Hakko Electronics FA-400 User manual

Portable solder smoke absorber that
can be mounted horizontally or
vertically.
Horizontally/vertically mountable "2-Way Plus" tabletop smoke absorber
In addition to horizontal and vertical mounting, an optional arm stand allows a
third mounting style.
Vertically Horizontally
Optional Stand # C1568
Absorbs wide spread of smoke.
Horizontal position provides powerful
smoke absorption with a higher flow rate.
Low profile creates less shade leaving
work area well lit.
* High absorption flow rate, work bench
will not be contaminated.
Stand for easy maneuvering and space
saving.
Allows smoke to absorbed from above the
work bench.

Reduced footprint
The footprint was reduced by approx. 50% when mounted vertically and by 20% when
mounted horizontally compared to our previous model, the HAKKO 493.
The height was also reduced by approx. 20%.
(Units: mm)
Size comparison to previous model (HAKKO 493)
Maintenance
The absorption force at the filter decreases gradually over time as the absorber is
used. When the filter surface becomes completely white, the filter should be replaced.
Avoid moisture on the filter.
Model
No. Packing List
FA-400 HAKKO FA-400 Smoke absorber, Filter and Instruction manual
HAKKO FA-400
Model No. HAKKO FA-400
50Hs 60Hz
110V 18W 15W
120V 19W
220V 19W 16W
230V 22W 18W
Power consumption
240V 24W 19W

Model No. HAKKO FA-400
Vertically 1.0m
3
/min 1.1 m
3
/min
Air flow (w / Filter) Horizontally 0.4 m
3
/min 0.5 m
3
/min
Vertically 1.0m/s 1.1m/s
Air velocity (w/ Filter) Horizontally 2.6m/s 2.9m/s
Dimensions 166(W)×212(H)×113(D)mm
Weight 930g
Accessories Filter (1 pcs.)
130(W) ×130(H) ×10(D)mm
Part No. Part Name Specification
A1001 Filter set Activated-carbon filter, set of 5
Part No. Part Name Specification
C1568 Arm stand With knobs (set of 2, ESD)
B1166 Knob Set of 2, ESD