
Signal System NTSC
Image Sensor 1/3” SONY Super HAD II
DSP (Digital Signal Processor
Starforce 2.0
Effective Pixels 768(H) x 494(V)
Scanning System 525 Lines 2:1 Interlace
Scanning Frequency (V) 59.94Hz
Resolution Ultra High 650 TVL
Infrared LEDs None
Min. Illumination 0.00001 LUX
Light Compensation BLC, DWDR, HME
S/N Ratio More than 67dB
Shutter Speed 1/60 ~ 1/1000,000 sec.
Video Output 1.0 Vp-p (75Ω)
Sync System Internal / Line Lock
Voltage Dual Voltage 12VDC/24VAC
Power Consumption 180mA (H/B Off), 280mA (H/B On)
Dimensions Camera 2.8” Diameter 5.1” Length
Dimensions with Mount 9.8” x 7”
Weight 1.59 lbs.
Operating Temperature -40°F to 122°F
Do Not Point Camera Directly into the sun.
Do Not cut video or power wires
Observe Correct Voltage and Polarity
Failure to Observe Warnings May Void Warranty
underneath to adjust settings with OSD
Controls
: Enter OSD Menu/Select Option
UP: Moves Cursor Up
DOWN: Moves Cursor Down
LEFT: Moves Cursor Left/ Change
selected item parameters
RIGHT: Moves Cursor Right/ Change
selected item parameters
LENS
DC for Auto Iris or Manual (DC Should Be Set)
BACKLIGHT
BLC (Back Light Compensation)
DWDR (Digital Wide Dynamic Range)
HME (Highlight Mask Exposure)- Mask Bright Headlights
AGC (AUTO GAIN CONTROL)
The higher the gain, the brighter the image
SENS-UP
When it is night or dark the camera automatically detects
the light level and maintains a color picture at night
White Balance
Use White Balance to adjust the screen color
ATW, MANUAL, AWC-SET
3D DNR (Digital Noise Reduction)
Smart 3D DNR automatically adjust DNR Levels during
motion
DNR (Digital Noise Reduction)
Reduces the background noise in low luminance
environments
D&N MODE (Day/Night)
Set to “COLOR” to Enable Starforce Mode
Set to “AUTO” For Black and White at night