Haier 75UF5550B User manual

Haier
Haier
Haier
Haier
SERVICE
SERVICE
SERVICE
SERVICE MANUAL
MANUAL
MANUAL
MANUAL
L
L
L
L E
E
E
E D
D
D
D TV
TV
TV
TV
Model
Model
Model
Model No.
No.
No.
No. 75UF5550
75UF5550
75UF5550
75UF5550
MSD3458
MSD3458
MSD3458
MSD3458
Chassis
Chassis
Chassis
Chassis
WARNING
WARNING
WARNING
WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair
the product or products dealt with in this service information by anyone else could result in serious injury or death.
© 201 3 Qingdao Haier Electronics Co., Ltd.
All rights reserved. Unauthorized copying and distribution is a violation of law.

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
CONTENTS
CONTENTS
CONTENTS
CONTENTS
Chapter
Chapter
Chapter
Chapter 1.
1.
1.
1. General
General
General
General Information
Information
Information
Information
1-1.
1-1.
1-1.
1-1. Document
Document
Document
Document Information
Information
Information
Information ............................................................
............................................................
............................................................
............................................................ ..
..
..
.. 3
3
3
3
1-2.
1-2.
1-2.
1-2. General
General
General
General Guidelines...................................................................
Guidelines...................................................................
Guidelines...................................................................
Guidelines................................................................... ..
..
..
.. 3
3
3
3
1-3.
1-3.
1-3.
1-3. Important
Important
Important
Important Notice.......................................................................
Notice.......................................................................
Notice.......................................................................
Notice....................................................................... ..
..
..
.. 3
3
3
3
1-3-1. Follow the regulations and warnings ..................................................... 3
1-3-2. Be careful to the electrical shock ........................................................... . 3
1-3-3. Electro static discharge (ESD)............................................................... . 3
1-3-4. About lead free solder (PbF).................................................................. . 4
1-3-5. Use the genewing parts (speci  ed parts) .............................................. 4
1-3-6 Safety check after repairment................................................................. 4
1-3-7. Ordering Spare Parts............................................................................. 6
1-3-8. Photo used in this manual .....................................................................6
1-4.
1-4.
1-4.
1-4. How
How
How
How to
to
to
to Read
Read
Read
Read this
this
this
this Service
Service
Service
Service Manual
Manual
Manual
Manual ...........................................
...........................................
...........................................
........................................... .
.
.
. 6
6
6
6
Using icons .............................................................................................................. . 6
Chapter
Chapter
Chapter
Chapter 2.
2.
2.
2. Speci
Speci
Speci
Speci 


 cation
cation
cation
cation
2-1.
2-1.
2-1.
2-1. Speci
Speci
Speci
Speci 


 cation
cation
cation
cation list.......................................................................
list.......................................................................
list.......................................................................
list....................................................................... ..
..
..
.. 8
8
8
8
2-2.
2-2.
2-2.
2-2. External
External
External
External pictures
pictures
pictures
pictures (four
(four
(four
(four faces).................................................
faces).................................................
faces).................................................
faces)................................................. ...
...
...
... 9
9
9
9
Chapter
Chapter
Chapter
Chapter 3.
3.
3.
3. Disassemble
Disassemble
Disassemble
Disassemble and
and
and
and Assemble
Assemble
Assemble
Assemble
3-1.
3-1.
3-1.
3-1. 75UF5550
75UF5550
75UF5550
75UF5550 .................................................................................11
.................................................................................11
.................................................................................11
.................................................................................11
3-1-1. Remove the Stand.......................................................... ................ ..... .. 11
3-1-2. Remove the Back Cabinet ................................................. .................. .11
3-1-3. Remove the Mainboard....................................................... .................. 11
3-1-4. Remove the Power Supply Module ................................... ................... 11
3-1-5. Remove the Speaker........................................................... .................. 11
3-1-6. Remove the Remote Control Board .................................. ................... 12
3-1- 7 . Remove the Key Board....................................................... .................. 12
Chapter
Chapter
Chapter
Chapter 4.
4.
4.
4. Location
Location
Location
Location of
of
of
of Controls
Controls
Controls
Controls and
and
and
and Components
Components
Components
Components
4-1.
4-1.
4-1.
4-1. Board
Board
Board
Board Location
Location
Location
Location .......................................................................
.......................................................................
.......................................................................
....................................................................... ..
..
..
.. 13
13
13
13
4-2.
4-2.
4-2.
4-2. Mainboard
Mainboard
Mainboard
Mainboard ...............................................................................
...............................................................................
...............................................................................
............................................................................... ..
..
..
.. 14
14
14
14
4-2-1. Function Description .............................. ................... ............................14
4-2-2. Connector de  nition ........................................... ................... ................14
4-3.
4-3.
4-3.
4-3. Power
Power
Power
Power Supply
Supply
Supply
Supply Module
Module
Module
Module ............................................................
............................................................
............................................................
............................................................ ..
..
..
.. 15
15
15
15
4-3-1. Function Description ........................................................ ................... ..15
1
1
1
1

