Haier HUF138PA - ANNEXE 181 User manual

@ @ • @
Whaf The World Comes Home To"
_?r t st e
(Featares may vary by model) ModW#"s
(Le_carad_ri_tlqae_ pevve.t
verier ea {on_:tlonda mod_Je)
(Las fandonespaerJen
varlar _egbn eJmorJeJo}
ModUles
PeteModWosde

S
Read all of #he instructions before using this appliance.
When using this appliance, al_ays e×erdse basic safety
precautions, indudin 9 the Following:
1. Usethis appliance only for its intended purpose as described in this use
and care guide.
2. This appliance mustbe properly installed in accordance with the
installation instructions before it is used. See grounding instructions in the
installation section.
3. This appliance should not be recessedor built into an enclosed cabinet. It
is designed for freestanding installation only.
4. Never unplug your appliance by pulling on the power cord. Always
grasp the plug firmly and pull straight out from the outlet.
5_
6_
7_
8_
end.
of danger to children.
When your freezer is in operation, do not touch the cold surfaces in the
freezer compartment, particularly when hands are damp or wet. Skin
may adhere to these extremely cold surfaces.
reads:
'k_.You may safely refreeze frozen foods that have thawed if they
still contain ice crystals or if they are still cold - bdow 40°F7
"_..Thawedground meats, poultry, or fish that have any off-odor or
off-color should not be refrozen and should not be eaten. Thawed
ice cream should be discarded. If the odor or color of any food is
poor or questionable, discard it. The food may be dangerous to
eat."
much of their eating quality as you can."

9, Do not useany eUectricddevice or any sharp instrument to defrost your
freezen
10, UnpUugyour freezer before cleaning or before making any repdrs,
Note: if for any reason this product requires service, we strongUy
recommend that a certified technician perform the service,
11, Do not operate your freezer in the presence of explosive fumes,
Thank you for using our Haler
prducL This easy-to-use manual will
guide you in getting the best use of
your freezen
Remember to record the model and
serial numben They are on a label in
back of the freezen
Model number
Serial number
Date of purchase
Staple your receipt to your manual, You wiJJ need it to obtclin
warranty service° 2

Unpacking
1. Remove aH packing materials This includes the foam base and aJJadhesive tape
homing the accessories inside and outside_
2. Hnspectand remove any remaining packaging, tape and printed materiaJs before
turning ON the freezen
Note: AJJowthefreezerto stand in an upright positionfor at Jeast24 hoursbefore
turning on the power,if thefreezerhasbeentiJtd for any reason.
Checkto makesurethat theaccessoriesare presentand in good condition. Hfyou
find that theya_ not in good condition or are missing,pJeasecontactour customer
servicedepartmentfor assistance.Our ToJJoFre÷numb÷r is
] o877o337o3639_

\\\©
1. interior Light
2. Cabinet Wire Shelves (quantities vary
per model}
3, Temperature Control Dial
4. Storage Drawers (quantity" varies by
model}
5_ Temperature AJarm indicator Light
6. Power Indicator Light
7. Locking Hate
8. Lock (not shown}
9. Fixed Door SheJves(quantity varies
bymodel}

Proper Location
Toensure that your upright freezer works at the maximum efficiency it was designed
for, you should install it in a location where there is proper air circulation and
dectricd connections,
®Thefreezeris designedfor freestanding installationonly Htshouldnot be
buimtoino
® AJJowa minimum of 2 inch on each side and above the top of the freezer to ease
instaJJationand aJJowproper air circuJation_
Be sure to instaJJyour freezer on a floor that is strong enough to support the unit
when fuJJyJoacJecJ,

Grounding instructions
Forpersonalsafety,thisappliance mustbe properly grounded.In theeventof an
electricalshortcircuit, grounding reducesthe riskof electricshockby providing an
escapewire for theelectricalcurrent.Thisapplianceisequipped with a cord
containinga grounding wire with a grounding plug. Theplug mustbe insertedinto
an outletthat is properly installedand grounded.
®Improperuseof theplug may resultin therisk of electricshock.
Do not, underany circumstances,cutor removethethird (grounding} prong from
thepower cord.
®Consulta qualified electricianor servicecenterif thegrounding instructionsare
notcompletelyunderstoodor if in doubt asto whethertheappliance hasbeen
properly grounded.
Use of Cords
®Avoid the use of an extension cord because of potential safety hazards
under certain conditions. If it is necessary to use an extension cord, use
only a 3-wire extension cord that has a 3-blade grounding plug and a
3-slot outlet that wiJJaccept the plug. The marked rating of the extension
cord must be equal to or greater than the electrical rating of the
appliance.
oIHterr Rtio s
®Occasionally, there may be power interruptions due to thunderstorms or
other causes. Remove the power cord from the AC outlet when a power
outage occurs. When power has been restored, re-plug the power cord
into the AC outlet.

Temperature ¢ontroJ DiaJ (fig. 1)
®ThetemperaturecontroJdid hassettingsfrom "0" to "7" with
"1" being thewarmestand "7" being thecoMesL
fig. 1
hitiaJJy, setthe temperature controJ did at "4"_
®After thefreezer hasbeenturnedON for 24 hours,adjust the
temperaturecontroJdid to thesettingthat bestsuitsyour
needs_
®TurningthetemperaturecontroJdid to "0" wiJJstopthe
coding cyclebutwiJJnot shutOFFthe powen Temperature
Control Did
Note: Hfyou unpJug or turn OFF the freezer, wait at Jeast4 minutes
before restarting or pJugging it in again.
Temperature AJarm System
When turningON your freezer,the temperatureaJarmsystemswitchshouMbe at
the"O" positiom Putit in the "-" position oncethefreezerhasbeenON for a peri-
od of 24 hours_ThetemperatureaJarmisactivatedat 15.8°EOnceactivated,the
buiJtgnaudibJeaJarmsystemwiJJsignaJa warning to you_Thealarm wiJJcontinue
to sounduntiJyou turn OFFthetemperaturealarm switch_A red JightwiJJaJsowarn
you thatthetemperatureaJarmsystemhasbeenactivated.
Lock and Key (fi% 2)
Yourfreezer hasa Jockand key featureto securethecontentsof thefreezendose
thedoor,pushand turn thekey to lock. Pushand turn thekey in theopposite
direction tounlock.
Lockand Key

RepJadngtheLightBulb(fig.3}
Whenreplacingthelightbdb,fallowthestepsbelow:
1_Unplugthefreezen
2.Removetheplasticlightshadelocatedinsidethe
freezerbylightlypressingtotheJeffside.
(seefig_3)
3.Removethelightbulbby"turningit
counter-clockwise. fig_3
4_UseONLYappliancelightbulbwith25-wattsofpowen
5. installa newreplacementlight bulb by turningit clockwise.
& Replacethelight shadeto itsoriginal position.
7. Turnthefreezer powerON to seeif you haveinstalledthelight bulb correctly'.
8_Hfthelight bulb doesnot turnON, repeatthe stepsabove.
Freezer interior Shrives (fig. 4)
Theshelvesof thefreezerwere designedwith you in mind. TheiradiustabiJityin
positionallowsyou to personalizethestoragespacetoyour specificneeds.
Toremoveor adjusta fuji-width, dide-outshelf:
1.Gently tilt the shdf up and dide it towardsyou untiltheshelfhasbeencompJetdy
removed_(seefig_4)
2. Toreplacetheshdf, selectthedesiredsettingand gently dide theshdf back until
it restsin thelocking position.
blote: AJJshrivesare notadjustable.
fig. 4 i _s_i