Halo BOLT AIR User manual

To contact us, email us at
[e-mail]
or call 888-907-6274
www.BESTHALO.com
QUICK START GUIDE

*Remember to fully charge your HALO BOLT AIR.
Jump Starng Your Vehicle with the HALO BOLT AIR
1. Plug the jumper cables into your HALO BOLT AIR and
aach jumper cable clamps to car baery.
- Red clamp on posive terminal (+)
- Black clamp on negave terminal (-)
2. Press the “Jump Start” buon and wait for solid green light.
- Pulsing green light indicates safety checks in progress.
- Solid green light indicates ready to start your vehicle.
3. Start your vehicle.
4. Disconnect jumper cable clamps from car baery.
Using the Air Compressor
1. Connect the air hose to the inflatable item using the
appropriate adapter.
2. Press the (+) or (-) buon to set the desired pressure.
3. Begin inflang by pressing the Air Compressor ON/OFF buon.
Charging Your Electronic Devices
1. Connect compable electronic devices to the USB
ports to begin charging.
2. Press the USB ON/OFF buon.
Using the LED Floodlight
Press the Floodlight ON/OFF buon.