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
4-3-2. Connector de  nition .................................................... .................. ....... . 15
4-4.
4-4.
4-4.
4-4. LCD
LCD
LCD
LCD Panel
Panel
Panel
Panel ...............................................................................
...............................................................................
...............................................................................
............................................................................... ...
...
...
... 16
16
16
16
Chapter
Chapter
Chapter
Chapter 5.
5.
5.
5. Installation
Installation
Installation
Installation Instructions
Instructions
Instructions
Instructions
5-1.
5-1.
5-1.
5-1. Accessories
Accessories
Accessories
Accessories ............................................................................
............................................................................
............................................................................
............................................................................ ..
..
..
.. 18
18
18
18
5-2.
5-2.
5-2.
5-2. External
External
External
External Equipment
Equipment
Equipment
Equipment Connections.........................................
Connections.........................................
Connections.........................................
Connections......................................... ...
...
...
... 19
19
19
19
Chapter
Chapter
Chapter
Chapter 6.
6.
6.
6. Operation
Operation
Operation
Operation Instructions
Instructions
Instructions
Instructions
6-1.
6-1.
6-1.
6-1. Front
Front
Front
Front Panel
Panel
Panel
Panel Controls..............................................................
Controls..............................................................
Controls..............................................................
Controls.............................................................. ...
...
...
... 20
20
20
20
6-2.
6-2.
6-2.
6-2. Back
Back
Back
Back Panel
Panel
Panel
Panel Controls
Controls
Controls
Controls ..............................................................
..............................................................
..............................................................
.............................................................. ...
...
...
... 21
21
21
21
6-3.
6-3.
6-3.
6-3. Setting
Setting
Setting
Setting Up
Up
Up
Up Your
Your
Your
Your Remote
Remote
Remote
Remote Control
Control
Control
Control .........................................
.........................................
.........................................
......................................... ....
....
....
.... 22
22
22
22
Chapter
Chapter
Chapter
Chapter 7.
7.
7.
7. Electrical
Electrical
Electrical
Electrical Parts
Parts
Parts
Parts
7-1.
7-1.
7-1.
7-1. Block
Block
Block
Block Diagram
Diagram
Diagram
Diagram .
.
.
. .......................................................................
.......................................................................
.......................................................................
....................................................................... ....
....
....
.... 23
23
23
23
7-2.
7-2.
7-2.
7-2. Circuit
Circuit
Circuit
Circuit Diagram.......................................................................
Diagram.......................................................................
Diagram.......................................................................
Diagram....................................................................... ...30
...30
...30
...30
Chapter
Chapter
Chapter
Chapter 8.
8.
8.
8. Measurements
Measurements
Measurements
Measurements and
and
and
and Adjustments
Adjustments
Adjustments
Adjustments
8-1.
8-1.
8-1.
8-1. Service
Service
Service
Service Mode
Mode
Mode
Mode ..........................................................................
..........................................................................
..........................................................................
.......................................................................... ..31
..31
..31
..31
8-1-1.How to enter into Service Mode............................................................ 31
8-1-2.How to exit ............................................................................................ 31
8-2.
8-2.
8-2.
8-2. Measurements
Measurements
Measurements
Measurements and
and
and
and Adjustments
Adjustments
Adjustments
Adjustments ..........................................
..........................................
..........................................
.......................................... ..31
..31
..31
..31
8-2-1. The Main Menu .................................................................................... 31
8-2-2. General Setting .............................................................................. .. .... 32
8-2-3. Picture ................................................................................. ........ ......... 32
8-2-4. Sound ............................................................... ................................ .... 33
8-2-5. Debug ................................................................................... ............. ... 33
8-3.
8-3.
8-3.
8-3. Software
Software
Software
Software Update
Update
Update
Update .....................................................................
.....................................................................
.....................................................................
..................................................................... .34
.34
.34
.34
8-3-1. T.VST59 software update .................................................................... 34
Chapter
Chapter
Chapter
Chapter 9.
9.
9.
9. Trouble
Trouble
Trouble
Trouble shooting
shooting
shooting
shooting
9-1.
9-1.
9-1.
9-1. Simple
Simple
Simple
Simple check
check
check
check ..........................................................................
..........................................................................
..........................................................................
.......................................................................... .35
.35
.35
.35
9-2.
9-2.
9-2.
9-2. Mainboard
Mainboard
Mainboard
Mainboard IC
IC
IC
IC Introduction.....................................................
Introduction.....................................................
Introduction.....................................................
Introduction..................................................... .38
.38
.38
.38
9-3.
9-3.
9-3.
9-3. Mainboard
Mainboard
Mainboard
Mainboard Failure
Failure
Failure
Failure Check.......................................................
Check.......................................................
Check.......................................................
Check....................................................... .39
.39
.39
.39
9-4.
9-4.
9-4.
9-4. Pannel
Pannel
Pannel
Pannel Failure.........................................................................
Failure.........................................................................
Failure.........................................................................
Failure......................................................................... .45
.45
.45
.45
2
2
2
2

