Haier FCM7SUHWW User manual

2013(HAIER ELECTRICALAPPLIANCES COR. LTD)
©All right reserved. Unauthorized copying and distribution is a violation of law.
Chest Freezer
SERVICE MANUAL
MODEL: FCM7SUHWW
FCM7DUHWW
This service information is designed for experienced repair technicians only and is not designed for use by the general public. It
dose not contain warnings and cautions to advice non-technical individuals of potential dangers in attempting to service a product.
Product powered by electricity should by serviced or repaired only by experienced professional technicians. Any attempt to service
or repair the product or products dealt with in this service information by anyone else could result in serious injury or death.
WARNING

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
2
Issue 2013-09-26
REV Ref1309S003V0
Contents
Chapter 1 General Information..........................................................................................................3
1-1. General Guidelines.................................................................................................................3
1-2. Insurance Test........................................................................................................................3
1-3. How to read this Service Manual............................................................................................4
Chapter 2 Product Feature.................................................................................................................5
2-1. SPECIFICATIONS..................................................................................................................5
2-2. External views ........................................................................................................................7
Chapter 3 Installation, adjustments and maintenance....................................................................8
3-1. Installation..............................................................................................................................8
3-2 Defrosting and Draining...........................................................................................................8
3-3 Cleaning the Freezer...............................................................................................................9
Chapter 4 Disassembly ....................................................................................................................10
4-1. Door assembly (Door, hinge, hinge cover) ...........................................................................10
4-2. Compartment Grill assembly................................................................................................10
4-3. Control panel assembly (Panel, cover board, knob, indicator light)......................................11
4-4. Thermostat assembly...........................................................................................................11
Chapter 5 Control and display system ...........................................................................................12
5-1. Control panel........................................................................................................................12
5-2. Starting the Freezer..............................................................................................................12
Chapter 6 System flow principle .....................................................................................................13
6-1. Refrigeration flow chart.........................................................................................................13
6-2. Refrigeration flow scenograph..............................................................................................14
Chapter 7 Circuit diagram................................................................................................................15
7-1. Brief principle diagram..........................................................................................................15
Chapter 8 Trouble shooting.............................................................................................................16
8-1. Normal phenomena..............................................................................................................16
8-2. Abnormal phenomena ..........................................................................................................18

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
3
Issue 2013-09-26
REV Ref1309S003V0
Chapter 1 General Information
1-1. General Guidelines
When servicing, observe the original lead dress. If a short circuit is found, replace all parts which
have been overheated or damaged by the short circuit. After servicing, see to it that all the protective
devices such as insulation barriers, insulation papers shields are properly installed. After servicing,
make the following leakage current checks to prevent the customer from being exposed to shock
hazards.
1) Leakage Current Cold Check
2) Leakage Current Hot Check
3) Prevention of Electro Static Discharge (ESD) to Electrostatic Sensitive
1-2. Insurance Test
1. Check if there is any leak of current.
2. Cut out the power supply before the repair to avoid an electrical shock hazard.
3. In the case of a live-line test, insulating gloves should be worn to avoid potential electrical shock.
4. Confirm the rated current, voltage and capacity before testing with any kinds of instruments.
5. Watch if the upper door is open when you check something at a lower position.
6. Take out every part in the cabinet before moving the machine, especially things like panels (e.g.
glass shelf).
7. Please wear intact cotton gloves when repair any parts of the evaporator, so that scratches by
the sharp fins can be avoided.
8. If there is a breakdown with the refrigeration system, please surrender the machine to the service
center, else the leaked refrigerant may pollute the atmosphere.
9. The refrigerator use AC of 115V with a frequency of 60Hz.
10. A big fluctuation of voltage may cause a start failure of the refrigerator, a burn-out of the control
panel and compressor, or an abnormal sound from the compressor in operation.
11. Take care not to damage the supply line. Don’t yank at the line; pull the plug out gently from the
receptacle. Don’t press the line under the cabinet or step on it. Take care not to roll on or damage the

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
4
Issue 2013-09-26
REV Ref1309S003V0
supply line when moves the machine from the wall.
12. In the case of leakage of inflammable gases like carbon monoxide, open the door and windows.
Don’t pull out or insert the plugs of the appliance.
13. Don’t touch the refrigeration surface of the freezing compartment when the refrigerator is in
operation, especially when your hand is wet, else you may be glued to the surface.
14. Pull out the plug of power supply during clearance or power outage. Wait at least five minutes to
resume the power supply in order to prevent damage to the compressor caused by continuous restart.
Photo used in this manual
The illustration and photos used in this Manual may not base on the final design of products, which
may differ from your products in some way.
1-3. How to read this Service Manual
Icons are used to attract the attention of the reader to specific information. The meaning of each icon
is described in the table below:
Note:
A “note” provides information that is not indispensable, but may nevertheless be valuable to the
reader, such as tips and tricks.
Caution:
A “caution” is used when there is danger that the reader, through incorrect manipulation, may
damage equipment, loose data, get an unexpected result or has to restart (part of) a procedure.
Warning:
A “warning” is used when there is danger of personal injury.
Reference:
A “reference” guides the reader to other places in this binder or in this manual, where he/she will find
additional information on a specific topic.

