Haier H50K6UG User manual

+.8*
/(%8*
/(%8*
+.8*

PRECAUTIONS AND REMINDERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PERIPHERAL CONNECTION AND CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAKING CONNECTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PRODUCT SPECIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
5
6
17
18
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS
1
**Actual product may vary inappearance from
above image*

PRECAUTIONS AND REMINDERS
If you are going to clean the product,Unplug the TV,use
soft fabric,no water,never chemicals.
2

PREPARATION
IMPORTANT: Do not apply pressure to the screen display
area which may compromise the integrity of the display.
The manufacturer’s warranty does not cover user abuse
or improper installations.
ATTACHING THE STAND
IMPORTANT: The stand of the TV must be assembled
prior to usage.
1.
(blanket, foam, cloth, etc.) to prevent any damage to
the TV.
PREPARING YOUR LED TV FOR WALL MOUNTING
We suggest that you keep your TV at least 2.36 inches
(60 mm) from the wall to prevent cable interference.
Before mounting your TV on the wall, you need to
remove the stand.
For your safety, please use only with a UL listed wall
mount bracket with minimum weight of the TV without
stand.
To attach a wall mount bracket to your TV:
1. Remove the screws holding your TV to the stand.
2. Remove the stand from your TV.
3. Secure the wall mount bracket to the back of your TV
using four screws. Follow the instructions of the user
manual that came with the wall mount bracket to
install.
TURNING ON THE TV
1. Install the stand and place the TV on a solid surface.
Ensure that the TV is placed in a position to allow free
back cover.
To prevent any unsafe situations, no naked sources,
such as lighted candles, should be placed on or in the
vicinity.
Avoid heat, direct sunlight and exposure to rain or water.
The equipment shall not be exposed to dripping or
splashing.
2. Connect the antenna cable or cable TV cable to the
ANT IN aerial socket on the back of the TV set.
3. Remote control:
Remove the cover of the battery compartment.
Insert 2 batteries (Type AAA 1.5V).
4. Power:
Plug the cord into a working power outlet.
5. Turn the TV on:
Press on the remote control or POWER button on
the side control panel of the TV.
NOTE
The wall mount bracket are not included.
NOTE
The appearance of the product shall be in kind.
Min
1 m
NOTE
2.
Fix the stand to the bottom of the TV with the four
screws.
3

PERIPHERAL CONNECTION AND CONTROLS
PERIPHERAL CONNECTION
All the terminals are(from left to right):
OPTICAL, USB1, RJ45, HDMI1, HDMI2, HDMI3, VIDEO, L, R
All the terminals are(from left to right):
HDMI4(ARC), LNB IN(SATELLITE), ANT IN(ANTENNA/CABLE), CI, MINI YPbPr,
EARPHONE, TF, USB2.
BUTTON CONTROL
BUTTON
Middle key
Up and down keys
Left and right keys
Under the menu page, press the left and right keys to adjust
the volume addition and subtraction.
In the standby mode, press the middle button to turn on the TV.
ACCESSORIES
TV 50”/55”/58”/65”
Remote Control - 1pc
AAA Battery - 2pcs
User's Manual - 1pc
Screws - 4pcs
Mini YPbPr Cable - 1 pc
In the boot state, long press the middle button to shut down.
In the non-menu page, you can adjust the TV channel under the
program addition and subtraction;
Under the menu page, you can move the cursor up and down.
Under the menu page function equivalent to the OK key.
4
EARPHONE TFMINI YPbPr
(CI)
HDMI4
(ARC)
ANT IN
(ANTENNA/CABLE)
LNB IN (SATELLITE)
13V/18V 600mA Max
USB2
USB1
HDMI2 HDMI3
HDMI1
RJ45L- I N - R
VIDEO
OPTICAL

5. AV INPUT: Video input/Audio input.
2. USB: Connect USB device.
1. HDMI: Connect to High-definition multimedia signal resource.
3. YPbPr: Component input terminal.
4. RF: Antennal/close circuit TV
USB1
HDMI2 HDMI3
HDMI1 L R
VIDEO
OPTICAL
1WAN 2 34
CVBS DVD Player or other
machine with YPbPr YCbCr
MAKING CONNECTIONS
5
EARPHONE TFMINI YPbPr
(CI)
HDMI4
(ARC)
ANT IN
(ANTENNA/CABLE)
LNB IN (SATELLITE)
13V/18V 600mA Max
USB2
USB1 HDMI2 HDMI3
HDMI1
RJ45L- I N - R
VIDEO
OPTICAL

OPERATING INSTRUCTIONS
6
MAGIC BOARD.
Press to enter the experiencing center that
Haier preferred.

