MUVEACOUSTICS Impulse 2 Pro Dimensions and installation guide

www.muveacoustics.com
Thank you for trusting MUVEACOUSTICS with
delivering you excellence in sound. We
encourage you to connect with us and
become a part of our community!
SCAN THE QR CODE YOU WILL FIND INSIDE.
SHARE WITH US YOUR PRODUCT EXPERIENCE.

JOIN THE COMMUNITY
Sign up now for
• special offers
• events
• contests
• access to new products launch
www.muveacoustics.com/community

User Manual and Warranty
IMPULSE 2PRO Headphones
Padded Protective Soft Case
Micro USB Charging Cable
Audio Cable
User Manual & Warranty

FEATURES STORY
3.5 MM AUDIO JACK
CHARGING PORT
VOL. UP
VOL. DOWN
ON / OFF
PAIRING

VINTAGE TREATED HEADBAND WITH
EXTENSION BAR
DETACHABLE CABLE WITH
IN-LINE MICROPHONE AND
QUICK RESPONSE BUTTON
Functions vary depending on your phone, tablet
or application.
IN-LINE MICROPHONE
QUICK RESPONSE BUTTON

Functions vary depending on your phone, tablet
or application.
PRODUCT SPECIFICATIONS
Bluetooth
Bluetooth profiles
Connectivity class
High performance driver
Frequency response
Sensitivity
Impedance
Signal to noise ratio
Charging method
Battery type
Battery capacity
Play time
Recharge time
Dimensions
4.2
A2DP, HSP, HFP, AVRCP
Bluetooth Class 2 (10 meter)
2 x Ø40 mm
20 Hz - 20 kHz
105 +/- 3 dB at 1kHz
32 Ω
>94 dB
Micro USB charging
Lithium-ion polymer battery
300 mAh
up to 15 hours (varies by volume
level and audio content)
Approx. 1.5 hours
174 x 174 x 75 mm

OPERATE YOUR HEADPHONES
Bluetooth Connection
Devices with Bluetooth 4.2 wireless technology
equipped computers, smartphones, and MP3 players.
To use Bluetooth for your audio connection, first
pair IMPULSE 2PRO with your audio source
(music player, smartphone, laptop or other
Bluetooth equipped device that can act as audio
source). Make sure IMPULSE 2PRO is fully
charged (without audio cable plugged in) and
turn it on by press and hold the Power button for
3 seconds.Once the power is turned on,
IMPULSE 2PRO is in Bluetooth pairing mode. You
can hear a voice notification – “Power on, pairing”
and the LED indicator is blinking in red / blue

quickly. Make sure Bluetooth is enabled on
your audio source and in a few moments
“MUVEACOUSTICS:IMPULSE2PRO” will appear
on your list of possible Bluetooth connections.
Press “pair” or “connect” on your device and after
the connection is made, the LED indicator will
turn to steady blue and you can hear “Your
device is connected”. Then your device is paired.
From now on, when you turn on IMPULSE 2PRO,
it will automatically search for the last Bluetooth
device it was paired with.
While there is no pairing with Bluetooth device
within 5 minutes, IMPULSE 2PRO will turn off
automatically with a voice notification – “Power
off” and you need to switch on again for further use.
Bluetooth Connection
Devices with Bluetooth 4.2 wireless technology
equipped computers, smartphones, and MP3 players.
To use Bluetooth for your audio connection, first
pair IMPULSE 2PRO with your audio source
(music player, smartphone, laptop or other
Bluetooth equipped device that can act as audio
source). Make sure IMPULSE 2PRO is fully
charged (without audio cable plugged in) and
turn it on by press and hold the Power button for
3 seconds.Once the power is turned on,
IMPULSE 2PRO is in Bluetooth pairing mode. You
can hear a voice notification – “Power on, pairing”
and the LED indicator is blinking in red / blue

Battery Charging
Please use the cable provided to recharge the
headphones. It will take 1.5 hours to fully charged.
Wired Connection
IMPULSE 2PRO has a 3.5mm audio cable. If there
is no Bluetooth source available or if you simply
prefer a wired connection, you can connect your
IMPULSE 2PRO directly to your audio source
using a stereo male 3.5mm connector at the end
of the cable.
IMPULSE 2PRO headphones comes with audio
cable included. Control and talk functions vary
depending on your phone, tablet or application.
Bluetooth function will be shut off automatically
when audio cable is plugged in.
quickly. Make sure Bluetooth is enabled on
your audio source and in a few moments
“MUVEACOUSTICS:IMPULSE2PRO” will appear
on your list of possible Bluetooth connections.
Press “pair” or “connect” on your device and after
the connection is made, the LED indicator will
turn to steady blue and you can hear “Your
device is connected”. Then your device is paired.
From now on, when you turn on IMPULSE 2PRO,
it will automatically search for the last Bluetooth
device it was paired with.
While there is no pairing with Bluetooth device
within 5 minutes, IMPULSE 2PRO will turn off
automatically with a voice notification – “Power
off” and you need to switch on again for further use.