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
Chapter
Chapter
Chapter
Chapter 1.
1.
1.
1. General
General
General
General Information
Information
Information
Information
1-1.
1-1.
1-1.
1-1. Document
Document
Document
Document Information
Information
Information
Information
Document format: Adobe PDF
Author: Gao Bingbing
Compiler:
1-2.
1-2.
1-2.
1-2. General
General
General
General Guidelines
Guidelines
Guidelines
Guidelines
When servicing, observe the original lead dress. If a short circuit is found, replace all parts which
have been overheated or damaged by the short circuit.
After servicing, see to it that all the protective devices such as insulation barriers, insulation papers
shields are properly installed.
After servicing, make the following leakage current checks to prevent the customer from being
exposed to shock hazards.
1) Leakage Current Cold Check
2) Leakage Current Hot Check
3) Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive
1-3.
1-3.
1-3.
1-3. Important
Important
Important
Important Notice
Notice
Notice
Notice
1-3-1. Follow the regulations and warnings
Most important thing is to list up the potential hazard or risk for the service personnel to open
the units and disassemble the units. For example, we need to describe properly how to avoid the
possibility to get electrical shock from the live power supply or charged electrical parts (even the
power is off).
This symbol indicates that high voltage is present inside.It is dangerous to make any
king of contact with any inside part of this product.
This symbol indicates that there are important operating and maintenance instructions
in the literture accompanying the appliance.
1-3-2. Be careful to the electrical shock
To prevent damage which might result in electric shock or  re, do not expose this TV set to rain
or excessive moisture. This TV must not be exposed to dripping or splashing water, and objects
 lled with liquid, such as vases, must not be placed on top of or above the TV.
1-3-3. Electro static discharge (ESD)
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such
3
3
3
3

