GSE GD-2002 User manual
Dartboard cabinet installation height and distance
Assembly Instructions
DARTBOARD CABINET & DARTBOARD SET ASSEMBLY INSTRUCTIONS
Parts Listing
#5 Wall Anchors (3 PCS)
#6 Longer Screws (2 PCS)
#4 Nails (3 PCS)
#1 Mounting Plate (1 PC)
#2 Short Screw (1 PC)
#3 Bumpers (3 PCS)
Step 1 Attach #2 screw and #3 bumpers to back of dartboard, DO NOT insert #2 all the way into board.
This can then be adjusted at step 4.
Step 3 Put #6 screws through mounting plate, cabinet and then into the wall anchors.
©2018 Three-Wins Imports, LLC Questions?
Phoenixville, PA 19460 Contact customer service at
All rights reserved. 1-888-206-4332
Step 2 Drill holes for the center attachment to the wall. If fitting the cabinet to a concrete or solid wall
which is recommended insert the wall anchors, if not then the screws go directly into the wall.
Made In China
WARNING:
CHOKING HAZARD - Small parts. Not for children under 3 yrs
Step 4 Hanging the dartboard on the mounting plate and adjust screw in back of dartboard to provide
secure fit.
Table of contents