OPERATIONAL GUIDANCE
Function Button Audio LED
Power on
the
headphone
Pairing with
Bluetooth
device
Pairing
success
Play / pause
N/A
Press the
On/Off
button once
Blue light
goes on for
1 second
Blue and red
light flashing
quickly
Blue light goes
on constantly
Play mode:
blue light
flashing once
every 4 seconds
Pause mode:
blue light goes
on constantly
Power On
Pairing
Your device
is connected
N/A
Battery Charging
Please use the cable provided to recharge the
headphones. It will take 1.5 hours to fully charged.
Wired Connection
IMPULSE 2PRO has a 3.5mm audio cable. If there
is no Bluetooth source available or if you simply
prefer a wired connection, you can connect your
IMPULSE 2PRO directly to your audio source
using a stereo male 3.5mm connector at the end
of the cable.
IMPULSE 2PRO headphones comes with audio
cable included. Control and talk functions vary
depending on your phone, tablet or application.
Bluetooth function will be shut off automatically
when audio cable is plugged in.
Press and
hold the
On/Off
button for
3 second

OPERATIONAL GUIDANCE
Function Button Audio LED
Incoming
call
Phone
call in
progress
End a call
Refuse
incoming
call
Redialling
(last call)
Press the On/Off
button once
N/A
Press the On/Off
button once
Press and hold
the On/Off
button for
2 seconds
Press the On/Off
button twice
with
ringtone
N/A
N/A
N/A
N/A
Blue light flashing 3
times every 3 seconds
Blue light
flashing 3 times
every 3 seconds
Blue light flashing
once every 4 seconds
in play mode
N/A
Blue light flashing 3
times every 3 seconds

OPERATIONAL GUIDANCE
Function Button Audio LED
Increase
volume
Decrease
volume
Next song
Previous
song
Press "+" button
repeatedly
Press "-" button
repeatedly
Press and hold the
"+" button for 1 second
Press and hold the
"-" button for 1 second
with
maximum
volume alert
N/A
N/A
N/A
N/A
N/A
N/A
N/A

OPERATIONAL GUIDANCE
Function Button Audio LED
Battery
level is low
Power off
the
headphone
Battery
charging mode
Battery has been
fully charged
N/A
Press and hold
the On/Off button
for 3 seconds
N/A
N/A
Battery
Low
Power
Off
N/A
N/A
Blue light
flashing
once every
4 seconds
Red light
goes on for
1 second
Red light
goes on
constantly
Blue light
goes on
constantly

Warnings
∙
∙
∙
∙
Cautions
∙
SAFETY INSTRUCTIONS
Contains small parts which may be a choking
hazard. Not suitable for children under age three.
Set a low volume setting before using the
headphones.
Long-term exposure to loud music or sounds
may cause hearing damage. It is best to avoid
high volume levels when using these
headphones, especially for extended periods.
Do not use these headphones when operating
a motor vehicle, a bicycle, machinery or where
your inability to hear outside sounds may
present a danger to you or others.
Using these headphones limits your ability to hear

Contains small parts which may be a choking
hazard. Not suitable for children under age three.
Set a low volume setting before using the
headphones.
Long-term exposure to loud music or sounds
may cause hearing damage. It is best to avoid
high volume levels when using these
headphones, especially for extended periods.
Do not use these headphones when operating
a motor vehicle, a bicycle, machinery or where
your inability to hear outside sounds may
present a danger to you or others.
Using these headphones limits your ability to hear
∙
noises around you, regardless of listening volume.
Please use caution when using these headphones.
Do not drop, sit on, or allow the headphones to
be immersed in water.
This symbol indicates that this product
shall not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the recycling
of electrical and electronic equipment.
Unsuitable for children under three years
because it might, for instance, contain
small parts.
To prevent possible hearing damage, do not
listen at high volume levels for long periods.

noises around you, regardless of listening volume.
Please use caution when using these headphones.
Do not drop, sit on, or allow the headphones to
be immersed in water.
This symbol indicates that this product
shall not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the recycling
of electrical and electronic equipment.
Unsuitable for children under three years
because it might, for instance, contain
small parts.
To prevent possible hearing damage, do not
listen at high volume levels for long periods.
The input voltage to the product is 5V 1A.
In order to charge the product in safe
manner and reliable conditions, please
only adopt certified appropriate charger /
adapter for charging the product.
Only charge the product at ambient
temperatures between 10 deg °C / 50
deg °F and 40 deg °C / 104 deg °F.
Do not heat above 70 deg °C / 158 deg °F,
eg. Do not expose to sunlight or throw
into fire.
Switch off the product after use.
Please note that we won’t take any
responsibility for any wrong operation
(eg. Voltage higher than 5V) as this may
result in severe injury or loss of property,
and we cannot control the operating
process during the time the user using

FCC Statement
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee
The input voltage to the product is 5V 1A.
In order to charge the product in safe
manner and reliable conditions, please
only adopt certified appropriate charger /
adapter for charging the product.
Only charge the product at ambient
temperatures between 10 deg °C / 50
deg °F and 40 deg °C / 104 deg °F.
Do not heat above 70 deg °C / 158 deg °F,
eg. Do not expose to sunlight or throw
into fire.
Switch off the product after use.
Please note that we won’t take any
responsibility for any wrong operation
(eg. Voltage higher than 5V) as this may
result in severe injury or loss of property,
and we cannot control the operating
process during the time the user using
this product.
In extreme cases, abuse or misuse of
Lithium battery pack can lead to explosion,
heat generation, fire development or
smoke development.

that interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
-
-
-
-
Changes or modifications not expressly approved
FCC Statement
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee
this product.
In extreme cases, abuse or misuse of
Lithium battery pack can lead to explosion,
heat generation, fire development or
smoke development.
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.

that interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
-
-
-
-
Changes or modifications not expressly approved
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
by the party responsible for compliance could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
FCC ID: 2ANVW-MA-1600