INITIAL SETUP
will guide
Please according to the Text Tip to First Time Setup.
This function is used for the remote control pair code.
After the code is successful, you can use the
Bluetooth remote control to operate the TV.
Agree to Google to get the location information of
your device to get more features, choose “YES” to
accept.
By agreeing to automatically send diagnostic
information to Google to improve discriminative
power, choose “YES” to accept.
Press to select the country of your device and
press OK
Used to set your device's password to ensure security
and privacy.
1.Your device is powered by Android TV and press
the button to select the browsing feature.
2.You can get more apps from Google Play and press
the button to go to the next screen.
3.Transfer photos and other content to the TV via the
built-in chromecast, press OK to complete the browsing.
Press to select the system language and press
OK
Connect your Android phone to your TV, select
“Continue ” to continue the connection, and choose
“Skip” to skip this step.
OK and
successful.
By accepting the Google Terms of Service to improve
the product experience, select “Accept” to accept this
condition.
you through setting up basic settings.
India
7

Press OK to pop up the soft keyboard, and use the
remote control to enter the 4-digit password auto-
matically jump to the next interface.
Use the remote control to enter the password and
complete the password
Press to select whether to search, select “Scan”
to search, select “Skip scan” to skip the search.
Press OK to complete the setup.
For selecting the mode, press key to select Home
mode and press OK
to the previous step.
To select the Tuner mode for searching, press
to select and press OK
8
Open the google assistant or start a voice search.
Among the applications installed on the TV, the
icons for the favourite applications are shown inside
here. (Favourite applications can be added / deleted /
changed its order by users.)
Apps: Click to jump to Apps screen where all the
installed applications are listed.
Inputs: Icon to select an input source.
Network&Interent:
Settings:
For details on the settings, see the next explanation.
HOME SCREEN
The IOT system is working support towards a more connected
IOT based home appliances ,The simplicity of voice control will
allow the smart television to act as the central access point of the
modern smart home under the standard language & words.
After completing the wizard Settings, you can watch TV
and go to the home screen.
NOTE
Press
features of Chromecast.
Press to select whether to search for
satellite channel.

NAVIGATING THE ON-SCREEN MENU
1. There are two ways to enter. First, in live TV, press
the menu button to display TV options, press
to select the settings menu and press OK to
key to select the icon of the circular settings
menu, press OK
INPUT SOURCE
1. In the HOME interface, press to select
the “Inputs” icon, press OK to open the input source
list, then press up to highlight an input and press
OK to switch.
2. Under live TV, press the SOURCE button to display
the list of input sources. You can select the desired
source. 1. Press / button to select what you want set .
2. Press OK button to adjust.
OK button to
save and return to the previous menu.
2.Press button to select what you want set.
3.Press OK to enter setting.
Press BACK to return to the previous menu. If the main
menu is displayed, pressing BACK will close the
onscreen menu.
Network
9
CHANNEL
Inputs

Channels –
Display the scan sub-menu based on
Antenna –
Cable –
Parental controls –
option then press OK button to enter the sub-menu.
– Press button to select the
Audio Channel
option then press OK button to enter the sub-menu.
Open source licenses – Press button to select the
Press button to select the
Set the signal type to antenna. When set to
Antenna,the TV can receive analog and digital (DVBT/T2)
broadcasting signals.
Set the signal type to cable. When set to Cable,
Satellite – Set the signal type to Satellite. When set to
Satellite, the TV can receive Satellite broadcasting signals.
option then press OK button to enter the sub-menu.
the TV can receive analog and QAM broadcasting signals.
Channel installation mode – Select on-screen display
channel sources. You can select the signal type.
Antenna
1.Menu->Settings->Channel->Channel Installation Mode
enter, choose Antenna.
2. Enter Menu->Settings->Channel->Channels.
3. Channel Scan directl yenters the ATV+DTV
automatic search platform interface of Antenna.
Update Scan: Re-automatically search for frequency
points outside the station.
Analog Manual Scan: Manual ATV search station.
After input the frequency point, you can select up
or down search station.
Single RF Scan: DTV manual search, left and right
after selecting RF Channel, directly OK search.
Cable
1.Menu->Settings->Channel->Channel Installation
Mode, select Cable.
2. Enter Menu->Settings->Channel->Channels.
10
Auto Channel Update – Press OK button to choose ON/OFF.
When selecting ON, the system will automatically scan and
update channels after 5 minutes of standby.

Satellite Re-scan：Satellite automatically searches for
relevant Settings.
1. Press OK to select 'Next' to enter the default satellite
channel search.
2.Select different types of satellite stars and satellite
types.
:
Satellite Manual Tuning：Manually search for a
certain TP, which can be added by Satellite Re-scan
if needed.

