4 5
!
WARNINGS
This product should be used only in accordance with the speci ications outlined in this
manual. Usage other than what has been speci ied here may result in serious injury.
·Disassembly, repair or remodeling by an unauthorized person may result in serious harm.
·Do not use i plug is damaged or loose.
·Keep this product out o the reach o children and pets.
·Be care ul not to put water in the humidity spout.
·Be ore illing or cleaning the unit, make sure it is unplugged.
·Once the humidi ier has been turned on, do not move it.
·Do not remove the water tank rom the unit while it is on.
·Do not handle the plug with wet hands.
·Do not excessively bend, twist or pull the power cord.
·Avoid placing this product where the humidity spout is pointed directly at an object.
·Do not directly inhale the humidity spout.
·Do not place this product on a sloped or unstable sur ace.
·When not in use, unplug the unit.
·Do not ill the water tank with hot or boiling water.
·Do not use this product in direct sunlight, or near a gas stove or heater.
·I the water tank becomes cracked or damaged, do not use.
·Do not keep this product running or an extended period o time.
·Do not clean the unit or water tank with detergents or chemicals o any kind.
·Do not use this product near any other electronic device.
·Do not cover the humidity opening at any time during use.
·Do not use this product near a sink.
·Do not drink water rom tank.
·Do not place this product on an absorbent sur ace.
Failure to comply with the warnings listed above may result in electric shock or serious injury.
DIRECTIONS FOR USE (cont.)
3. Pour cool, clean water directly
into the tank. Do not pour
anything but water into the
water tank.
4. Close the tank lid, turning it
to the right.
5. Attach the tank to the body
o the unit and plug in.
8. As soon as the Re ill LED lights
up, turn the unit o and re ill
the water tank.
DIRECTIONS FOR USE
Ma e sure the unit is unplugged.
1. Separate the tank rom the
body o the unit. 2. Open the tank lid, turning it
to the le t.
6. To select the temperature o
humidity turn the mode dial
to cool or warm. The Power
LED will light up.
7. Turn the spray volume knob to
the right to increase mist/humidity
level. Turn le t and the humidity/mist
level decreases.