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
5
Issue 2013-09-26
REV Ref1309S003V0
Chapter 2 Product Feature
2-1. SPECIFICATIONS
1 Model FCM7SUHWW FCM7DUHWW
Photo
Commercial brand GE GE
Product description Chest Freezer Chest Freezer
2 Capacity
Total Volume (cu. ft.) 7 7
3 Features
Manual Defrost Yes Yes
Adjustable Temperature Control Yes Yes
Kind of coolant R134a R134a
Foaming components C-P C-P
Wrap-Around Condenser Yes Yes
Wrap-Around Evaporator Yes Yes
Defrost Water Drain Yes Yes
Power "On" Light Yes Yes
Lock no yes
Slide out Storage Baskets 2 2
Slide out Storage Baskets Material Wire Wire
Second Level Rail n/a n/a
Divider no yes
4 Economical/Quiet
Insulation (cabinet foam, lid packed) Yes Yes
Cabinet Liner Textured Aluminum Textured Aluminum
5 Appearance
Color Available White White
Handle Rec Rec
6 Weights & Dimensions
Height (in.) A 33 1/4 33 1/4
Width (in.) C 37 37

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
6
Issue 2013-09-26
REV Ref1309S003V0
Depth (in.) D 21-5/8 21-5/8
Product Weight (lbs.) 84 84
Air Clearances Each Side (in.) 3 3
Air Clearances Back (in.) 3 3
Approximate Shipping Weight(lbs) 90 90
Carton Graphics Kraft Kraft
7 Energy
Voltage/Frequency 115V/60Hz 115V/60Hz
Amps 1.7A 1.7A
Max Energy Usage (kwh/yr) 277 277
8 Service
User instruction GB/FR GB/FR









SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
7
Issue 2013-09-26
REV Ref1309S003V0
2-2. External views
Door
Cabinet
Control panel
Drain pipe

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
8
Issue 2013-09-26
REV Ref1309S003V0
Chapter 3 Installation, adjustments and maintenance
3-1. Installation
The freezer should be conveniently located for day-to-day use in a dry well-ventilated room.
Do not install the freezer where the temperature will go below 0°F or above 110°F, because it will not
maintain proper temperatures.
Be sure to install the freezer on a floor strong enough to support it when it is fully loaded.
The freezer must be solidly positioned on the floor if it is to function at its best. Shims may be used to
accomplish this wherever the floor is too uneven. If the place selected for the freezer is damp or moist,
place 2 X 4 s (51 mm X 102 mm) under its entire length to assure adequate support.
If the freezer has been inclined more then 45° position, we need wait 24 hours before
restarting the freezer.
3-2 Defrosting and Draining
In most climates, defrosting will be necessary only about twice a year.
To have the freezer operate most efficiently, do not permit more than 1/2” (13 mm) of frost to
accumulate on the shelves.
To remove frost, scrape with a plastic or wood spatula or scraper.
Do not use an ice pick or sharp-edged instrument as it may damage or scratch the freezer.
Do not use any electrical device in defrosting the freezer.
For Complete Defrosting
1. Turn the temperature control to the OFF position and unplug the freezer.
2. Remove all food and place it in corrugated boxes, insulated bags, picnic coolers, etc. Use towels
and newspapers for insulation as needed.
3. With the door/lid open, use pans of hot water to speed loosening of frost. Remove large pieces
before they melt.
Chest models have a defrost water drain at the front.

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
9
Issue 2013-09-26
REV Ref1309S003V0
4. Sponge excess water from the bottom of the freezer as it collects to prevent over flowing.
5. After defrosting, clean the inside of the freezer.
6. Replace the drain plug inside the cabinet and the cap on the defrost drain. Fold over and dry the
gasket on the hinge side of the lid.
7. Plug in the freezer. Return the temperature control to its previous position and return food to the
freezer.
Water may drip from the back flange of the lid cover during defrosting. This is normal. Ice
builds up in the lid insulation when the lid is open for adding or removing food, and melts during the
defrosting operation.
3-3 Cleaning the Freezer
Outside. Protect the paint finish. The finish on the outside of the freezer is a high quality baked-on
paint finish. With proper care, it will stay new-looking and rust-free for years. Apply a coat of appliance
polish wax when the freezer is new and then at least twice a year. Appliance polish wax also works
well to remove tape residue from freezer surfaces.
Keep the finish clean. Wipe with a clean cloth lightly dampened with appliance polish wax or mild
liquid dishwashing detergent. Dry and polish with a clean, soft cloth. Do not wipe the freezer with a
soiled dishwashing cloth or wet towel. Do not use scouring pads, powdered cleaners, bleach, or
cleaners containing bleach.
Inside. Clean the inside of the freezer at least once a year. We recommend that the freezer be
unplugged before cleaning. If this is not practical, wring excess moisture out of sponge or cloth when
cleaning in the vicinity of switches, lights or controls.
Use warm water and baking soda solution-about a tablespoon of baking soda to a quart of water.
Rinse thoroughly with water and wipe dry. Do not use cleaning powders or other abrasive cleaners.
An open box of baking soda in the freezer will absorb stale freezer odors. Change the box ever y three
months.
Care should be taken in moving the freezer away from the wall. All types of floor coverings can
be damaged particularly cushioned coverings and those with embossed surfaces.

