Haier BD-88DEM User manual

Upright Freezer
Mod l e : BD-88DEM

1
Contents
Safety precautions.......................................................................................................2
Safety instructions and warnings.................................................................................3
Disposal notes .............................................................................................................5
Setting up.....................................................................................................................6
Description...................................................................................................................8
Functions .....................................................................................................................9
Defrosting, Cleaning ...................................................................................................12
Shutting you appliance down.......................................................................................13
Trouble Shooting .........................................................................................................13
Change over door hinges.............................................................................................15
Qingdao Haier Special Freezer Co.,Ltd.
Haier Industrial Park, Economic and Technological
Development Zone, Qingdao, Shandong, China

2 2
8

3
in
order to avoid a hazard.
WARNING:
WARNING:
WARNING:
WARNING:
WARNING
: The appliances are intended to be placed against a wall with a free distance not exceeding 75 mm.
WARNING:
WARNING:
This symbol shows that this appliance uses a flammable refrigerant.
If the refrigerant is leaked and exposed to an external ignition source, there is a risk of fir
e.
Safety instructions and warnings
3

4
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
Since flammable refrigerant and flammable insulation blowing gases used, please contact the
manufacturer, its service agent or similarly qualified persons to dispose of the old appliance in order to
avoid a hazard.

5
Disposal notes
The packaging is made of recyclable materials.
-Corrugated board/board
-EPS moulded part
-Polythene sheets
-Polypropylene straps
Keep packaging material away from children-polythene sheets an bags can
cause suffocation.
Please return the packaging to an official collection point.
Nameplate
The nameplate is located inside the freezer compartment glued low down on
the left side.
The nameplate provides important information about the appliance and must
not be tampered with or removed.
Valid capacity and rated power consumption shown on the nameplate is
subject to relevant standards.
Climate rating
Ambient temperatures
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C
Freezing and storage of fresh food
-Food shall be stored with a space in between, which is good for refrigeration cycle.
-Food shall be stored in different categories sothat you can find more easily.
-Food shall be sealed before srred in the freezer to avoid water loss and smell taint.
-It’s optional to pack food before putting it in the freezer. The outside of the packing
must be dry to avoid bags sticking together.Packing materials should be odor-free,
airtight, non poisonous and non-toxic.
-We suggest to identify portion nothing down information as follow:
Name of food
Quantity(number of pieces)
Freezing date
Limit date of storage
-Do not load excessive quantities of fresh food in the freezer. It is better to refer tothe
freezing capacity of the freezer.
Beers and beverages shall not be stored in the freezer.

6
Setting up
Remove all package parts, the foam base and the adhesive tape fixing
accessories.
Place the freezer in a proper location.
Clean the inside and outside of the freezer before use.
After the appliance has been levelled and cleaned, let it remain idle for at
least 6 hours before switching it on so as to ensure its normal running.
Placing Environment
The freezer should be placed on a flat and solid ground. If the appliance is
placed on a pedestal, flat strong and fire-resistant materials must be used.
Never use the foam packing material as a pedestal.
Never place the freezer in a damp area or location where it may be
splashed with water. Clean and dry any water splashes and stains with soft
cloth in time to prevent rust.
Do not place the freezer where the environment temperature is too low
(under 5℃), do not keep the freezer outdoors or in the rain.
Do not place the freezer under the sunlight directly and keep it away from
heat to ensure the performance of the freezer.
Install the appliance in a well ventilated place and a space at least 10cm
must be kept above and around the freezer.
Feet-adjusting
If the freezer is slightly unstable, you can prolong or shorten the
adjustable feet of the freezer by turning them clockwise or counter
clockwise.
Connecting to the mains
Powere supply(AC) and voltage at the operating point must comply with the
details on the rating plate. Which is located on the freezer compartment.
Connect the appliance with a properly earthed fused plug and socket
GB

7
only.
The socket must be fused with a 10A fuse or higher, it must be away from
the rear of the appliance and must be easily accessible.
Do not connect the appliance to the supply with other equipment using a
distribution outlet-risk of overheating.
When removing the mains cable from the back of the appliance, remove the
cable holder as well so as to avoid vibration noise.

8
Description
This diagram may be slightly different from the layout of the freezer you have
just purchased.
①Operating controls
②Convenient box
③Drawers
④Adjustable height feet
4
3
2
1
FIG.1

9
Functions
Control panel elements
①Function selection button
②Temperature setting button
③Unlocked button
④
⑤Fast-freezing model icon
⑥Freezing temperature display icon
⑦Alarm indicator icon
⑧Button-locked icon
Start up the appliance
Insert the plug in the socket to switch on the freezer. The display will show the
current temperature of the freezer.
If no operation on buttons, display will be off after 30 second, and buttons will
be locked. Press any button ( ①,②,③) to light up the display.
Unlocking the button
The lighting icon means buttons are locked.
Setting the temperature
To set temperature, unlock operation is needed.
The appliance is pre-set for normal operation(-18°C).
When the screen is unlocked, press “Temp. Set”, the temperature
number will flash, additional pressing on this button, the temperature
Breast milk storage model icon
Press “unlocked” button 3 seconds, this icon is off, it means buttons are unlocked.
will decrease 1°C,When the temperature is set at -25°C, press the key again,
the temperature jumps to -7°C, press the key again, the temperature jumps to
-14°C, and then from -14°C to -25°C, according to this cycle. After reaching the
setting temperature, stop pressing, and the temperature will be saved
automatically after 5 second, the number stops flashing, and then the display
shows the current temperature of the freezer.
-7°C Function: set at -7°C, the freezer temperature is maintained at about
-7°C, suitable for short-term storage of fresh meat, fish, curry, grain
and so on.