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
components commonly are called Electrostatically Sensitive (ES) Devices. The following
techniques should be used to help reduce the incidence of component damage caused by
electros static discharge (ESD).
Electrostatically
Electrostatically
Electrostatically
Electrostatically Sensitive
Sensitive
Sensitive
Sensitive (ES)
(ES)
(ES)
(ES) Devices
Devices
Devices
Devices
Some semiconductor (solid-state) devices can be damaged easily by static electricity. Such
components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical
ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"
components. The following techniques should be used to help reduce the ncidence of component
damage caused by static by static electricity.
1. Immediately before handling any semiconductor component or semiconductor-equipped
assembly, drain off any electrostatic charge on your body by touching a known earth ground.
Alternatively, obtain and wear a commercially available discharging wrist strap device, which
should be removed to prevent potential shock reasons prior to applying power to the unit under
test.
2. After removing an electrical assembly equipped with ES devices, place the assembly on a
conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of
the assembly.
1-3-4. About lead free solder (PbF)
This product is manufactured using lead-free solder as a part of a movement within the
consumer products industry at large to be environmentally responsible. Lead-free solder must be
used in the servicing and repairing of this product.
1-3-5. Use the genewing parts (speci  ed parts)
Special parts which have purposes of  re retardant (resistors), high-quality sound (capacitors),
low noise (resistors), etc. are used.
When replacing any of components, be sure to use only manufacture's speci  ed parts shown in
the parts list.
Safety
Safety
Safety
Safety Component
Component
Component
Component
● Components identi  ed by mark have special characteristics important for safety.
1-3-6 Safety check after repairment
Con  rm that the screws, parts and wiring which were removed in order to service are put in the
original positions, or whether there are the positions which are deteriorated around the serviced
places serviced or not. Check the insulation between the antenna terminal or external metal and
the AC cord plug blades. And be sure the safety of that.
General
General
General
General Servicing
Servicing
Servicing
Servicing Precautions
Precautions
Precautions
Precautions
4
4
4
4

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
1. Always unplug the receiver AC power cord from the AC power source before:
a. Removing or reinstalling any component, circuit board module or any other receiver
assembly.
b. Disconnecting or reconnecting any receiver electrical plug or other electrical connection.
c. Connecting a test substitute in parallel with an electrolytic capacitor in the receiver.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
A wrong part substitution or incorrect polarity installation of electrolytic capacitors
may result in an explosion hazard.
2. Test high voltage only by measuring it with an appropriate high voltage meter or other voltage
measuring device (DVM, FETVOM, etc) equipped with a suitable high voltage probe.
Do not test high voltage by "drawing an arc".
3. Do not spray chemicals on or near this receiver or any of its assemblies.
4. Unless specified otherwise in this service manual, clean electrical contacts only by applying
the following mixture to the contacts with a pipe cleaner, cotton-tipped stick or comparable non-
abrasive applicator; 10% (by volume) Acetone and 90% (by volume) isopropyl alcohol (90%-99%
strength).
CAUTION:
CAUTION:
CAUTION:
CAUTION:
This is a  ammable mixture.
Unless speci  ed otherwise in this service manual, lubrication of contacts is not required.
Capacitors may result in an explosion hazard.
5. Do not defeat any plug/socket B+ voltage interlocks with which receivers covered by this
service manual might be equipped.
6. Do not apply AC power to this instrument and/or any of its electrical assemblies unless all
solid-state device heat sinks are correctly installed.
7. Always connect the test receiver ground lead to the receiver chassis ground before connecting
the test receiver positive lead.
Always remove the test receiver ground lead last. Capacitors may result in an explosion
hazard.
8. Use with this receiver only the test  xtures speci  ed in this service manual.
CAUTION:
CAUTION:
CAUTION:
CAUTION: Do not connect the test  xture ground strap to any heat sink in this receiver.
9. Remove the antenna terminal on TV and turn on the TV.
10. Insulation resistance between the cord plug terminals and the eternal exposure metal should
be more than Mohm by using the 500V insulation resistance meter.
11. If the insulation resistance is less than M ohm, the inspection repair should be required.
If you have not the 500V insulation resistance meter, use a Tester. External exposure metal:
Antenna terminal Headphone jack.
5
5
5
5