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
10
Issue 2013-09-26
REV Ref1309S003V0
Chapter 4 Disassembly
4-1. Door assembly (Door, hinge, hinge cover)
Unscrew the hinge cover screw with screwdriver, take away the top and bottom cover by pull it, and
then unscrew the screws on the hinge, so the whole hinge could be moved.
4-2. Compartment Grill assembly
Unscrew the two screw of grill; we can take away the grill.
Top hinge cover
Bottom hinge cover

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
11
Issue 2013-09-26
REV Ref1309S003V0
4-3. Control panel assembly (Panel, cover board, knob, indicator light)
Unscrew the compartment grill (refer 4-2), push the panel claw gently with our finger or tools, at the
same time pull panel outside then take away it.
Take away the knob with a sharp-edged tool.
Press the cover board and take it away.
Press two claws on indicator light side and push it from back to front.
4-4. Thermostat assembly
First take off the knob (refer 4-3), Use turnbuckle spanner or acutilingual plier unscrew the turnbuckle,
and then thermostat can be moved from back of panel.
Note: When assembly thermostat we should placed thermostat in originally direction.

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
12
Issue 2013-09-26
REV Ref1309S003V0
3
4
2
5
1
7
6
OFF
Chapter 5 Control and display system
5-1. Control panel
Freezing temperature selection is made by setting the control from 1to 7(coldest).
If we want colder or warmer temperatures, adjust the control one step at a time.
Allow several hours after each one-step adjustment for the freezer temperature to stabilize.
.
Turning the control to the OFF position stops the cooling process but does not shut off
power to the freezer.
5-2. Starting the Freezer
1. Clean the inside of the freezer with a mild solution of baking soda and water
2. Connect cord to power outlet.
3. On models with a Temperature Monitor or High-Temp Alarm Switch, set the switch to the OFF
position.
4. Make sure the temperature control is set at 4.
5. Allow freezer to operate for at least four hours before placing food inside.
6. On models with a Temperature Monitor or High-Temp Alarm Switch, set the switch to the ON
position.

SE
R
Model:
Chap
t
6-1. Re
The refri
g
single-te
m
single te
m
R
VICE
M
FCM7SU
H
t
er 6 S
y
frigerati
o
g
eration s
y
m
perature a
n
m
perature c
o
M
AN
U
H
WW/FCM
7
y
stem
f
o
n flow c
h
y
stem of
d
n
d single-c
o
o
ntrol.
U
AL
7
DUHWW
f
low pri
h
art
d
irect cooli
n
o
ntrol refrig
e
nciple
n
g single-s
y
e
rating syst
e
y
stem coo
l
e
m with one
I
s
R
l
er belong
s
evaporato
r
s
sue 2013-
0
R
EV Ref13
0
s
to the
c
r
s which is
c
0
9-26
0
9S003V0
c
ategory of
c
ontrolled b
y
13
a
y
a

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
14
Issue 2013-09-26
REV Ref1309S003V0
6-2. Refrigeration flow scenograph

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
15
Issue 2013-09-26
REV Ref1309S003V0
Chapter 7 Circuit diagram
7-1. Brief principle diagram

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
16
Issue 2013-09-26
REV Ref1309S003V0
Chapter 8 Trouble shooting
8-1. Normal phenomena
Problem Possible Causes What To Do
Freezer does not
operate or
Power-On Light is
not on
Temperature control in OFF or Min
or 0 position. Move the control to a temperature setting.
Freezer is unplugged. Push the plug completely into the outlet.
The fuse is blown/circuit breaker is
tripped. Replace fuse or reset the breaker
Freezer
starts/stops too
frequently
Door/lid left open. Check to see if package is holding
door/lid open.
Too frequent or too long to door/lid
openings.
Temperature control set too cold. SeeAbout the operation of your freezer
Freezer operates
too long Door/lid left open. Check to see if package is holding
door/lid open.
Too frequent or too long door/lid
openings.
Temperature control set too cold. See About the operation of your freezer
Inadequate air circulation space
around cabinet. See Preparing to install the freezer
Fast Freeze switch is in the ON
position (on some models) See About the operation of your freezer
Noisy operation
or cabinet vibrates Floor may be weak, causing
freezer to vibrate when
compressor is on.
Placing 2 X 4s (51 mm X 102 mm) under
the length of the freezer will help support
it and may reduce vibration.
Cabinet is not positioned solidly on
floor See Preparing to install the freezer Or use shims for uneven floor
Freezer
temperature too
warm
Door/lid left open. Check to see if package is holding
door/lid open.
Too frequent or too long door/lid
openings.

