Haier HVF160WH2 Mounting instructions

English
FROST FREE VERTICAL FREEZER
Installation Instructions and User Guide
Model:HVF160WH2
HVF160SS2

English
2
ELEMENTS
Thanks for purchasing a Haier Product
Please read these instructions carefully before using this appliance. The instructions contain
important information which will help you get the best out of the appliance and ensure safe and
proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper use
of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure you
also pass on this manual so that the new owner can become familiar with the appliance and
safety warnings.

English
3
INDEX
Caution..............………………………………………………………………………………………4
Before Use
……………………………………………………………………………………………7
Functions
………………………………………………………………………………………………9
Maintenance
…………………………………………………………………………………………10
Trouble-Shooting ……………………………………………………………………………………11

English
4

English
5

English
6
It is hazardous for anyone other than an Authorised Service Person to service this appliance.
In Queensland – the authorized Service Person MUST hold a Gas Work Licence or
Authorisation for hydrocarbon refrigerants, to carry out Servicing or repairs which involve
the removal of covers.

English
7
BEFORE USE
Description
This diagram may differ slightly different from the layout of the freezer you have just purchased.
Fan
Shelf
Drawer
R600a REFRIGERANT
This appliance contains a small quantity but flammable, non-synthetic R600a refrigerant:
Upon opening and installing your product, check that the tubing of the refrigerant circuit is
not damaged during transportation.
Leaking refrigerant may cause eye injuries orignite.
The room for installing appliance The room for installing appliance must be at least 1m3 per
8g of refrigerant. The amount of refrigerant in the appliance can be found on the rating plate
the back of the unit.
Keep ventilation openings in the appliance enclosure or in the built-in structure clear of
obstruction.
Do not damage the refrigeration circuit.
If your are unsure of the refrigerant type check the rating plate on the back of the unit.
Do not use mechanical devices or other means to accelerate the defrosting process, other
than those recommended by the manufacturer.

English
8
BEFORE USE
The freezer should be placed on a flat and solid surface.If the appliance is placed on a
pedestal, flat strong and fire resistant materials must be used. Never use the foam packing
material as a pedestal. If the freezer by turning them clockwise or counterclockwise to
increase or decrease the height of the freezer. Do not pace the freezer in direct sunlight or
in a place where it is exposed to external heating source, this will ensure the optimum
performance of the Freezer. Install the appliance in a well ventilated place and a space of at
least 100mm must be kept above the freezer 20mm space on each side, and 50mm behind
the freezer.
Never place the freezer in a damp area or location where it may be splashed with water.
Clean and dry water splashes and stains with soft cloth immediately to prevent rust.
Do not place the freezer where the temperatures is too low(under 5℃). Do not operate freezer
outside.
Preparation prior to use
Remove all package parts, the foam base and the adhesive tape fixing accessories.
Place the freezer in location (please refer to Placing Environment).
Clean the inside and outside of the freezer before use(please refer to Defrosting and Cleaning)
After the appliance has been leveled and cleaned, let it stand for 10-30 minutes before switching
it on.
Opeartion Your Freezer
1. Remove all package parts, Place the freezer in location (please refer to Placing Enviroment).
2. Clean the freezer, Clean the inside and outside of the freezer before use (please refer to
Defrosting and Cleaning).
3. After the appliance has been leveled and before switching on let it stand for at least 30
mintues before switching it on so as to ensure refrigerant oil has settled.
4. Insert the plug in the socket and switch the freezer on, when the freezer is running the
sides of the cabinet may feel warm. Before loading food allow the appliance to run empty
for 6 hours to allow the compartment to cool.
Note: Do not block off vents inside the freezer and leave space around items stored in the
freezer as this will allow the freezer to freeze items quicker and allow the freezer to
operate more efficiently.
Environment

English
9
FUNCTIONS
The Temperature control is positioned the back of freezer compartment. Your freezer will
automatically maintain the temperature level you select. The temperature control dial has
settings as pictured below:
1. Temperature will be warmer when set near the “Min.”, and will
be colder when set near the “Max.”
2. When set to "Max.",the compressor run times will be increased.
If left your power consumption will besignificantly increased.
3. The dial is factory set to the mid setting.

English
10
MAINTENANCE

English
11
TROUBL-SHOOTING

English
12
TROUBLE-SHOOTING