GW Security GWE332PTWIFI User manual
12345
Fast Installation Manual
Quality . Service . Competitiveness
Before operating this unit,please read these instructions
carefully,and save them for future use.
V1.4
This manual is suitable for various types of cameras.
(The appearance may be different due to different batches. The details
are subject to the receipt.This manual is only for the installation
instructions of this series of equipment.)
1. Wireless Pan-tilt IP Camera
2. WiFi Spot Light Camera
3. WiFi MINI Dome Cmaera
DC power
supply (5V)
4
1
Photosensitive
2
3
Reset button
SD card slot
2
Reset button
4
5
Network port and
indicator light
3SD card slot
1
Photosensitive
DC power
supply (12V)
(* You can see it by unscrewing the screw.)
Description
Collect ambient luminosity value, turn
on the infrared light when the current
illuminance is less than 3 Lux.
The working state of the device, long
press 3-5 seconds to restore the
factory, the camera will have a voice
prompt broadcast.
TF card, storage video and playback
video.
Power input
Connect the Lan cable and check the
current device status indicator light
( flashes once /1 s on hotspot mode)
1. Photosensitive
2. Reset button
3. SD card slot
4. DC power supply
5. Network port and
indicator light
APP Download and Installation
Software Installation Wifi Configuration add process
Users can search “EseeCloud” on APP store or “IP PRO” on
Google Play,or scan the QR code below to install the APP.
EseeCloud APP APP download
Note: For iOS system, it requires iOS 9.0 version or above.
For Android,Android 5.1 or above.
Account login
Account login: On the login
interface, enter the account/
phone number/email, and the
corresponding password, and
click the "OK" button to log in.
Third-party login: APP supports
third-party login. Click the
third-party social software icon,
jump to the APP to complete
the authorization and log in.
Interface description
1. Power on the device, wait
for the indicator light to flash
slowly, connect to the IPCXXX
hotspot in the phone settings,
the password is 11111111;
2. Open the APP and
click on the "+" in the
upper right corner to
enter the scan code
interface;
3. Scan the QR code
on the device ;
4. On the search device
interface, click "Add";
5. To view and use via WiFi
or other networks, please
select Remote View;
If there is no network, if
you connect to the camera
at close range, please select
local Direct Connection;
Remote View adding process
Add WIFI mode (optional)
1. Select "Remote View"
to add, connect the device
to WiFi, select the correct
WiFi, enter the password,
and click Confirm;
风琴折，折后净尺寸70x130mm，128克双铜彩印
2
4
5
Reset button
DC power
supply (12V)
Network port and
indicator light
3SD card slot
(* You can see it by unscrewing the screw.)
12345
Fast Installation Manual
Quality . Service . Competitiveness
Before operating this unit,please read these instructions
carefully,and save them for future use.
V1.4
This manual is suitable for various types of cameras.
(The appearance may be different due to different batches. The details
are subject to the receipt.This manual is only for the installation
instructions of this series of equipment.)
1. Wireless Pan-tilt IP Camera
2. WiFi Spot Light Camera
3. WiFi MINI Dome Cmaera
DC power
supply (5V)
4
1
Photosensitive
2
3
Reset button
SD card slot
2
Reset button
4
5
Network port and
indicator light
3SD card slot
1
Photosensitive
DC power
supply (12V)
(* You can see it by unscrewing the screw.)
Description
Collect ambient luminosity value, turn
on the infrared light when the current
illuminance is less than 3 Lux.
The working state of the device, long
press 3-5 seconds to restore the
factory, the camera will have a voice
prompt broadcast.
TF card, storage video and playback
video.
Power input
Connect the Lan cable and check the
current device status indicator light
( flashes once /1 s on hotspot mode)
1. Photosensitive
2. Reset button
3. SD card slot
4. DC power supply
5. Network port and
indicator light
APP Download and Installation
Software Installation Wifi Configuration add process
Users can search “EseeCloud” on APP store or “IP PRO” on
Google Play,or scan the QR code below to install the APP.
EseeCloud APP APP download
Note: For iOS system, it requires iOS 9.0 version or above.
For Android,Android 5.1 or above.