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
17
Issue 2013-09-26
REV Ref1309S003V0
Foods defrosting
Temperature control OFF or Min or
0positions. Move the control to a temperature setting.
Freezer is unplugged. Push the plug completely into the outlet.
The fuse is blown/circuit breaker is
tripped. Replace fuse or reset the breaker
Door/lid left open. Check to see if package is holding
door/lid open.
Too frequent or too long door/lid
openings.
Freezer
temperature too
cold
Temperature control set too cold. See About the operation of your freezer
Fast Freeze switch is in the ON
position or has run for too long (on
some models)
About the operation of your freezer
Moisture forms on
outside of cabinet Not unusual during periods of high
humidity Wipe surface
Interior light does
not work (on some
models)
No power at outlet. Replace fuse or reset the breaker
Freezer is unplugged. Push the plug completely into the outlet.
Light bulb burned out. Replace bulb.
Door/lid wont fully
close by itself Package holding door/lid open.
Slow starting time
after being off Built-in overload product.
Excessive frost
build-up Door/lid left open. Check to see if package is holding
door/lid open.
Too frequent or too long door/lid
openings.
Not unusual during periods of high
humidity

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
18
Issue 2013-09-26
REV Ref1309S003V0
8-2. Abnormal phenomena
8-2-1. No cooling
NO
YES
YES
NO
NO
YES
YES
YES
NO
YES
No cooling
Whether the refrigerator can start Test according to the process of the
refrigerator can not start
Cooling system or drier filter is blocked.
To evacuate and pour the cooling system and
recharge refrigerant again
Whether the temperature of fresh food
compartment do not descend and after a
little minute, it will stop running Exchange the thermostat
Check whether the working current of
compressor is higher than 120% of normal
operating current
If the noise of compressor is loud
Check whether the working current of
compressor is lower than 80% of normal
operating current
The working sound of compressor is small
If compressor can run naturally and
temperature raising of condenser is very
low
If the temperature raising of condenser
and drier filter is very low
Both high-pressure pipe and low-pressure
pipe temperature are same as the ambient
temperature
Refrigerant leak, check and
repair charge refrigerant again.
Compressor defect and change it
YES
YES
YES

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
19
Issue 2013-09-26
REV Ref1309S003V0
8-2-2.Compressor no start
Compressor no working
Check if the home power
is conduct Connect the power
NO
YES
Check if thermostat is set
at “0” YES Adjust thermostat setting position
NO
Check if the thermostat is
normal
Test if the thermostat is normal under power on status:
Method-1: Setting thermostat to coldest position (7 grade), observe if the machine can be
started. If compressor still not start, it means that the thermostat maybe failure.
YES
Check if the PTC starter is
normal?
Test if resistance of PTC starter, if it is ZERO or INFINITE, means the starter is out of
work. For PTC starter, when shake it, it should not have noise, if it has, means the
starter Magnetic Disk burned.
YES
Check if the overload
protector is normal?
1. Measure whether two ends of overload protector is through
using multimeter Ohm grade. Not through means protector is
defective.
2. Measure running current of compressor using clamp-type
tester. If overload protector act when current is normal, means
protector failure and should be replaced.
YES
Check if each connector of PTC
starter overload protector is in
good condition?
Check each connectors of the PTC starter and overload
protector, ensure each contact is in good condition,
then power on and retest the machine.
NOT NORMAL Compressor
accessories
failure
Compressor
accessories
failure
NOT NORMAL

SERVICE MANUAL
Model: FCM7SUHWW/FCM7DUHWW
20
Issue 2013-09-26
REV Ref1309S003V0
YES
Check if the compressor is
normal ?
YES
Check if the starting current of
compressor excess too much?
Test the resistance parameter of the compressor; if it
is ZERO, inner winding is short circuit. If it is
infinite, inner winding is break circuit
If all technical parameter of compressor and
compressor accessories (PTC starter, overload
protector, run capacitor) are normal after above test,
but compressor still can not be started, and overload
protector action, the actual starting current excess
too much. This phenomenon usually caused by
compressor inner mechanical failure (cylinder-block
or axis-hung problem).