Hamilton/Buhl BT010 User manual

Never-Ending Learning Innovation
BT010
Bluetooth®Speaker
80 Little Falls Road, Fairfield, NJ 07004 • 1-800-631-0868 • www.HamiltonBuhl.com
Instruction Manual

2
BT010 Bluetooth®Speaker
Function Buttons
Indicator light and function buttons
Placement position of mobile phone and tablet
3.5mm auxiliary input
Micro USB charge interface
Power switch
Thank you for purchasing HamiltonBuhl’s BT010 Bluetooth®Speaker. Before getting started, please read
the user’s manual carefully to ensure proper operation and optimize performance. This unit
not only offers a stylish appearance, but its compact design offers high delity sound.
Power on the Unit
When power is turned on, the speaker makes a “click-click” sound and the Bluetooth®indicator light will
start ashing.
Connecting Bluetooth®/ NFC:
NOTE:
Some devices may need to remove protective cover before using.
Turn on the Bluetooth®function on your device. If connecting the NFC (Near Field Communication)
enabled devices, make sure to turn on the NFC function in the devices. If the function is available,
turn NFC on. Push the power switch on and move the device close to the “NFC” logo on the speaker
(BT010). The device will automatically pair with the speaker.
If your device does not support the NFC function, turn on the Bluetooth®speaker (BT010) then go to
the Bluetooth®setup menu from your device. When BT010 becomes available in the Bluetooth®
device search mode, select BT010 and pair it manually. Bluetooth® indicator light will ash slowly
after a successful connection, and the speaker will make a “toot” sound.
If BT010 fails to detect any Bluetooth®-enabled devices within ve minutes after power is turned on,
the Bluetooth®function will turn off automatically. In order to re-establish the Bluetooth®connection, it
is necessary to turn the BT010 power switch off and turn it back on again. The Bluetooth®devices that
were connected successfully before will connect automatically when BT010 is activated again.
If connection fails, please power off the device and power it back on and make sure the unit is charged.

3
BT010 Bluetooth®Speaker
Using the device is strictly prohibited when the mobile phone is charging,
the consequences of improper use may cause damage to the device.
Problem Solutions
Unable to pair up with devices
1. Turn off BT010 and turn it back again to search any
Bluetooth®-enabled devices.
2. There are too many Bluetooth®devices in the proximity
that cause difculty in connection. Please turn them off.
The sound is low or distorted
1. Check the connected Bluetooth®enabled device’s
volume level and adjust it to proper level.
2. Recharge the battery.
The sound stops from time to time
1. Check the distance between BT010 and the connected
Bluetooth®enabled device is within a proper operational
range. If not, move the sourcing device closer to BT010.
2. Avoid any obstacle between BT010 and the sourcing
device (e.g., wall, large furnitures, etc.)
The Bluetooth®indicator remains off 1. Low battery, please recharge the unit
BT010 Product Specications
• Bluetooth® V4.0
• Transmission Distance: ≤10M (depending upon operational environmental and source devices)
• USB Recharge Voltage: DC 5V/1050mA
• Built-in Lithium battery
• Charge Time: 4-6 hrs
• Output Power: 5W×2
• Frequency Response: 90Hz-20KHz
• Sensitivity: 80dB±2dB
• Signal to Noise Ratio (SNR): ≥76dB
• Dimensions: 9.5” x 2.4” x 1.6” (240 x 62 x 41 mm)
Compatibility
Wireless: Devices congured with Bluetooth®V2.1+EDR or higher version such as iPad™, iPhone™
Troubleshooting
What’s in the Box
• One BT010 Bluetooth®Speaker
• One USB Power Cable
• Instruction Manual

4
BT010 Bluetooth®Speaker
Product Registration Instructions
Visit: www.HamiltonBuhl.com
1. Click on Customer Care
2. Click on Product Registration Icon
3. Please fill out all fields marked with * to register
W
A
R
R
A
N
T
Y
Warranty:
Warranty begins the date item ships from our warehouse. All products, except for metal carts,
have a one year warranty from original date of shipment, unless otherwise noted. Metal carts
have a limited lifetime warranty on all housing components; however, carts have a one year
warranty on any electrical / mechanical components.
Our Mission:
Since our founding in 1933, HamiltonBuhl continues to evolve as a leader in technology
products for education and industry. Our products are embraced by educators, corporate
trainers, presenters, government agencies, and hospitals for their daily presentation, from
the classroom to the boardroom, HamiltonBuhl has the presentation product for you.
BT010 — 12/2016
v.3
Bluetooth®Music Playback
Press and hold “ ” to pause during playback; Press “ ” again to play.
Hands-Free Calls
After connected with the mobile phone successfully, the speaker will beep when a call comes in.
Press to answer the call and talk. No need to pick up the phone. Press again to hang up
the call. To refuse a call, hold down the button. Double click on “ ” button to redial the last phone
number at Bluetooth®connection state.
AUX Playback
Insert audio cable into AUX input of BT010 from your source devices then the AUX indicator will light up.
1. For AUX playback press “ / ” to pause and press “ / ” again to resume sound.
2. The speaker will turn off automatically after 5 minutes without a connection.
To reactivate BT010, use the On/Off switch to turn it back on gain.
Charging
Insert the Micro USB end into the USB power jack of the speaker. Connect the opposite end to a
computer USB port or USB charger. The charging indicator light will be off after charging is complete.
Precautions
Please store and use this product at the room temperature; Do not expose this product to the rain or
damp surroundings; Dismantling or modifying this item in any way, voids the warranty;