Account login
Account login: On the login
interface, enter the account/
phone number/email, and the
corresponding password, and
click the "OK" button to log in.
Third-party login: APP supports
third-party login. Click the
third-party social software icon,
jump to the APP to complete
the authorization and log in.
Interface description
1. Power on the device, wait
for the indicator light to flash
slowly, connect to the IPCXXX
hotspot in the phone settings,
the password is 11111111;
2. Open the APP and
click on the "+" in the
upper right corner to
enter the scan code
interface;
3. Scan the QR code
on the device ;
4. On the search device
interface, click "Add";
5. To view and use via WiFi
or other networks, please
select Remote View;
If there is no network, if
you connect to the camera
at close range, please select
local Direct Connection;
Remote View adding process
Add WIFI mode (optional)
1. Select "Remote View"
to add, connect the device
to WiFi, select the correct
WiFi, enter the password,
and click Confirm;
风琴折，折后净尺寸70x130mm，128克双铜彩印
2
4
5
Reset button
DC power
supply (12V)
Network port and
indicator light
3SD card slot
(* You can see it by unscrewing the screw.)
12345
Fast Installation Manual
Quality . Service . Competitiveness
Before operating this unit,please read these instructions
carefully,and save them for future use.
V1.4
This manual is suitable for various types of cameras.
(The appearance may be different due to different batches. The details
are subject to the receipt.This manual is only for the installation
instructions of this series of equipment.)
1. Wireless Pan-tilt IP Camera
2. WiFi Spot Light Camera
3. WiFi MINI Dome Cmaera
DC power
supply (5V)
4
1
Photosensitive
2
3
Reset button
SD card slot
2
Reset button
4
5
Network port and
indicator light
3SD card slot
1
Photosensitive
DC power
supply (12V)
(* You can see it by unscrewing the screw.)
Description
Collect ambient luminosity value, turn
on the infrared light when the current
illuminance is less than 3 Lux.
The working state of the device, long
press 3-5 seconds to restore the
factory, the camera will have a voice
prompt broadcast.
TF card, storage video and playback
video.
Power input
Connect the Lan cable and check the
current device status indicator light
( flashes once /1 s on hotspot mode)
1. Photosensitive
2. Reset button
3. SD card slot
4. DC power supply
5. Network port and
indicator light
APP Download and Installation
Software Installation Wifi Configuration add process
Users can search “EseeCloud” on APP store or “IP PRO” on
Google Play,or scan the QR code below to install the APP.
EseeCloud APP APP download
Note: For iOS system, it requires iOS 9.0 version or above.
For Android,Android 5.1 or above.
Account login
Account login: On the login
interface, enter the account/
phone number/email, and the
corresponding password, and
click the "OK" button to log in.
Third-party login: APP supports
third-party login. Click the
third-party social software icon,
jump to the APP to complete
the authorization and log in.
Interface description
1. Power on the device, wait
for the indicator light to flash
slowly, connect to the IPCXXX
hotspot in the phone settings,
the password is 11111111;
2. Open the APP and
click on the "+" in the
upper right corner to
enter the scan code
interface;
3. Scan the QR code
on the device ;
4. On the search device
interface, click "Add";
5. To view and use via WiFi
or other networks, please
select Remote View;
If there is no network, if
you connect to the camera
at close range, please select
local Direct Connection;
Remote View adding process
Add WIFI mode (optional)
1. Select "Remote View"
to add, connect the device
to WiFi, select the correct
WiFi, enter the password,
and click Confirm;
风琴折，折后净尺寸70x130mm，128克双铜彩印
2
4
5
Reset button
DC power
supply (12V)
Network port and
indicator light
3SD card slot
(* You can see it by unscrewing the screw.)
12345
Fast Installation Manual
Quality . Service . Competitiveness
Before operating this unit,please read these instructions
carefully,and save them for future use.
V1.4
This manual is suitable for various types of cameras.
(The appearance may be different due to different batches. The details
are subject to the receipt.This manual is only for the installation
instructions of this series of equipment.)
