compartment Temperature
Setting Key
6. Support Service Key
7. Quick Freezing Key/Handle Light
Function Setting Key
8. Cooling Compartment OFF (Vacation)
Function Key
9. Compartment Conversion Key
10. Key for Resetting Wireless
Connection Settings
11. Odor Removal Module Key

17
İT
PL
RO
FR
1. Fault Condition Indicator
This indicator ( ) shall be active
when your refrigerator cannot perform
adequate cooling or in case of any
sensor error. “E” shall be displayed
on the Freezing Compartment
temperature indicator and figures
such as 1,2,3... shall be displayed on
the cooling compartment temperature
indicator. These figures provide
information to the authorized service
on the error that has occurred.
Exclamation mark may be displayed
when you load warm food to the
freezing compartment or keep the
door open for a long period of time.
This is not a fault, this warning shall be
removed when the food is cooled down
or when any key is pressed.
2. Energy Saving (Display Off)
Indicator
Energy saving function is enabled
automatically and the energy saving
symbol () is displayed when the door
of the product is not opened or closed
for some period of time. When the
energy saving function is active, all
symbols on the screen other than the
energy saving symbol shall be turned
off. When the energy-saving function
is active, pressing any key or opening
the door will deactivate the energy-
saving function and the display signals
will return to normal. The energy-
saving function is an active function
at the factory defaults and cannot be
cancelled.
3. Wireless Key
When the key is pressed for a long
period (3 seconds), the wireless
connection symbol on the display/
screen flashes slowly (with intervals
of 0.5 seconds). The home network
is initialized on the product this way.
After achieving wireless connection
with the product, wireless connection
symbol ( ) illuminates continuously.
When the initial connection is
established, you may activate/
deactivate the connection with a
short press on this key. The wireless
connection symbol shall flash quickly
(at 0.2 second intervals) until the
connection is established. When the
connection is active, the wireless
network symbol shall light up
continuously.
If the connection cannot be
established for a long period, check
your connection settings and refer
to the “Troubleshooting” section
provided in the user manual.
HomeWhiz application shall be used
for wireless connection. Installation
steps are described on the application
during installation.
You may access the application by
reading the QR code available on
the HomeWhiz label on the product.
Application is offered through App
Store for IOS devices, and through
Play Store for Android devices.
Visit https://www.homewhiz.com/ for
detailed information.’
4. Freezing Compartment
TemperatureSettingKey
Temperature setting is made for
cooler compartment. Pressing
this key will enable the freezer
compartment temperature to be set
at -15,-16,-18,-19,-20,-22,-24 Celcius.
5. Cooling Compartment
TemperatureSettingKey
Allows setting of temperature for
cooler compartment. Pressing
this key will enable the cooling
compartment temperature to be set
at 8,7,6,5,4,3,2 and 1 Celcius.

18
6. Support Service Key
Press this key for 3 seconds to
activate/deactivate the support
service. Detailed information on the
support service is provided in the
“Support Service Feature” section.
7. Quick Freezing Key
When the quick freeze key is
pressed, the quick freeze symbol (
) shall be illuminated and the
quick freeze function shall be
activated. Freezing compartment
temperature is set to -27 Celcius.
Press the key again to cancel
function. The quick freezing function
shall be automatically cancelled
after 52 hours. To freeze a large
amount of fresh food, press the
quick freeze key before placing the
food in the freezer compartment.
*Handle Light Function Setting Key
Handle light function might be
switched between open and closed
modes by pressing quick freezing
button ( ) for 3 seconds. In the
closed mode, the handle light is only
activated when the appliance door is
opened and it goes out after a while
after the door is closed. In the open
mode, the handle light is activated
when the appliance door is opened,
the handle light stays on dimly after
a while after the door is closed. The
handle light function is set to the ex-
factory closed mode.
8. Cooling Compartment OFF
(Vacation) Function Key
Press the key for 3 seconds to
activate the vacation function.
Vacation mode is activated and the
vacation symbol
( ) is illuminated. “- -” shall
be displayed on the Cooling
Compartment temperature
indicator and the cooling
compartment does not actively
perform cooling. You shall not
keep your food in the cooling
compartment when this function is
activated. The other compartments
continue to cool according to the
set temperatures. Press the key
for 3 seconds again to cancel this
function.
9. Compartment Conversion Key
When the compartment
conversion key is pressed for 3
seconds, freezer compartment
switches between cooler, off,
and freezer modes respectively.
When it is operated as cooling
compartment, the temperature
of the compartment may be set
at 8,7,6,5,4,3,2 and 1 Celcius. In
case of OFF mode, compartment
temperature indicator shall display
“- -”.
10. Key for Resetting Wireless
Connection Settings
To reset the wireless connection
settings, press Quick freezing (
) and wireless connection ( )
keys simultaneously for 3 seconds.
All user information recorded
previously are removed on a
product where wireless connection
settings are reset/restored to
factory defaults.
11.Odor Removal Module Key
Press this key for 3 seconds to
enable/disable odor removal
feature. The ( ) LED on the
key turns on when odor removal
feature is enabled. When the
feature is enabled, odor removal
module works periodically