HAGOR VWS-Cube User manual

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: [phone] | Mail: [e-mail]
Installation manual
VWS-Cube
INSTALLATION AND USE INSTRUCTION
Floor structure videowall
Pag.: 1
Warning
For correct and safe use
This manual contains instructions and drawings for correct and safe use of the product.
Non-compliance with descriptions and drawings and/or improper use of the product could cause the effects specified below.
Please note the following hazard symbols before reading the remainder of this session, and follow the instructions thoroughly.
Danger: any failure in observing these instructions could lead to death or serious injuries.
Warning: any failure in observing these instructions could lead to failure or damage to objects.
Meaning of the symbol: the symbol warns against doing something
Special precautions for safety.
Danger
- Follow the instructions reported in this manual about the installation method. Any failure in observing these instructions could
lead to damage or injuries due to MONITOR set or other objects falling down.
- Please use qualified personnel for installation
- Make sure that the wall where the MONITOR set has to be installed can bear the weight of the MONITOR set itself.
- Do not apply any other weight to the MONITOR set or the bracket. This could make the MONITOR set fall down and cause injuries or damage
to objects.
- Do not change or alter the components for installation. This make the MONITOR set fall down and cause injuries or damage to objects.
Warning
Carry out the installation in places without humidity or dust.
- Do not install the MONITOR screen in places with a high degree of humidity
and dust. This could bring about fire or electric shocks.
- Do not install the MONITOR screen in places where it could get in contact
with fumes or vapours. This could bring about fire or electric shocks.
Carry out the installation in a well vented area.
- Do not obstruct the holes for air passage on the MONITOR screen. This
could bring about fire.
- Do not place the MONITOR set in a poorly vented place.
Please take careful note of the following: use qualified personnel for the installation.
The producer will not bear responsibility for any improper installation or any accident, damage or injury that may come arise from incorrect installation.
DE Installationsanleitung
ES Guía de instalación
GB Installation manual
FR Guide d‘installation
SE Installationsanvisning
TR Yükleme Rehberi
RU инструкция по установке
NL Installatievoorschrift
CN 安装指南

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: [phone] | Mail: [e-mail]
DE
GB
Achtung!
Technische Geräte stellen einen beträchtlichen Wert dar. Sie sollten daher bei
der Installation vorsichtig mit den Komponenten umgehen und diese bei Bedarf
schützen.
Auch sollte, falls nötig, der Installtionsbereich abgesichert werden. Herabfallen-
de Teile können zu Verletzungen und Materialschäden führen.
Die im Lieferumfang enthaltenen Materialien sind unter Umständen nicht für die
speziellen Gegebenheiten am Installationsort geeignet. Bitte prüfen Sie dies
vorab und ersetzen Sie diese bei Bedarf durch geeignete Materialien.
Falls Sie Bezüglich der Installation des Produkts unsicher sind oder noch Fra-
gen haben wenden Sie sich an uns oder anderes ausgebildetes Fachpersonal.
Caution!
Technical devices are of considerable value. You should therefore handle the
components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can cause
injuries and material damage.
The materials included in the scope of delivery may not be suitable for the spe-
cial conditions at the installation site. Please check this in advance and replace it
with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions,
please contact us or other trained specialists.

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: [phone] | Mail: [e-mail]
INSTALLATION AND USE INSTRUCTION
Floor structure videowall
Pag.: 1
Warning
For correct and safe use
This manual contains instructions and drawings for correct and safe use of the product.
Non-compliance with descriptions and drawings and/or improper use of the product could cause the effects specified below.
Please note the following hazard symbols before reading the remainder of this session, and follow the instructions thoroughly.
Danger: any failure in observing these instructions could lead to death or serious injuries.
Warning: any failure in observing these instructions could lead to failure or damage to objects.
Meaning of the symbol: the symbol warns against doing something
Special precautions for safety.
Danger
- Follow the instructions reported in this manual about the installation method. Any failure in observing these instructions could
lead to damage or injuries due to MONITOR set or other objects falling down.
- Please use qualified personnel for installation
- Make sure that the wall where the MONITOR set has to be installed can bear the weight of the MONITOR set itself.
- Do not apply any other weight to the MONITOR set or the bracket. This could make the MONITOR set fall down and cause injuries or damage
to objects.
- Do not change or alter the components for installation. This make the MONITOR set fall down and cause injuries or damage to objects.
Warning
Carry out the installation in places without humidity or dust.
- Do not install the MONITOR screen in places with a high degree of humidity
and dust. This could bring about fire or electric shocks.
- Do not install the MONITOR screen in places where it could get in contact
with fumes or vapours. This could bring about fire or electric shocks.
Carry out the installation in a well vented area.
- Do not obstruct the holes for air passage on the MONITOR screen. This
could bring about fire.
- Do not place the MONITOR set in a poorly vented place.
Please take careful note of the following: use qualified personnel for the installation.
The producer will not bear responsibility for any improper installation or any accident, damage or injury that may come arise from incorrect installation.

