Guangzhou Yinhe Lighting&Sound Equipment SL-820 User manual

BEAM MOVING HEAD LIGHT
SL-820
USER MANUAL
Guangzhou Yinhe Lighting&Sound Equipment Factory

2
USER MANUAL
Thanks for choosing our light. Please read the instruction carefully before
installation.
SAFETY DIRECTION:
1.Inspect the device carefully before installation in case of loose for transportantion.
2.Do not put the product on the shakable or moist place.
3.Please keep the voltage stable,otherwise the bulb would be broken easily.
4.Check the voltage before turning on lamp. While power down,it needs 15 minutes to
cool before reconnecting the power.
5.Disconnect the power before installation or removing.In case of malfunction,ask
professional technician to repair.(Check Fuse tube first).
6. Do not place lamps for a long time exposure in combustible to avoid fire.
TECHNICAL PARAMETER:
Voltage :110-240V, 50/ 60Hz
Power :350W
Lamp type：Philips MSD Platinum 5R
Bulb Power : 200W
Luminous flux of 7950lm, color temperature can reach 8000K
Inductance ballast and AC / DC switching power supply
Beautiful dot matrix display, a four switch, reverse 180 degrees.
The color wheel: a color wheel, each color plate consists of 14 color temperature film , a
white light
Gobo wheel: 17 pictorial effect, a white light effects
ffect wheel: a rotatable eight prism effect, mobile, atomizing function.
0 - 100% mechanical dimming, support mechanical strobe and adjustable speed
stroboscopic effect stroboscopic macro function,
Lens optical system, electric focus, beam angle of 0 to 4 degrees.
Using photoelectric reset system. automatically retrieving reset when accidental
misoperation
Channel :16CH
Horizontal 540 degree, resolution of 8Bit / 16Bi
The vertical resolution of 270 degree, 8Bit / 16Bit.
Overheat protection
protection grade: IP20
Net weight :19.5KG
Model：SL-820
200W Beam Moving Head Light

3
Item
Channel
DMX address
Control content
1
X axis
0-255
0-270°
2
Y axis
0-255
0-450°
3
X Slight adjustment
0-255
0-1.0°
4
Y Slight adjustment
0-255
0-2.1°
5
X axis Y axis speed
adjustment
0-255
fast - slow
6
Atomization effect
0-255
7
Strobe
0-255
Light off
0-50
Light on
51-240
Flash slow-fast
241-255
Light on
8
Dimmer
0-255
9
Color Wheel
0-8
White
9-14
Color 1
15-25
Color 2
26-31
Color 3
32-39
Color 4
40-47
Color 5
48-55
Color 6
56-64
Color 7
65-72
Color 8
73-82
Color 9
83-87
Color 10
88-95
Color 11
96-103
Color 12
104-112
Color 13
113-129
Color 14
130-191
Rainbow effect clockwise rotation
fast-slow
191-255
Rainbow effect Anti-clockwise
rotation slow-fast
10
Color-chip fine
0-255
11
Gobo wheel
0-8
White
9-11
Gobo 1
12-22
Gobo 2
23-29
Gobo 3
30-37
Gobo 4
38-45
Gobo 5
46-51
Gobo 6
52-56
Gobo 7
57-62
Gobo 8
63-70
Gobo 9
71-77
Gobo 10
78-86
Gobo 11

4
87-90
Gobo 12
91-99
Gobo 13
100-109
Gobo 14
110-115
Gobo 15
116-121
Gobo 16
122-128
Gobo 17
129-190
Rainbow effect clockwise rotation
fast-slow
191-255
Rainbow effect Anti-Clockwise
rotation slow-fast
12
Gobo shake
0-255
Shake speed slow-fast
13
ZooM
0-255
14
Prism
0-31
32-127
128-191
192-255
No prism effect
Prism
Clockwise
counterclockwise
15
Prism rotation
0-255
Is reversing
16
remote
control lamp
0-99
empty
100-105
Controller close the lamp
106-199
empty
200-205
Controller open the lamp
206-253
empty
Reset
254-255
Reset delay
Display function setting ：
1. Key instructions:
The "left" and "right" keys function the same way: return to the previous
interface
"Up" and "down" key: select and edit
"Determine" key (that is "OK" key) : execute function, begin edit, exit edit
MENU enters MENU selection
DOWN to the next option
UP to the previous option
ENTER to confirm the selected function

5
2、Setting function instruction:
Mode
Functional
options
Functional description
System
setting
1.DMX address
1-512
Press the "Enter" to the edit state.
2. Encoder
On
Use encoder (Sensor) to judge out of step and
automatically correct position.
Off
Do not use the encoder (Sensor) to correct the
position
3.X reversal
On-off
4.Y reversal
On-off
5. no signal
Keep
Continue to run according to the original state
Zero
clearing
Motor reset , stop running
6.Turn on light
On
Turn on the light，the bulb is off
Off
Turn on the light，the bulb is off
7. ESC
Back to previous menu
Operation
mode
1.Operation mode
DMX
Slave status: receive DMX signal from console or
host.
Auto
Master status: Auto run and send DMX signal to
slave.
Sound
control
Receiving external sound or vibration, running
built-in program effect.
2.Channel mode
16CH
NO.17 -20 Channel empty
3.ESC
Back to previous menu
Manual
control
Reset
Press“Enter”, After you see the confirmation
dialog box, press the "Enter" again, go to the
reset interface, and reset all the motors.
Bulb control
On-off
Color wheel
0-255
Press“Enter”, go to the edit state. At this
time, select the button, press “up” and “down”
button to change the channel address, then press
the "enter" button to exit the edit state.
……
0-255
Gobo wheel speed
0-255
Display
1.Language
Chinese
Press“Enter”，to Chinese language.
EN
Press“Enter”， to English language.
2. Reverse
setting
On-Off
Press“Enter”, 180 degree reverse display
3. Screensaver
On
Turn off the backlight after 40 seconds
Off
Backlight always on
4.Back
Back to previous menu
Back
Back to main menu （Display the address of the
current settings）