1. Wireless Pan-tilt IP Camera
2. WiFi Spot Light Camera
3. WiFi MINI Dome Cmaera
DC power
supply (5V)
4
1
Photosensitive
2
3
Reset button
SD card slot
2
Reset button
4
5
Network port and
indicator light
3SD card slot
1
Photosensitive
DC power
supply (12V)
(* You can see it by unscrewing the screw.)
Description
Collect ambient luminosity value, turn
on the infrared light when the current
illuminance is less than 3 Lux.
The working state of the device, long
press 3-5 seconds to restore the
factory, the camera will have a voice
prompt broadcast.
TF card, storage video and playback
video.
Power input
Connect the Lan cable and check the
current device status indicator light
( flashes once /1 s on hotspot mode)
1. Photosensitive
2. Reset button
3. SD card slot
4. DC power supply
5. Network port and
indicator light
APP Download and Installation
Software Installation Wifi Configuration add process
Users can search “EseeCloud” on APP store or “IP PRO” on
Google Play,or scan the QR code below to install the APP.
EseeCloud APP APP download
Note: For iOS system, it requires iOS 9.0 version or above.
For Android,Android 5.1 or above.
Account login
Account login: On the login
interface, enter the account/
phone number/email, and the
corresponding password, and
click the "OK" button to log in.
Third-party login: APP supports
third-party login. Click the
third-party social software icon,
jump to the APP to complete
the authorization and log in.
Interface description
1. Power on the device, wait
for the indicator light to flash
slowly, connect to the IPCXXX
hotspot in the phone settings,
the password is 11111111;
2. Open the APP and
click on the "+" in the
upper right corner to
enter the scan code
interface;
3. Scan the QR code
on the device ;
4. On the search device
interface, click "Add";
5. To view and use via WiFi
or other networks, please
select Remote View;
If there is no network, if
you connect to the camera
at close range, please select
local Direct Connection;
Remote View adding process
Add WIFI mode (optional)
1. Select "Remote View"
to add, connect the device
to WiFi, select the correct
WiFi, enter the password,
and click Confirm;
风琴折，折后净尺寸70x130mm，128克双铜彩印
2
4
5
Reset button
DC power
supply (12V)
Network port and
indicator light
3SD card slot
(* You can see it by unscrewing the screw.)
12345
Fast Installation Manual
Quality . Service . Competitiveness
Before operating this unit,please read these instructions
carefully,and save them for future use.
V1.4
This manual is suitable for various types of cameras.
(The appearance may be different due to different batches. The details
are subject to the receipt.This manual is only for the installation
instructions of this series of equipment.)
1. Wireless Pan-tilt IP Camera
2. WiFi Spot Light Camera
3. WiFi MINI Dome Cmaera
DC power
supply (5V)
4
1
Photosensitive
2
3
Reset button
SD card slot
2
Reset button
4
5
Network port and
indicator light
3SD card slot
1
Photosensitive
DC power
supply (12V)
(* You can see it by unscrewing the screw.)
Description
Collect ambient luminosity value, turn
on the infrared light when the current
illuminance is less than 3 Lux.
The working state of the device, long
press 3-5 seconds to restore the
factory, the camera will have a voice
prompt broadcast.
TF card, storage video and playback
video.
Power input
Connect the Lan cable and check the
current device status indicator light
( flashes once /1 s on hotspot mode)
1. Photosensitive
2. Reset button
3. SD card slot
4. DC power supply
5. Network port and
indicator light
APP Download and Installation
Software Installation Wifi Configuration add process
Users can search “EseeCloud” on APP store or “IP PRO” on
Google Play,or scan the QR code below to install the APP.
EseeCloud APP APP download
Note: For iOS system, it requires iOS 9.0 version or above.
For Android,Android 5.1 or above.
Account login
Account login: On the login
interface, enter the account/
phone number/email, and the
corresponding password, and
click the "OK" button to log in.
Third-party login: APP supports
third-party login. Click the
third-party social software icon,
jump to the APP to complete
the authorization and log in.
