GSD WCT5JM2611 User manual

Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611
PAGE 1 OF 7
Version 1.0
WIFI+BT Module
IEEE 802.11 a/b/g/n/ac 2T/2R
Model Number:WCT5JM2611
Product Descrition
The WCT5JM2611 is a complete dual-band(2.4GHz and 5GHz)WIFI 2×2 module. This module provides a high level
of integration with a dual-stream IEEE 802.11ac MAC/ base band /radio and Bluetooth 5.0.The WLAN operation
supports 20MHz,40MHz and 80MHz channels for data rates up to 866.7Mbps. It fully complies with IEEE 802.11
a/b/g/n/ac feature rich wireless connectivity at high standards,delivers reliable,cost-effective, throughput from an
extended distance.
Product Features
Product Specification
Model
WIF+BT Module
Product Name
WCT5JM2611
Standard
802.11 a /b/g/n/ac
Interface
USB
Data Transfer Rate
1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of 866.7Mbps
Modulation Method
GFSK,π/4-DQPSK,8DPSK(bluetooth)
DQPSK,DBPSK,CCK(802.11b)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11g)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11n)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11a)
QPSK,BPSK,16QAM,64QAM,256QAM with OFDM (802.11ac)
Frequency Band
BLUETOOTH
2402~2480 MHz
WIFI
2.4G: 2412~2462 MHz
5G: 5280 MHz to 5320 MHz (U-NII-2A)
5500 MHz to 5825 MHz (U-NII-2C)
Operation Mode
Infrastructure
Security
WEP, TKIP, AES, WPA, WPA2
Operating Voltage
5V±10%
Current Consumption
＜1000mA
Antenna Type
PIFA
Operating
Temperature
0 ~ 70°C ambient temperature
Storage Temperature
-40 ~ 80°C ambient temperature
Humidity
5 to 95 % maximum (non-condensing)
◆Complies with IEEE 802.11b/g/n for 2.4GHz and IEEE 802.11a/n/ac 5GHz Wireless LAN.
◆Bluetooth v5.0
◆Two transmit and Two receive path(2T2R)
◆Works with all existing network nfrastructure.
◆Capable of up to 128-Bit WEP Encryption.
◆Freedom to roam while staying connected.
◆UP to 866.7 Mbps High-Speed Transfer Rate in 802.11ac mode of operation.
◆Operating Systems：Linux,Win7, Win8, Win10,XP
◆Low power consumption.
◆Easy to install and configure.
◆High speed USB 2.0 interface
◆ROHS compliant

Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611
PAGE 2 OF 7
Version 1.0
NOTICE:
◆please keep this product and accessories attached to the places which children can't touch;
◆do not splash water or other liquid onto this product, otherwise it may cause damage;
◆do not put this product near the heat source or direct sunlight, otherwise it may cause
deformation or malfunction;
◆please keep this product away from flammable or naked flame;
◆please do not repair this product by yourself. Only qualified personnel can be repaired.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Please notice that if the FCC identification number is not visible when the module is installed inside
another device, then the outside of the device into which the module is installed must also display a label
referring to the enclosed module. This exterior label can use wording such as the following: “Contains
FCC ID:2AC23-WCT5J” any similar wording that expresses the same meaning may be used.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator &
your body. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
The devices must be installed and used in strict accordance with the manufacturer's instructions as
described in the user documentation that comes with the product.
Any company of the host device which install this modular with limit modular approval should perform the
test of radiated & conducted emission and spurious emission,etc. according to FCC part 15C : 15.247 and
15.209 & 15.207 ,15B Class B and 15.407 Subpart E requirement, Only if the test result comply with FCC
part 15C : 15.247 and 15.209 & 15.207 ,15B Class B and 15.407 Subpart E requirement，then the host can
be sold legally.
CFR 47 FCC PART 15 SUBPART C&E has been investigated. It is applicable to the modular transmitter

Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611
PAGE 3 OF 7
Version 1.0
This radio transmitter 2AC23-WCT5J has been approved by Federal Communications Commission to
operate with the antenna types listed below, with the maximum permissible gain indicated.
Antenna types not included in this list that have a gain greater than the maximum gain indicated
for any type listed are strictly prohibited for use with this device.
unique antenna connector (IPEX) must be used on the Part 15 authorized transmitters used
in the host product.
The concrete contents to check are the following three points.
１) Must use following one of the three antenna.
２) Should be installed so that the end user cannot modify the antenna;
３) Feed line should be designed in 50ohm
Fine tuning of return loss etc. can be performed using a matching network.
Antenna information
Manufacture: Hui Zhou Gaoshengda Technology Co.,LTD
BT antenna
Antenna model
Frequency (MHz)
Antenna Type
Antenna Gain (dBi)
WCT5H-20
2402-2480
PIFAAntenna
2.77
WCT5H-40
2402-2480
PIFAAntenna
2.60
WCT5H-60
2402-2480
PIFAAntenna
2.71
WCT5J-20
2402-2480
PIFAAntenna
2.88
WCT5J-40
2402-2480
PIFAAntenna
2.73
WCT5J-60
2402-2480
PIFAAntenna
2.79
2.4 G wifi antenna
Antenna model
Frequency (MHz)
Antenna Type
Antenna Gain (dBi)
WCT5H-20
2402-2480
PIFAAntenna
2.77
WCT5H-40
2402-2480
PIFAAntenna
2.60
WCT5H-60
2402-2480
PIFAAntenna
2.71
WCT5J-20
2402-2480
PIFAAntenna
2.88
WCT5J-40
2402-2480
PIFAAntenna
2.73
WCT5J-60
2402-2480
PIFAAntenna
2.79
5G wifi antenna
Antenna model
Frequency (MHz)
Antenna Type
Antenna Gain (dBi)
WCT5H-20
5150-5850
PIFA Antenna
3.79
WCT5H-40
5150-5850
PIFAAntenna
3.83
WCT5H-60
5150-5850
PIFAAntenna
3.64
WCT5J-20
5150-5850
PIFAAntenna
3.89
WCT5J-40
5150-5850
PIFAAntenna
3.86

Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611
PAGE 4 OF 7
Version 1.0
WCT5J-60
5150-5850
PIFAAntenna
3.78
Note: The EUT has 2 kinds of antennas WCT5H and WCT5J.For WCT5H-20/ WCT5H-40/ WCT5H-60, they differ only in
line length. For WCT5J-20/ WCT5J-40/ WCT5J-60, they differ only in line length.
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Please notice that if the ISED certification number is not visible when the module is installed inside
another device, then the outside of the device into which the module is installed must also display a label
referring to the enclosed module. This exterior label can use wording such as the following: “Contains
IC:12290A-WCT5J” any similar wording that expresses the same meaning may be used.
l'appareil hôte doit porter une étiquette donnant le numéro de certification du module d'Industrie Canada,
précédé des mots « Contient un module d'émission », du mot « IC:12290A-WCT5J » ou d'une formulation
similaire exprimant le même sens, comme suit
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems
for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands
5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies
with the e.i.r.p. limit;
for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band
5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate;
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à
l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant
les mêmes canaux;
le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et5 470-5 725
MHz doit se conformer à la limite de p.i.r.e.;
pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis (pour les dispositifs
utilisant la bande de 5 725 à5 850 MHz) doit être conforme àla limite de la p.i.r.e. spécifiée, selon le
cas;

Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611
PAGE 5 OF 7
Version 1.0
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and
compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and
compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 etla
conformité à l'exposition de RSS-102 RF, utilisateurs peut obtenir l'information canadienne surl'exposition
et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne
ouémetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres
entre le radiateur et votre corps.
This radio transmitter 12290A-WCT5J has been approved by Innovation, Science and Economic
Development Canada to operate with the antenna types listed below, with the maximum permissible gain
indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated
for any type listed are strictly prohibited for use with this device.
Le présent émetteur radio 12290A-WCT5J a été approuvé par Innovation, Sciences et Développement
économique Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain
admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain
maximal indiqué pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de
l'émetteur.
unique antenna connector (IPEX) must be used on the Part 15 authorized transmitters used
in the host product.
The concrete contents to check are the following three points.
１) Must use following one of the three antenna.
２) Should be installed so that the end user cannot modify the antenna;
３) Feed line should be designed in 50ohm
Fine tuning of return loss etc. can be performed using a matching network.
Antenna information
Manufacture: Hui Zhou Gaoshengda Technology Co.,LTD
BT antenna
Antenna model
Frequency (MHz)
Antenna Type
Antenna Gain (dBi)
WCT5H-20
2402-2480
PIFAAntenna
2.77
WCT5H-40
2402-2480
PIFAAntenna
2.60
WCT5H-60
2402-2480
PIFAAntenna
2.71
WCT5J-20
2402-2480
PIFAAntenna
2.88
WCT5J-40
2402-2480
PIFAAntenna
2.73

Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611
PAGE 6 OF 7
Version 1.0
WCT5J-60
2402-2480
PIFAAntenna
2.79
2.4 G wifi antenna
Antenna model
Frequency (MHz)
Antenna Type
Antenna Gain (dBi)
WCT5H-20
2402-2480
PIFAAntenna
2.77
WCT5H-40
2402-2480
PIFAAntenna
2.60
WCT5H-60
2402-2480
PIFAAntenna
2.71
WCT5J-20
2402-2480
PIFAAntenna
2.88
WCT5J-40
2402-2480
PIFAAntenna
2.73
WCT5J-60
2402-2480
PIFAAntenna
2.79
5G wifi antenna
Antenna model
Frequency (MHz)
Antenna Type
Antenna Gain (dBi)
WCT5H-20
5150-5850
PIFA Antenna
3.79
WCT5H-40
5150-5850
PIFAAntenna
3.83
WCT5H-60
5150-5850
PIFAAntenna
3.64
WCT5J-20
5150-5850
PIFAAntenna
3.89
WCT5J-40
5150-5850
PIFAAntenna
3.86
WCT5J-60
5150-5850
PIFAAntenna
3.78
Note: The EUT has 2 kinds of antennas WCT5H and WCT5J.For WCT5H-20/ WCT5H-40/ WCT5H-60, they differ only in
line length. For WCT5J-20/ WCT5J-40/ WCT5J-60, they differ only in line length.
Notice to OEM integrator
Must use the device only in host devices that meet the FCC/ISED RF exposure category of mobile, which means the
device is installed and used at distances of at least 20cm from persons.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The end user manual shall include FCC Part 15 /ISED RSS GEN compliance statements related to the transmitter as
show in this manual(FCC/ICanada statement).
Host manufacturer is responsible for compliance of the host system with module installed with all other applicable
requirements for the system such as Part 15 B, ICES 003.
Host manufacturer is strongly recommended to confirm compliance with FCC/ISED requirements for the transmitter
when the module is installed in the host.
The use condition limitations extend to professional users, then instructions must state that this information also
extends to the host manufacturer’s instruction manual.This module is stand-alone modular. If the end product will
involve the Multiple simultaneously transmitting condition or different operational conditions for a stand-alone
modular transmitter in a host, host manufacturer have to consult with module manufacturer for the installation
method in end system.

Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611
PAGE 7 OF 7
Version 1.0
Any company of the host device which install this modular should perform the test of radiated &
condicted emission and spurious emission etc. according to FCC Part 15C: 15.247 and 15.209 &
15.207, 15B class B requirement, only if the test result comply with FCC part 15C: 15.247 and
15.209 & 15.207, 15B class B requirement. Then the host can be sold legally.
This modular transmitter is only FCC authorized for the specific rule parts ( 47CFR Part 15.247
and 15.407) listed on the grant, and that the host product manufacturer is responsible for
compliance to any other FCC rules that apply to the host not covered by the modular transmitter
grant of certification.
Host manufacturer is strongly recommended to confirm compliance with FCC/ISED
requirements for the transmitter when the module is installed in the host.
Must have on the host device a label showing Contains FCC ID:2AC23-WCT5J and IC: 12290A-WCT5J
Installer should put it in the manual：
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems
l'hôte doit utiliser l'instrument uniquement dans des dispositifs qui répondent à la fcc / (catégorie d'exposition rf
mobile, ce qui signifie le dispositif est installé et utilisé à une distance d'au moins 20 cm de personnes.
le manuel de l'utilisateur final doit inclure la partie 15 / (fac rss gen déclarations de conformité relatives à
l'émetteur que de montrer dans ce manuel.
le fabricant est responsable de la conformité de l'hôte, le système d'accueil avec le module installé avec toutes
les autres exigences applicables du système comme la partie 15 b, ices - 003.
accueillir le fabricant est fortement recommandé de confirmer la conformité avec les exigences de la fcc /
(émetteur lorsque le module est installé dans l'hôte.
le dispositif d'accueil doivent avoir une étiquette indiquant contient FCC ID: 2AC23-WCT5J，IC: 12290A-WCT5J
Les personnes chargées de l'installation devraient figurer dans le manuel:
Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation
à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux.
Doit avoir sur l'appareil hôte une étiquette indiquant Contient l'ID FCC : 2AC23-WCT5J et IC : 12290A-WCT5J