OK
OK
DEVICE PREFERENCES
.
OK
R

KEYBOARD
Press / button to select the
option then press OK button to enter the sub-menu.
Current keyboard –
Press / button to select the
option then press OK button to enter the sub-menu.
Gboard Settings –
Press / button to select the
option then press OK button to enter the sub-menu.
Manage keyboards –
INPUTS
Press / button to select the option then
press OK button to enter the sub-menu.
Inputs –
Press / button to select the
Press / button to select
option then press OK button to choose ON/OFF.
HDMI control –
the option then press OK button to choose ON/OFF.
Press / button to select the
option then press OK button to choose ON/OFF.
TV auto power on –
Press / button to select the
option then press OK button to enter the sub-menu.
CEC Device List –
show EDID version.
HDMI EDID Version –
POWER
Sleep Timer
40 minutes, 50 minutes, 60 minutes, 90 minutes,
120 minutes ).
option then press OK button to choose ON/OFF.
– Press button to select the
option then press OK button to enter the sub-menu.
– Press button to select the
120 minutes, 150 minutes, 180 minutes, 210 minutes,
Press / button to
select the option then press OK button to enter the
15 minutes, 30 minutes, 60 minutes ).
240 minutes )
option then press OK button to enter the sub-menu.
– Press button to select the
PICTURE
button to enter the sub-menu. (Optional: user,Standard,
Press / button to select the option
Picture Mode –
Vivid, Sport, Movie, Game, Energy saving).
Sharpness –
Backlight/Brightness/Contrast/Saturation/HUE/
Press / button to select the option.
Press to decrease the parameter. Press t o increase
the parameter.
Press / button to select the option the press
OK
HDR –
Color Temperature – Press / button to select the
Gamma – Press / button to select the option then
press OK button to enter the sub-menu.(Optional: Dark,
middle,Bright).
option then press OK button to enter the sub-menu.
English
Reset to Default – Reset all settings to the factory
defaults.
Advanced Video – Press / button to select the
option then press OK button to enter the sub-menu.
13

SOUND
Speakers – Press / button to select the option
then press OK button to enter the sub-menu.
(Optional:TV Speaker,External Audio System).
Digital Output – Press / button to select the
option then press OK button to enter the sub-menu.
(Optional:Auto,Bypass,PCM ,Dolby Digital Plus,Dolby
Digital).
SPDIF Delay – Press / button to select the
option. Press to decrease the parameter.
Press to increase the parameter.
)
Balance/ Bass/ Treble – Press / button to select
the option. Press to decrease the parameter.
Press to increase the parameter.
Sound Surround – Press / button to select the
option then press OK button to choose ON/OFF.
Equalizer Detail – Press / button to select the
option then press OK button to enter the sub-menu.
Sound style – Press / button to select the
option then press OK button to enter the sub-menu.
(Optional: user,Standard,Vivid,Sports,M ovie,M usic,
News .
Auto Volume Control – Press / button to select
the option then press OK button to choose ON/OFF.
Downmix Mode– Press / button to select the
option then press OK button to enter the sub-menu.
(Optional:Stereo,Surround).
Reset to Default – Reset all settings to t he factory
default
s.
STORAGE
Removable Storage –Press / button to
select the option then press OK button to enter
the sub-menu.( Note:Show external devices if
available)
select the option then press OK button to enter the
sub-menu.
– Press button to
Internal shared storage
HOME SCREEN
3. After nishing your adjustment, Press BACK
button return to the previous menu.
In this menu, you can set channels, apps, open
source licenses.
1. Press / button to select what you want set.
2. Press OK button to adjust.
Retail messaging–Press / button to select
the option then press OK button to enter the
sub-menu.( Note:Demo video,e-POP left,e-POP
bottom)
PQ Demo – option
then press OK button to enter the sub-menu.
( Note:OFF,LEFT,RIGHT)
RETAIL MODE
option then press OK button to choose ON/OFF.
– Press button to select the
Press button to select the
Retail mode
14

ACCESSIBILITY
Audio Description–Press /button to select
the option then press O
K button to choose ON/OFF.
Visually Impaired – Press /
button to select the
option then press OK button to
enter the sub-menu .
(Need:Audio Description O )N
Hearing Impaired – Press / button to select the
option then press OK button to choose ON/OFF.
Captions – Press / button to select the option then
press OK button to e ehtretn. sub -menu
High contrast text – Press / button to select the
option then press OKbutton to choose ON/OFF.
Text to speech – Press ▲/
▲
button to select the option
then press OK button to enter the sub-menu.
Accessibility shortcut – Press /button to select the
option then press OK button to enter the sub-menu.

ADD AND USE OF MULTI MEDIA PLAYER
NOTE
OK
REMOTE&ACCESSORIES

Television picture quality:
50" UHD Digital LED LCD TV
Connectivity:
DTV Tuner Decorder
*
Additional features:
Digital features:
Standby Power
consumption ≤
PRODUCT SPECIFICATION
1230x753x137mm
1117x697x214mm
1117x648x63mm
12.52kg
9.8kg
9.72kg