Interface description
1. Power on the device, wait
for the indicator light to flash
slowly, connect to the IPCXXX
hotspot in the phone settings,
the password is 11111111;
2. Open the APP and
click on the "+" in the
upper right corner to
enter the scan code
interface;
3. Scan the QR code
on the device ;
4. On the search device
interface, click "Add";
5. To view and use via WiFi
or other networks, please
select Remote View;
If there is no network, if
you connect to the camera
at close range, please select
local Direct Connection;
Remote View adding process
Add WIFI mode (optional)
1. Select "Remote View"
to add, connect the device
to WiFi, select the correct
WiFi, enter the password,
and click Confirm;
风琴折，折后净尺寸70x130mm，128克双铜彩印
2
4
5
Reset button
DC power
supply (12V)
Network port and
indicator light
3SD card slot
(* You can see it by unscrewing the screw.)
12345
Fast Installation Manual
Quality . Service . Competitiveness
Before operating this unit,please read these instructions
carefully,and save them for future use.
V1.4
This manual is suitable for various types of cameras.
(The appearance may be different due to different batches. The details
are subject to the receipt.This manual is only for the installation
instructions of this series of equipment.)
1. Wireless Pan-tilt IP Camera
2. WiFi Spot Light Camera
3. WiFi MINI Dome Cmaera
DC power
supply (5V)
4
1
Photosensitive
2
3
Reset button
SD card slot
2
Reset button
4
5
Network port and
indicator light
3SD card slot
1
Photosensitive
DC power
supply (12V)
(* You can see it by unscrewing the screw.)
Description
Collect ambient luminosity value, turn
on the infrared light when the current
illuminance is less than 3 Lux.
The working state of the device, long
press 3-5 seconds to restore the
factory, the camera will have a voice
prompt broadcast.
TF card, storage video and playback
video.
Power input
Connect the Lan cable and check the
current device status indicator light
( flashes once /1 s on hotspot mode)
1. Photosensitive
2. Reset button
3. SD card slot
4. DC power supply
5. Network port and
indicator light
APP Download and Installation
Software Installation Wifi Configuration add process
Users can search “EseeCloud” on APP store or “IP PRO” on
Google Play,or scan the QR code below to install the APP.
EseeCloud APP APP download
Note: For iOS system, it requires iOS 9.0 version or above.
For Android,Android 5.1 or above.
Account login
Account login: On the login
interface, enter the account/
phone number/email, and the
corresponding password, and
click the "OK" button to log in.
Third-party login: APP supports
third-party login. Click the
third-party social software icon,
jump to the APP to complete
the authorization and log in.
Interface description
1. Power on the device, wait
for the indicator light to flash
slowly, connect to the IPCXXX
hotspot in the phone settings,
the password is 11111111;
2. Open the APP and
click on the "+" in the
upper right corner to
enter the scan code
interface;
3. Scan the QR code
on the device ;
4. On the search device
interface, click "Add";
5. To view and use via WiFi
or other networks, please
select Remote View;
If there is no network, if
you connect to the camera
at close range, please select
local Direct Connection;
Remote View adding process
Add WIFI mode (optional)
1. Select "Remote View"
to add, connect the device
to WiFi, select the correct
WiFi, enter the password,
and click Confirm;
风琴折，折后净尺寸70x130mm，128克双铜彩印
2
4
5
Reset button
DC power
supply (12V)
Network port and
indicator light
3SD card slot
(* You can see it by unscrewing the screw.)
76 8 9 10 11
Warning
In case of fire or lightning,pls don’t put
product in damp and raining place,operate
or maintain according to the user manual.
Be careful when you see attachment with
a Dangerous Voltage which might cause
serious electric accident.
Notice:
1. Ensure your equity,pls read the user manual
carefully before you use the product
2. Pls contact professional people if you need install
and maintain the product
3. Working Environment:temperature of -20°C~+60°C,
relative humidity under 85%
4. Pls don’t exceed the user manual’s standard range
of temperature,humidity and voltage.
Warning
Warning
In case of electric shock and fire,
pls don’t use power supply
beyond power list in user manual
Warning
CAUTION RISK OF ELECTRIC
SHOCK DO NOT OPEN
To reduce electric shock,
unprofessional people
please don’t open product
front panel or rear panel
Direct Connection adding process
1. Select "Direct Connection" to add, and set the name
and password for the device to add successfully;
2. Please wait patiently
during the device
configuration network;
3. The device is successfully
added, please set a name
for the device.
