Hall Technologies February 9, 2022 Page 9 of 17
2. When a key-combination is required, do it in sequence. For example, “【*】+【#】+【F1】”
means press “【*】” first and then press “【#】” and last press “【F1】”.
1. Infrared indicator light
1. Flashing (red): Sending instructions
2. No flashing: do not send instructions
2. Standby, Menu Setting
1. Standby button: turn on or turn off the camera image
2. Menu key: call up the camera OSD menu
3. Pan/Tilt Control
Rotate up: press【 】key Rotate down: press【 】key
Rotate to the left: press the【 】key
Rotate to the right: press the【 】key
Middle position: press【OK】key
Long press the up, down, left, and right rotation buttons,
it will continue to rotate from slow to fast until the end of
the stroke; release it halfway to stop the rotation.
4. Preset position setting, calling, deleting
1. Save the preset position: Long press (within 3s-5s) one
of the number keys 1 to 3, and a preset position
corresponding to the number key will be preset.
2. Call the preset position: directly press the number keys
1 to 3 to call the saved preset position."
3. Delete preset position: Long press (5s) one of the
number keys 1 ～ 3 to delete a preset position corresponding
to the number key.
Note: If the number key is not preset, it is invalid.
5. Zoom Control
1. Zoom in the lens: press the 【 】key
2. Zoom out the lens: press 【 】key
3. Long press these two buttons, it will continue to zoom
in/out; release it halfway and stop.
6. Auto Framing Function On/Off
Turn on/off Auto Framing Function
"
"
