Gtec GT999AHD/W User manual

Before installation, please read this manual carefully
and check the appearance of the camera and
accessory kits.
25M IR Vandal Proof Camera User Manual
Components and accessories
IR Vandal proof Dome Camera 1pcs
User Manual 1pcs
L Wrench 1pcs
Screw for fixing 3pcs
Product Picture and Dimensions
25M IR Vandal proof Camera User Manual
Precautions & Warnings
The installation should be made by qualified personal
and should strictly conform to the local electric laws
and regulations
This camera operating temperature is -10℃-50℃, do
not use it in extreme environment.
12V 1A/1.5A power adapter is recommended. Do not
install under unstable voltage or current conditions.
Do not face the camera to the sun or strong light, it
might cause sensor damage.
Do not expose the camera to the radioactivity, it might
cause sensor damage.
put the cable through the ceiling and adjust the correct
lens position, fix the base ring tightly.
Install the base on the solid ceiling with 3 screws.
Installation
25M IR Vandal proof Camera User Manual
Connection Diagram
DC12V Power Supply
Monitor
Cam-
Video
Power
DVR

Model GT999AHD/W
Pick-up Device 1/3" Sony CMOS
Effective Pixels (H×V) 1280(H)×960(V)
Horizontal Resolution 960P 1.3 Mega
Minimum Illumination Color: 0.02Lux, B/W: 0.008Lux @F1.2 50IRE (AGC ON),0Lux IR on
S/N Ratio More than 60dB
Sense Up 0-30X
Day/night Auto/External/color/mono, with IR cut filter
Electronic Shutter NTSC:1/60s～1/100,000s, PAL:1/50s～1/100,000s
IR Distance 25m
IR Leds 30 Pcs 850nm Infrared LED
IR status IR on: under 10Lux, by CDS Auto Control
OSD functions 2D/3D DNR, DWDR, Anti Fog, Mirror, Privacy, Freeze etc.
OSD Language Chinese/English/German/French/Italian/Spanish/Portuguese/Russian/Polish/Turkish/
Dutch
Auto Gain Control Auto
White Balance Auto
Video Output BNC AHD High Definition Output
Lens 2.8-12mm lens
Power Supply 12V DC
Power Consumption IR on: 500mA, IR off: 60mA
Operating Environment -10 ℃~+50 ℃, RH95% Max
Weight 840g
Color box 161*161*140mm 1090g
Package 12 pcs /Carton,50*33*30cm 14kg
(1) Press "Down" button for 5 seconds, the camera
system will switch from PAL (default) to NTSC, or
from NTSC to PAL.
OSD control button quick guide.
(2) Press "Left" button for 5 seconds, the output
sign al will switch from AHD (default) to CVBS.
(3) Press "Right" button for 5 seconds, the output
sign al will switch from CVBS to AHD.