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
12. Use only a grounded-tip soldering iron to solder or unsolder ES devices.
13. Use only an anti-static type solder removal device. Some solder removal devices not
classi  ed as "anti-static" can generate electrical charges suf  cient to damage ES devices.
14. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to
damage ES devices.
15. Do not remove a replacement ES device from its protective package until immediately
before you are ready to install it.
(Most replacement ES devices are packaged with leads electrically shorted together by
conductive foam, aluminum foil or comparable conductive material).
16. Immediately before removing the protective material from the leads of a replacement ES
device, touch the protective material to the chassis or circuit assembly into which the device will
be installed.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Be sure no power is applied to the chassis or circuit, and observe all other safety
precautions.
17. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise
harmless motion such as the brushing together of your clothes fabric or the lifting of your foot
from a carpeted  oor can generate static electricity suf  cient to damage an ES device.)
1-3-7. Ordering Spare Parts
Please include the following informations when you order parts. (Particularly the Version letter)
1. Model number, serial number and software version
The model number and serial number can be found on the back cover of each product. Software
version can be found in the Spare Parts List.
2. Spare part No. and description
Spare part No. and description can be found in the Spare Parts List.
1-3-8. Photo used in this manual
The illustration and photos used in this Service Manual may not base on the final design of
products, which may differ from your products in some way.
1-4.
1-4.
1-4.
1-4. How
How
How
How to
to
to
to Read
Read
Read
Read this
this
this
this Service
Service
Service
Service Manual
Manual
Manual
Manual
Using icons
Icons are used to attract the attention of the reader to speci  c information. The meaning of each
icon is described in the table below:
Note:
A “ note ” provides information that is not indispensable, but may nevertheless be
valuable to the reader, such as tips and tricks.
6
6
6
6

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
Caution:
Caution:
Caution:
Caution:
A “ caution ” is used when there is danger that the reader, through incorrect
manipulation, may damage equipment, loose data, get an unexpected result or has to
restart(part of) a procedure.
Warning:
Warning:
Warning:
Warning:
A “ warning ” is used when there is danger of personal injury.
Reference:
Reference:
Reference:
Reference:
A “ reference ” guides the reader to other places in this binder or in this manual, where
he/she will  nd additional information on a speci  c topic.
7
7
7
7

Model
Model
Model
Model 75UF5550
Screen Size 75 "
Aspect Ratio 16:9
Resolution 3840 x 2160
Brightness (cd/m ² ) 300
Contrast 35 00:1
Response Time (ms) 6.5
Angel of View H:1 70 ° , V:1 70 °
Color Display 1.07G
OSD Language
English , Arabic, farsi ,French
, Portuguese ,Russian .
,French, .
Color System PAL/SECAM
Audio System BG/DK/L/I
Audio Output Power (Built-in) (W) 10 W × 2
Audio Output Power (outer) (W) No
Total Power Input (W) 350 W
Voltage Range (V) AC1 0 0V~240V
Power Frequency (Hz) 50~60Hz
Time of Sleep Timer (MINS) 240Min
Net Weight (KG) 30.3
Gross Weight (KG) 31.3
Net Dimension (MM) 1685x973x84mm
Packaged Dimension (MM) 1923x322x1210mm
Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
Chapter
Chapter
Chapter
Chapter 2.
2.
2.
2. Speci
Speci
Speci
Speci 


 cation
cation
cation
cation
2-1.
2-1.
2-1.
2-1. Speci
Speci
Speci
Speci 


 cation
cation
cation
cation list
list
list
list
8
8
8
8

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
2-2.
2-2.
2-2.
2-2. External
External
External
External pictures
pictures
pictures
pictures (four
(four
(four
(four faces)
faces)
faces)
faces)
Front
Front
Front
Front Side
Side
Side
Side
Up
Up
Up
Up Side
Side
Side
Side
9
9
9
9

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
Right
Right
Right
Right Side
Side
Side
Side
Back
Back
Back
Back Side
Side
Side
Side
10
10
10
10

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
Chapter
Chapter
Chapter
Chapter 3.
3.
3.
3. Disassemble
Disassemble
Disassemble
Disassemble and
and
and
and Assemble
Assemble
Assemble
Assemble
3-1.
3-1.
3-1.
3-1. 75UF5550
75UF5550
75UF5550
75UF5550
3-1-1. Remove the Stand 3-1-3. Remove the Mainboard and 6M60 Board
1. Remove the eight screws .
2. Remove the Mainbord and 6M60 Board.
1. Lay down the TV set .
2. Remove the four screws from the stand which
in the picture above.
3. Remove the stand.
3-1-4. Remove the Power Supply Module
3-1-2. Remove the Back Cabinet
1. Remove the four screws.
2. Remove the Power Supply Module.
3-1-5. Remove the Speaker
Remove the Speaker indicated by red circle in
below picture.
1.Remove the thirteen screws .
2. Flip machine, panel side up.
3.Carefully raise the Front shell from
bottom.
11
11
11
11

