GuruGear BT-56 User manual
FEATURES
•Supports Bluetooth
• Wireless range: 33 feet
• Supports prole A2DP, AVRCP, HSP, HFP
• Built-in microphone
• Micro-USB port for battery recharge
• 3.5mm audio input
• Adjustable headband
• Driver: 40mm
• DC battery power: built-in 800 mAH rechargeable lithium ion battery
• Headphone battery life: up to 30+ hours
• Speaker battery life: up to 3 hours
INCLUDES
• 3.5mm audio cable
• USB cable
• Carry pouch
Power/Pair/Play/Pause/
Press and hold for approx. 7 seconds to
power the unit on and begin pairing.
Press to play or pause the current track.
Press and hold to power off.
Volume +/-
Push up or down to adjust volume.
Pairing Indicator Light
Speaker Switch
Slide to switch from
headphone to speaker mode.
THE EXTERNAL SPEAKERS ON THE
HEADPHONES ARE NOT WATERPROOF.
DO NOT USE IN RAINY OR DAMP
WEATHER CONDITIONS.
!
Microphone
Line In
DC Power Input
GuruGear 2 in 1 Wireless
Headphone with BT Speaker
Model Number: BT-56
Owner’s Manual
Requires a 3.5mm audio cable (included).
Note: The headphones do not have to be powered on to hear music through
the Line Input. This feature can be used to conserve battery power.
1. Connect a 3.5mm audio cable to the Line In port on the unit and the audio
output or headphone jack on an audio device.
2. Use the controls on the connected device to play your audio through the unit.
Line In
LED Indicators
Status Indicator
Power On
Power Off
Flashing Blue Light
No Light
Charging Solid Red Light
Charging Complete No Light
Pairing Flashing Red and Blue Lights
Charging the Battery
Bluetooth Wireless Audio
Pairing to a Device and Playing Audio
1. Press and hold the Power/Pair button on the unit for approximately
7 seconds to power the unit on and begin pairing. The pairing indicator
will ash red and blue. When pairing, remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, select GuruGear in your Bluetooth
settings/device menu. If your device requests a password, enter the default
password 0000. Refer to the user’s manual for your specific device for instructions
on pairing and connecting Bluetooth devices.
3. When successfully paired, an audible chime will sound from the speakers and
the pairing indicator will slowly ash blue. Audio played through the
connected Bluetooth device will now be heard through the headphones.
4. Use the controls on the connected device to select and begin playing audio.
Use the controls on the connected Bluetooth device or the controls on the
headphones to play, pause and adjust the volume.
After initial pairing, the unit will stay paired unless unpaired manually by the
user, or erased due to a reset of the device. If your device should become
unpaired or you nd it is unable to connect, repeat the steps listed above.
Using the Speakerphone
1. When a call is received, a ringtone will sound through the speakers.
2. Press the Power/Pair/Play/Pause button to accept the call or accept the call
with the native controls on the connected device.
3. The incoming call received through the device will now be heard through the
headphones.
4. To end the call, press the Power/Pair/Play/Pause button or end the call using
the native controls on the connected device.
Requires a Micro-USB to USB cable (included).
1. Using a Micro-USB to USB cable (included), connect to the USB port of
a powered on computer or USB power adaptor (not included) to charge
the unit.
Federal Communications Commission notice
FCC Label
This device complies with Part 15 of the FCC Rules. Operation of this product is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not expressly approved by the party responsible for
compliance with the FCC Rules could void the user’s authority to operate this
equipment.
FCC ID:2AHI6-BT-56
MADE IN CHINA 4NN6CK0000010 GuruGear™ is Distributed by Bluestem Brands
Inc 6509 Flying Cloud Drive Eden Prairie, MN 55344
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