Note: The Direct Connection needs to be connected to the
device hotspot to preview the device screen normally.
When the QR code of the device cannot be found
(or the scan code is unsuccessful)
1. Connect to the IPCXXX
hotspot in the phone settings,
the password is 11111111;
2. Click "Other ways to
add" on the scan code
interface;
3. Select the wireless
standalone camera, and
the subsequent adding
process is the same as the
process of steps "Remote
View " and " Direct
Connection ";
Adding method 1:
1. Scan the QR code of the
device, and click "Add";
2. After setting the name
for the device, it can be
added successfully.
Adding method 2:
Adding method 3:
1. Select "Add by ID/IP"
in "Other ways to add";
2. Enter the device ID
and password, and
click Finish in the upper
right corner to add
successfully.
1. When the mobile phone
and the device are on the
same network, select LAN
scan in "Other ways to add";
2. After searching for the
device, click Add, enter
the device password to
complete the addition.
Wired add configuration process
Note: Power on the device,
connect it to a router with
internet access with a
network cable.
76 8 9 10 11
Warning
In case of fire or lightning,pls don’t put
product in damp and raining place,operate
or maintain according to the user manual.
Be careful when you see attachment with
a Dangerous Voltage which might cause
serious electric accident.
Notice:
1. Ensure your equity,pls read the user manual
carefully before you use the product
2. Pls contact professional people if you need install
and maintain the product
3. Working Environment:temperature of -20°C~+60°C,
relative humidity under 85%
4. Pls don’t exceed the user manual’s standard range
of temperature,humidity and voltage.
Warning
Warning
In case of electric shock and fire,
pls don’t use power supply
beyond power list in user manual
Warning
CAUTION RISK OF ELECTRIC
SHOCK DO NOT OPEN
To reduce electric shock,
unprofessional people
please don’t open product
front panel or rear panel
Direct Connection adding process
1. Select "Direct Connection" to add, and set the name
and password for the device to add successfully;
2. Please wait patiently
during the device
configuration network;
3. The device is successfully
added, please set a name
for the device.
Note: The Direct Connection needs to be connected to the
device hotspot to preview the device screen normally.
When the QR code of the device cannot be found
(or the scan code is unsuccessful)
1. Connect to the IPCXXX
hotspot in the phone settings,
the password is 11111111;
2. Click "Other ways to
add" on the scan code
interface;
3. Select the wireless
standalone camera, and
the subsequent adding
process is the same as the
process of steps "Remote
View " and " Direct
Connection ";
Adding method 1:
1. Scan the QR code of the
device, and click "Add";
2. After setting the name
for the device, it can be
added successfully.
Adding method 2:
Adding method 3:
1. Select "Add by ID/IP"
in "Other ways to add";
2. Enter the device ID
and password, and
click Finish in the upper
right corner to add
successfully.
1. When the mobile phone
and the device are on the
same network, select LAN
scan in "Other ways to add";
2. After searching for the
device, click Add, enter
the device password to
complete the addition.
Wired add configuration process
Note: Power on the device,
connect it to a router with
internet access with a
network cable.
76 8 9 10 11
Warning
In case of fire or lightning,pls don’t put
product in damp and raining place,operate
or maintain according to the user manual.
Be careful when you see attachment with
a Dangerous Voltage which might cause
serious electric accident.
Notice:
1. Ensure your equity,pls read the user manual
carefully before you use the product
2. Pls contact professional people if you need install
and maintain the product
3. Working Environment:temperature of -20°C~+60°C,
relative humidity under 85%
4. Pls don’t exceed the user manual’s standard range
of temperature,humidity and voltage.
Warning
Warning
In case of electric shock and fire,
pls don’t use power supply
beyond power list in user manual
Warning
CAUTION RISK OF ELECTRIC
SHOCK DO NOT OPEN
To reduce electric shock,
unprofessional people
please don’t open product
front panel or rear panel
Direct Connection adding process
1. Select "Direct Connection" to add, and set the name
and password for the device to add successfully;
2. Please wait patiently
during the device
configuration network;
3. The device is successfully
added, please set a name
for the device.