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
3-1-6. Remove the Remote Control Board And the Key Board
Remove the Remote Control Board and the Key Board indicated by
red circle in below picture.
12
12
12
12

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
Chapter
Chapter
Chapter
Chapter 4.
4.
4.
4. Location
Location
Location
Location of
of
of
of Controls
Controls
Controls
Controls and
and
and
and Components
Components
Components
Components
4-1.
4-1.
4-1.
4-1. Board
Board
Board
Board Location
Location
Location
Location
13
13
13
13
No.
No.
No.
No. Parts
Parts
Parts
Parts Type
Type
Type
Type Description
Description
Description
Description
A Board HKL-750203 Power board
B Board T.MS3458.U801 Main board
C Board PL.MS6M60.1 6M60 board
D Panel SAMSUNG LSC750FF01 LED Panel
D Panel
B Main Board
A Power Board
C 6M60 Board

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
4-2.
4-2.
4-2.
4-2. Mainboard
Mainboard
Mainboard
Mainboard
4-2-1.
4-2-1.
4-2-1.
4-2-1. Function
Function
Function
Function Description
Description
Description
Description
Process signal which incept from exterior equipment then translate into signal that panel can
display.
4-2-2.
4-2-2.
4-2-2.
4-2-2. Connector
Connector
Connector
Connector de
de
de
de 


 nition
nition
nition
nition
14
14
14
14
IR
IR
IR
IR &
&
&
& Key
Key
Key
Key Interface
Interface
Interface
Interface
CND1
CND1
CND1
CND1
Pin
Pin
Pin
Pin number
number
number
number Signal
Signal
Signal
Signal name
name
name
name
1
5V
2 RED
3 GRE
4 IR
5 GND
6 K0
7 K1
8 K2
9 K3
10 K4
11 K5
12 K6
13 K7
14 GND
Inverter
Inverter
Inverter
Inverter connector
connector
connector
connector CND2
CND2
CND2
CND2
Pin
Pin
Pin
Pin number
number
number
number Signal
Signal
Signal
Signal name
name
name
name
1
12V
2
12V
3
BLO
4
ADJ
5
GND
6
GND
Speaker
Speaker
Speaker
Speaker connector
connector
connector
connector CNA3
CNA3
CNA3
CNA3
Pin
Pin
Pin
Pin number
number
number
number Signal
Signal
Signal
Signal name
name
name
name
1
ROUT+
2 ROUT-
3 LOUT-
4 LOUT+

LED
LED
LED
LED driver
driver
driver
driver connector
connector
connector
connector
C
C
C
C ON5/6
ON5/6
ON5/6
ON5/6
Pin
Pin
Pin
Pin number
number
number
number Signal
Signal
Signal
Signal name
name
name
name
1 +
2 -
Backlight
Backlight
Backlight
Backlight adjust
adjust
adjust
adjust connector
connector
connector
connector
C
C
C
C ON2
ON2
ON2
ON2
1 BL_ON
2 ADJ
3 GND
AMP
AMP
AMP
AMP power
power
power
power connector
connector
connector
connector C
C
C
C O
O
O
O N4
N4
N4
N4
1 GND
2 GND
3 VCC
4 VCC
Mainboard
Mainboard
Mainboard
Mainboard power
power
power
power supply
supply
supply
supply
connector
connector
connector
connector CON3
CON3
CON3
CON3
Pin
Pin
Pin
Pin number
number
number
number Signal
Signal
Signal
Signal name
name
name
name
1 12V
2 12 V
3 GND
4 GND
5 5V
6 5V
7 GND
8 GND
9 STB
10 5VSB
Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
4-3.
4-3.
4-3.
4-3. Power
Power
Power
Power Supply
Supply
Supply
Supply Module
Module
Module
Module
4-3-1.
4-3-1.
4-3-1.
4-3-1. Function
Function
Function
Function Description
Description
Description
Description
To supply power for Mainboard, Panel.
4-3-2.
4-3-2.
4-3-2.
4-3-2. Connector
Connector
Connector
Connector de
de
de
de 


 nition
nition
nition
nition
CON
CON
CON
CON 5
5
5
5
CON
CON
CON
CON 6
6
6
6
CON4
CON4
CON4
CON4
CON2
CON2
CON2
CON2
CON1
CON1
CON1
CON1 CON3
CON3
CON3
CON3
C
C
C
C O
O
O
O N
N
N
N 1
1
1
1 is
is
is
is the
the
the
the Power
Power
Power
Power cord
cord
cord
cord connector
connector
connector
connector .
.
.
.
15
15
15
15