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: [phone] | Mail: [e-mail]
INSTALLATION AND USE INSTRUCTION
Floor structure videowall
Pag.: 2
BASE POSITION FRONT MOUNTING
BASE POSITION BACK MOUNTING
For the stability of the stucture, the use of ballast is obligatory (see table).
The rules described above are valid for indoor environments with no wind.
If the assembly is done in areas where there may be wind (eg, air
currents, large ventilation)
is necessary to increase the counterweight in an appropriate and / or
anchor the back part of the structure to a solid wall.
2a
2b
MAX3.5 m MAX3.5 m
Ballast
! ! ! WARNING - DANGER ! ! !
Height (up to) [m] 0.6 1.5 2.15 2.85 3.5 UPPER TO
4.2 [m]
Ballast [kg] 0 40 100 140 220 Contact designer for
specific configuration
BALLAST TABLE

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: [phone] | Mail: [e-mail]
INSTALLATION AND USE INSTRUCTION
Floor structure videowall
Pag.: 3
The structure is verified to ensure
the balance from 0 ° to 8 ° inclination.
STABILITY OF THE STRUCTURE
! ! ! WARNING - DANGER ! ! !
Where necessary for reasons of safety, secure the top of the structure to
a solid wall.
The verification of stability must consider the following external factors:
1 - Strength of the floor
2 - Wind sudden and severe
3 - State of danger arising from contact with people and / or objects. (eg
installations in passageways, emergency exits)
MONITOR HOOK MOUNTING
Mount the hooks (S) on the back of monitor, with the supplied screws
S
3
4
Loose completly the safty screws (D)
D
4.1
4.2

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: [phone] | Mail: [e-mail]
INSTALLATION AND USE INSTRUCTION
Floor structure videowall
Pag.: 4
PCS (N° OF COLUMNS)
CONFIGURATION
5
SEQUENCE OF MOUNTING
6
R1 R2 R3 R4
T
SAMPLE FOR INSTRUCTION
6a

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: [phone] | Mail: [e-mail]
INSTALLATION AND USE INSTRUCTION
Floor structure videowall
Pag.: 5
PCS (N° OF COLUMNS) PCS (N° OF COLUMNS)
6b
PCS (N° NECESSARY)

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: [phone] | Mail: [e-mail]
INSTALLATION AND USE INSTRUCTION
Floor structure videowall
Pag.: 6
PCS (N° COLUMNS X ROWS) PCS (N° COLUMNS X ROWS)
6c
INTERFACE FOR
PANTOGRAPH BRACKET

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: [phone] | Mail: [e-mail]
INSTALLATION AND USE INSTRUCTION
Floor structure videowall
Pag.: 7
6d
PCS (N° NECESSARY)

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: [phone] | Mail: [e-mail]
INSTALLATION AND USE INSTRUCTION
Floor structure videowall
Pag.: 8
PCS (N° COLUMNS X ROWS)
6f

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: [phone] | Mail: [e-mail]
INSTALLATION AND USE INSTRUCTION
Floor structure videowall
Pag.: 9
ADJUSTMENT
Z
Z
S
S
Y
Y
Y
Y
X
Hook the monitors beginning from the bottom. Be careful to keep the knobs (X) between the brackets (S)
Use the (X) and (Z) knob to ensure that distance is at least 1mm between them.
Use the (Y) axis regulation knob to ensure that every corner is alligned with the near monitor.
1
1
7
7.1
7.2
7.3

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: [phone] | Mail: [e-mail]