Note: The Direct Connection needs to be connected to the
device hotspot to preview the device screen normally.
When the QR code of the device cannot be found
(or the scan code is unsuccessful)
1. Connect to the IPCXXX
hotspot in the phone settings,
the password is 11111111;
2. Click "Other ways to
add" on the scan code
interface;
3. Select the wireless
standalone camera, and
the subsequent adding
process is the same as the
process of steps "Remote
View " and " Direct
Connection ";
Adding method 1:
1. Scan the QR code of the
device, and click "Add";
2. After setting the name
for the device, it can be
added successfully.
Adding method 2:
Adding method 3:
1. Select "Add by ID/IP"
in "Other ways to add";
2. Enter the device ID
and password, and
click Finish in the upper
right corner to add
successfully.
1. When the mobile phone
and the device are on the
same network, select LAN
scan in "Other ways to add";
2. After searching for the
device, click Add, enter
the device password to
complete the addition.
Wired add configuration process
Note: Power on the device,
connect it to a router with
internet access with a
network cable.
76 8 9 10 11
Warning
In case of fire or lightning,pls don’t put
product in damp and raining place,operate
or maintain according to the user manual.
Be careful when you see attachment with
a Dangerous Voltage which might cause
serious electric accident.
Notice:
1. Ensure your equity,pls read the user manual
carefully before you use the product
2. Pls contact professional people if you need install
and maintain the product
3. Working Environment:temperature of -20°C~+60°C,
relative humidity under 85%
4. Pls don’t exceed the user manual’s standard range
of temperature,humidity and voltage.
Warning
Warning
In case of electric shock and fire,
pls don’t use power supply
beyond power list in user manual
Warning
CAUTION RISK OF ELECTRIC
SHOCK DO NOT OPEN
To reduce electric shock,
unprofessional people
please don’t open product
front panel or rear panel
Direct Connection adding process
1. Select "Direct Connection" to add, and set the name
and password for the device to add successfully;
2. Please wait patiently
during the device
configuration network;
3. The device is successfully
added, please set a name
for the device.
Note: The Direct Connection needs to be connected to the
device hotspot to preview the device screen normally.
When the QR code of the device cannot be found
(or the scan code is unsuccessful)
1. Connect to the IPCXXX
hotspot in the phone settings,
the password is 11111111;
2. Click "Other ways to
add" on the scan code
interface;
3. Select the wireless
standalone camera, and
the subsequent adding
process is the same as the
process of steps "Remote
View " and " Direct
Connection ";
Adding method 1:
1. Scan the QR code of the
device, and click "Add";
2. After setting the name
for the device, it can be
added successfully.
Adding method 2:
Adding method 3:
1. Select "Add by ID/IP"
in "Other ways to add";
2. Enter the device ID
and password, and
click Finish in the upper
right corner to add
successfully.
1. When the mobile phone
and the device are on the
same network, select LAN
scan in "Other ways to add";
2. After searching for the
device, click Add, enter
the device password to
complete the addition.
Wired add configuration process
Note: Power on the device,
connect it to a router with
internet access with a
network cable.
76 8 9 10 11
Warning
In case of fire or lightning,pls don’t put
product in damp and raining place,operate
or maintain according to the user manual.
Be careful when you see attachment with
a Dangerous Voltage which might cause
serious electric accident.
Notice:
1. Ensure your equity,pls read the user manual
carefully before you use the product
2. Pls contact professional people if you need install
and maintain the product
3. Working Environment:temperature of -20°C~+60°C,
relative humidity under 85%
4. Pls don’t exceed the user manual’s standard range
of temperature,humidity and voltage.
Warning
Warning
In case of electric shock and fire,
pls don’t use power supply
beyond power list in user manual
Warning
CAUTION RISK OF ELECTRIC
SHOCK DO NOT OPEN
To reduce electric shock,
unprofessional people
please don’t open product
front panel or rear panel
Direct Connection adding process
1. Select "Direct Connection" to add, and set the name
and password for the device to add successfully;
2. Please wait patiently
during the device
configuration network;
3. The device is successfully
added, please set a name
for the device.