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
4-4.
4-4.
4-4.
4-4. LCD
LCD
LCD
LCD Panel
Panel
Panel
Panel
75UF5550
75UF5550
75UF5550
75UF5550
Backlight
Backlight
Backlight
Backlight Unit
Unit
Unit
Unit
LVDS
LVDS
LVDS
LVDS CONNECTOR
CONNECTOR
CONNECTOR
CONNECTOR CN1
CN1
CN1
CN1
16
16
16
16

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
17
17
17
17

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
Chapter
Chapter
Chapter
Chapter 5.
5.
5.
5. Installation
Installation
Installation
Installation Instructions
Instructions
Instructions
Instructions
5-1.
5-1.
5-1.
5-1. Accessories
Accessories
Accessories
Accessories
Remote Control
18
18
18
18
Batteries

Service Manual
Model
Model
Model
Model No.:
No.:
No.:
No.: 75UF5550
75UF5550
75UF5550
75UF5550
5-2.
5-2.
5-2.
5-2. External
External
External
External Equipment
Equipment
Equipment
Equipment Connections
Connections
Connections
Connections
Antenna
Antenna
Antenna
Antenna Connection
Connection
Connection
Connection
Connect your aerial to the back of the TV into the
ANTENNA IN socket.
Improve
Improve
Improve
Improve Your
Your
Your
Your Signal
Signal
Signal
Signal
To improve picture quality in a poor signal area, use a
signal ampli  er (not supplied).
Connect
Connect
Connect
Connect Your
Your
Your
Your PC
PC
PC
PC to
to
to
to the
the
the
the TV
TV
TV
TV
Connect
Connect
Connect
Connect a
a
a
a DVD
DVD
DVD
DVD Player
Player
Player
Player or
or
or
or VCR
VCR
VCR
VCR to
to
to
to
Your
Your
Your
Your TV
TV
TV
TV
There are two ways in which you can connect a DVD
player or VCR to your TV. Make sure that both the TV
and DVD player or VCR are switched off before you
connect them.
HDMI
HDMI
HDMI
HDMI Input
Input
Input
Input
You can use your TV as a monitor for your personal
computer by connecting it with a VGA cable (not
supplied).
A
Connect the cable from the HDMI device to the TV
HDMI socket.
A
B
Read your computer user guide and check it has a
VGA connector.
Turn off your TV and PC.
B
C
Press the SOURCE
SOURCE
SOURCE
SOURCE button to select HDMI mode.
Refer to the HDMI device user guide for how to
operate.
C
Connect a D type 15-pin VGA interface cable to the
Note ：The TV have no VGA.
VGA video interface connector on the PC. Connect
the other end of the cable to the PC interface
connector on the TV. Tighten the screws on the
D
E
VGA connectors and connect the audio cable (not
supplied) to the audio input socket on the back of the
TV.
Turn on the TV  rstly and then the PC.
Press the Source button on the TV or TV remote
control to set the video input mode to PC.
F
Once the image shows, if there is noise present,
change the PC mode to other resolutions, change the
refresh rate to other rate or adjust the brightness and
contrast on the menu until the picture is clear.
Connect
Connect
Connect
Connect a
a
a
a DVD
DVD
DVD
DVD Player
Player
Player
Player to
to
to
to Your
Your
Your
Your TV
TV
TV
TV
Connect the DVD video outputs (Y, P b, P r) to the
COMPONENT (Y, P b, P r) IN socket on your TV.
A
B
C
Turn on the DVD player and insert a DVD disk.
Press the SOURCE button to select COMPONENT
mode.
Refer to the DVD player user guide for operating
instructions.
19
19
19
19