Note: The Direct Connection needs to be connected to the
device hotspot to preview the device screen normally.
When the QR code of the device cannot be found
(or the scan code is unsuccessful)
1. Connect to the IPCXXX
hotspot in the phone settings,
the password is 11111111;
2. Click "Other ways to
add" on the scan code
interface;
3. Select the wireless
standalone camera, and
the subsequent adding
process is the same as the
process of steps "Remote
View " and " Direct
Connection ";
Adding method 1:
1. Scan the QR code of the
device, and click "Add";
2. After setting the name
for the device, it can be
added successfully.
Adding method 2:
Adding method 3:
1. Select "Add by ID/IP"
in "Other ways to add";
2. Enter the device ID
and password, and
click Finish in the upper
right corner to add
successfully.
1. When the mobile phone
and the device are on the
same network, select LAN
scan in "Other ways to add";
2. After searching for the
device, click Add, enter
the device password to
complete the addition.
Wired add configuration process
Note: Power on the device,
connect it to a router with
internet access with a
network cable.
76 8 9 10 11
Warning
In case of fire or lightning,pls don’t put
product in damp and raining place,operate
or maintain according to the user manual.
Be careful when you see attachment with
a Dangerous Voltage which might cause
serious electric accident.
Notice:
1. Ensure your equity,pls read the user manual
carefully before you use the product
2. Pls contact professional people if you need install
and maintain the product
3. Working Environment:temperature of -20°C~+60°C,
relative humidity under 85%
4. Pls don’t exceed the user manual’s standard range
of temperature,humidity and voltage.
Warning
Warning
In case of electric shock and fire,
pls don’t use power supply
beyond power list in user manual
Warning
CAUTION RISK OF ELECTRIC
SHOCK DO NOT OPEN
To reduce electric shock,
unprofessional people
please don’t open product
front panel or rear panel
Direct Connection adding process
1. Select "Direct Connection" to add, and set the name
and password for the device to add successfully;
2. Please wait patiently
during the device
configuration network;
3. The device is successfully
added, please set a name
for the device.
Note: The Direct Connection needs to be connected to the
device hotspot to preview the device screen normally.
When the QR code of the device cannot be found
(or the scan code is unsuccessful)
1. Connect to the IPCXXX
hotspot in the phone settings,
the password is 11111111;
2. Click "Other ways to
add" on the scan code
interface;
3. Select the wireless
standalone camera, and
the subsequent adding
process is the same as the
process of steps "Remote
View " and " Direct
Connection ";
Adding method 1:
1. Scan the QR code of the
device, and click "Add";
2. After setting the name
for the device, it can be
added successfully.
Adding method 2:
Adding method 3:
1. Select "Add by ID/IP"
in "Other ways to add";
2. Enter the device ID
and password, and
click Finish in the upper
right corner to add
successfully.
1. When the mobile phone
and the device are on the
same network, select LAN
scan in "Other ways to add";
2. After searching for the
device, click Add, enter
the device password to
complete the addition.
Wired add configuration process
Note: Power on the device,
connect it to a router with
internet access with a
network cable.
Table of contents
Other GW Security Security Camera manuals
Popular Security Camera manuals by other brands
Angekis
Angekis Saber 4K NDI user manual
Vivotek
Vivotek IP8152 Quick installation guide
D-Link
D-Link Securicam DCS-3415 user manual
Luma Surveillance
Luma Surveillance 310 Series quick start guide
American Dynamics
American Dynamics ADCI625-P221 Configuration and user's guide
Panasonic
Panasonic WV-X4571L Important information
JVC
JVC VN-V26U - Network Camera quick start guide
Clinton Electronics
Clinton Electronics VX20 instruction manual
Planet Networking & Communication
Planet Networking & Communication ICA-E8550 user manual
ACTi
ACTi A41 Hardware manual
Panasonic
Panasonic WVCW474F - COLOR CCTV CAMERA instructions
Asoni
Asoni CAM647 user manual